Project Description

This project demonstrates the basics of using the MJD component "mjd_bmp280" for the popular Bosch BMP280 meteo sensor.

Use it to get insights in how to use this component.

Goto the component "components/mjd_bmp280" for installation and usage/wiring instructions, data sheets, FAQ, photo's, etc. for the hardware and software.

What are the HW SW requirements of the ESP32 MJD Starter Kit?

Hardware

• A decent ESP development board. I suggest to buy a popular development board with good technical documentation and a significant user base. Examples: Adafruit HUZZAH32, Espressif ESP32-DevKitC, Pycom WiPy, Wemos D32.
• The peripherals that are used in the project. @tip The README of each component contains a section "Shop Products". @example A Bosch BME280 meteo sensor breakout board.

Software: ESP-IDF v3.2

• A working installation of the Espressif ESP-IDF V3.2 development framework** (detailed instructions @ http://esp-idf.readthedocs.io/en/latest/get-started/index.html ).

mkdir ~/esp
cd    ~/esp
git clone -b v3.2 --recursive https://github.com/espressif/esp-idf.git esp-idf-v3.2

• A C language editor or the Eclipse IDE CDT (instructions also @ http://esp-idf.readthedocs.io/en/latest/get-started/index.html).

Running the example

• Run make menuconfig and modify for example the GPIO PIN# that you want to use.
• Run make flash monitor to build and upload the example to your board and connect to its serial terminal.

Reference: the ESP32 MJD Starter Kit SDK

Do you also want to create innovative IoT projects that use the ESP32 chip, or ESP32-based modules, of the popular company Espressif? Well, I did and still do. And I hope you do too.

The objective of this well documented Starter Kit is to accelerate the development of your IoT projects for ESP32 hardware using the ESP-IDF framework from Espressif and get inspired what kind of apps you can build for ESP32 using various hardware modules.

Go to https://github.com/pantaluna/esp32-mjd-starter-kit