Zigbee communcation with Hue, Xiaomi, Lighttify... via TI CC2xxx USB stick

An open source ZigBee gateway solution with node.js.

Database of Zigbee devices compatible with third party gateways: ZHA, deCONZ, Zigbee2MQTT, Tasmota, Zigbee4Domoticz, ioBroker,

PTVO firmware for CC2530, CC2531, and CC2652 Zigbee chips

control the matrix intercom using Zigbee

The interface for a host to communicate with TI CC253X Zigbee Network Processor(ZNP) over a serial port.

Geiger counter

Burn HM-10 (CC2541) and Zigbee (CC2530 CC2531) firmware using NodeMCU board.

Zigbee USB power monitor and switch

Zigbee coordinator and tools for LuaJIT

Implementation of a ZNP and support code designed to interface with Texas Instruments Z-Stack, written in Go.

Zigbee DIY device development board with CC2530 onboard compatible with all your Uno shields

An intelligent temperature, humidity and light monitoring system that integrates CC2530 chip control, Zigbee wireless communication protocol, and QT CreaterC++ user interface

Implementation of Texas Instruments Unified Network Processor Interface frame protocol in Go.

Zigbee Hat for Raspberry Pi and Home Assistant

上海科技大学气瓶管理系统. 无盈利-non-commerical. 基于Zigbee组网,低功耗分布式

Experimental ZigBee end device for CC2530 platform

ESP32 based roller gate controller with ZigBee remotes

get data form Humi & Temp & Light sensor then send it to Remote Service with GSM model (TCP)

This project facilitates communication between APS solar inverters and an ESP32 using a Zigbee CC2530 module. Developed with the Arduino framework on PlatformIO, it enables remote monitoring and control of the inverter's parameters via Zigbee protocol.