Duplicate MasterNode (dupmn)

A script to easily create and manage multiple masternodes of the same coin in the same VPS, can be easily adapted for almost any other coin by creating a profile.

Note: For any technical question not resolved in this readme, check the FAQ.

Index

• How to install
• Commands
• Usage example
• Profile creation
• Considerations
• Additional

How to install

On your VPS type:

curl -sL https://raw.githubusercontent.com/neo3587/dupmn/master/dupmn_install.sh | sudo -E bash -

And that's all, the script is already installed. Check the Usage example to see the guide of the steps to follow.

Commands

• dupmn profadd <profile_file> [new_profile_name] : Adds a profile with the given name that will be used to create dupes of the masternode.
• dupmn profdel <profile_name> : Deletes the saved profile with the given name and uninstalls the dupes made with that profile.
• dupmn install <profile_name> [params...] : Install a new dupe based on the parameters of the given profile name. Optional [params] list:
  -i IP, --ip=IP : Use a specific IPv4 or IPv6.
  -r RPC, --rpcport=RPC : Use a specific port for RPC commands (must be valid and not in use).
  -p KEY, --privkey=KEY : Set a user-defined masternode private key.
  -b, --bootstrap : Apply a bootstrap during the installation.
• dupmn reinstall <profile_name> <node> [params...] : Reinstalls the specified node number, this is just in case if the instance is giving problems. Optional [params] list:
  -i IP, --ip=IP : Use a specific IPv4 or IPv6.
  -r RPC, --rpcport=RPC : Use a specific port for RPC commands (must be valid and not in use).
  -p KEY, --privkey=KEY : Set a user-defined masternode private key.
  -b, --bootstrap : Apply a bootstrap during the reinstallation.
• dupmn uninstall <profile_name> <node...|all> : Uninstall one or many nodes dupes of the given profile name, you can put all instead of a node number to uninstall all the dupes.
• dupmn bootstrap <profile_name> <node_1> <node_2> : Copies the stored chain from the node_1 to the node_2.
• dupmn iplist : Shows your current IPv4 and IPv6 addresses.
• dupmn ipadd <ip> <netmask> [interface] : Adds an IPv4 or IPv6 address.
• dupmn ipdel <ip> <netmask> [interface] : Deletes an IPv4 or IPv6 address.
• dupmn rpcchange <profile_name> <node> [port] : Changes the rpc port of the given node number, this is only in case that by chance it causes a conflict with another application that uses the same port (if no port is provided, it will automatically find any free port).
• dupmn systemctlall <profile_name> <command> : Applies the systemctl command to all services created with the given profile (will only affect the main node too if the profile haves the COIN_SERVICE parameter).
• dupmn list [profile_names...] [params...] : Shows the amount of duplicated instances of every masternode, if a profile name/s are provided, it lists an extended info of the profile/s instances. Optional [params...] list:
  -a, --all : Use all the available params below.
  -o, --online : Show if the node is active or not.
  -b, --blockcount : Show the current block number.
  -s, --status : Show the masternode status message.
  -i, --ip : Show the ip and port.
  -r, --rpcport : Show the rpc port.
  -p, --privkey : Show the masternode private key.
• dupmn swapfile <size_in_mbytes> : Creates/changes or deletes (if value is 0) a swapfile to increase the virtual memory, allowing to fit more masternodes in the same VPS, recommended size is 150 MB for each masternode (example: 3 masternodes => dupmn swapfile 450), note that some masternodes might be more 'RAM hungry'.
• dupmn checkmem : Shows the RAM usage (in %) of each node group.
• dupmn help : Just shows the available commands in the console.
• dupmn update : Checks the last version of the script and updates it if necessary.

Note: <parameter> means required, [parameter] means optional, parameter... means 1 or more parameters, param1|param2 means either param1 or param2, all node are always a number that refers to a dupe (0 is the main node and is allowed in some commands)
Note 2: Check the Commands Page for extended info and usage examples of each command.

Usage example

Usage example based on the MCPCoin profile:

First install the dupmn script (only needs to be done once):

curl -sL https://raw.githubusercontent.com/neo3587/dupmn/master/dupmn_install.sh | sudo -E bash -

Then add the coin profile (if the profile doesn't exists in the profiles folder, then check Profile creation):

wget -q https://raw.githubusercontent.com/neo3587/dupmn/master/profiles/MCPCoin.dmn
dupmn profadd MCPCoin.dmn MCPCoin

Now the MCPCoin profile is saved and the downloaded file can be removed if you want: rm -rf MCPCoin.dmn (you won't need to run the profadd command anymore for this coin).

Let's create 3 extra instances (Note that you MUST already have installed the MCPCoin node in the VPS, the script cannot obtain the binaries from nowhere):

dupmn install MCPCoin 
dupmn install MCPCoin
dupmn install MCPCoin

Every instance has it own private key, it will be shown after installing the new instance, also can be seen with dupmn list MCPCoin.

Now you can manage every instance like this:

MCPCoin-cli-1 masternode status
MCPCoin-cli-2 getblockcount
MCPCoin-cli-3 getinfo
MCPCoin-cli-all masternode status

There's also a MCPCoin-cli-0, but is just a reference to the 'main node', not a created one with dupmn.

When you get tired of one masternode, per example the 3rd instance, then just uninstall it with:

dupmn uninstall MCPCoin 3

Or you can even uninstall them all (except the 'main node') with:

dupmn uninstall MCPCoin all

The new masternode instances will use the same IP and port, so the masternode.conf will look like this:

MN01 123.45.67.89:49451 4xbupX4SFDqettRaKSkLB5hoCVJbTBmK5UfDcja5o5y2C3E3mWZ a4d79e50933ce430a3b2874738a156f3ecb866e598d7c9ecf3382902e2d29afd 0
MN02 123.45.67.89:49451 4y9xiAx7npcE88gCjqbQfYJHkvgY4V2of9T87gd2qyACohH8SpQ 26072b1000545db553c425c776cea9d29ef341512dd88b7522419db7dd952ebc 0
MN03 123.45.67.89:49451 4xP6ZwspdJ6qRwzZUZW4VSLXxR3z15zYnwA6wc1CUWk9pCdjrA2 349acfcf2ea88ab0f9f165ebfd4b98273e260b813b757242e1f371d7075d3f94 1
MN04 123.45.67.89:49451 4yUJe3fzQ8t11ukVULUrKfHUswujAwRWi33tTXp41rsEc9PENM8 6dbff523ae79c29c48bcd77231f15c0b8354daa2ea32cb46ed0dd0fe31ec7e82 0

Using dupmn install MCPCoin will show you the masternode private key for that instance, the transaction must be obviosuly different for each masternode, you can't use the same transaction to run 2 masternodes, even if they're in the same VPS.

Note: dupmn install MCPCoin will show you also a different rpc port, this is NOT the port that you have to add in the masternode.conf file, every masternode will use the same port (49451 in case of MCPCoin).

Profile creation

You can easily create your own profile to fit with any other coin:

COIN_NAME="OtherCoin"             # Name of the coin
COIN_PATH="/usr/local/bin/"       # NOT required parameter, location of the daemon and cli (only required if they're not in /usr/local/bin/ or /usr/bin/)
COIN_DAEMON="OtherCoind"          # Name of the daemon
COIN_CLI="OtherCoin-cli"          # Name of the cli
COIN_FOLDER="/root/.OtherCoin"    # Folder where the conf file and blockchain are stored
COIN_CONFIG="OtherCoin.conf"      # Name of the conf file
RPC_PORT=45454                    # NOT required parameter, it's just to force to start looking from a specific rpc port for those coins that doesn't have a rpcport parameter in the .conf file or that the main node rpc port is not between 1024 and 49451 (otherwise it will start looking at 1024).
COIN_SERVICE="OtherCoin.service"  # NOT required parameter, if you have a service for the main node, add this parameter for the systemctlall and bootstrap commands.
FORCE_LISTEN=1                    # USE ONLY IF THE MASTERNODE FORCES YOU TO HAVE listen=1 ON THE .CONF FILE, some mns forces you to use a different IP for each MN, but a few of them also forces you to listen a binded socket, this parameter will change how the dupes are installed to work with them (NOTE: they usually will force you to use a IPv4).

As with the Usage example, you just need to type these commands to create a new duplicated masternode:

dupmn profadd othercoin.dmn othercoin
dupmn install othercoin

Note: The .dmn extension is completely optional, it is done in this way to differentiate the profile file from others.

Considerations

A VPS doesn't have unlimited resources, creating too many instances may cause Out-Of-Memory error since MNs are a bit "RAM hungry" (can be partially fixed with dupmn swapfile command), there's also a limited hard-disk space and the blockchain increases in size everyday (so be sure to have a lot of free hard disk space, can be checked with df -h), and VPS providers usually puts a limit on monthly network bandwith (so running too many instances may get you to that limit).

Additional

BTC Donations:   3F6J19DmD5jowwwQbE9zxXoguGPVR716a7
ETH Donations:   0x7F9D6d654aEb3375A2974294a0911223d5d1DA52
LTC Donations:   MToq5nZkGh9TWpfQAEjue8ERFcaz6GFB57
DOGE Donations:  DK19TK7gex1j5gfJ5bebXcnCmwUjbhMHST
MCPC Donations:  MCwe8WxWNmcZL1CpdpG3yuudGYVphmTSLE