This is release v1.2.0 of Intel Open Image Denoise. For changes and new features see the changelog. Visit http://www.openimagedenoise.org for more information.
Intel Open Image Denoise is an open source library of high-performance, high-quality denoising filters for images rendered with ray tracing. Intel Open Image Denoise is part of the Intel® oneAPI Rendering Toolkit and is released under the permissive Apache 2.0 license.
The purpose of Intel Open Image Denoise is to provide an open, high-quality, efficient, and easy-to-use denoising library that allows one to significantly reduce rendering times in ray tracing based rendering applications. It filters out the Monte Carlo noise inherent to stochastic ray tracing methods like path tracing, reducing the amount of necessary samples per pixel by even multiple orders of magnitude (depending on the desired closeness to the ground truth). A simple but flexible C/C++ API ensures that the library can be easily integrated into most existing or new rendering solutions.
At the heart of the Intel Open Image Denoise library is a collection of efficient deep learning based denoising filters, which were trained to handle a wide range of samples per pixel (spp), from 1 spp to almost fully converged. Thus it is suitable for both preview and final-frame rendering. The filters can denoise images either using only the noisy color (beauty) buffer, or, to preserve as much detail as possible, can optionally utilize auxiliary feature buffers as well (e.g. albedo, normal). Such buffers are supported by most renderers as arbitrary output variables (AOVs) or can be usually implemented with little effort.
Although the library ships with a set of pre-trained filter models, it is not mandatory to use these. To optimize a filter for a specific renderer, sample count, content type, scene, etc., it is possible to train the model using the included training toolkit and user-provided image datasets.
Intel Open Image Denoise supports Intel® 64 architecture based CPUs and compatible architectures, and runs on anything from laptops, to workstations, to compute nodes in HPC systems. It is efficient enough to be suitable not only for offline rendering, but, depending on the hardware used, also for interactive ray tracing.
Intel Open Image Denoise internally builds on top of Intel® Deep Neural Network Library (DNNL), and automatically exploits modern instruction sets like Intel SSE4, AVX2, and AVX-512 to achieve high denoising performance. A CPU with support for at least SSE4.1 is required to run Intel Open Image Denoise.
Intel Open Image Denoise is under active development, and though we do our best to guarantee stable release versions a certain number of bugs, as-yet-missing features, inconsistencies, or any other issues are still possible. Should you find any such issues please report them immediately via the Intel Open Image Denoise GitHub Issue Tracker (or, if you should happen to have a fix for it, you can also send us a pull request); for missing features please contact us via email at openimagedenoise@googlegroups.com.
For recent news, updates, and announcements, please see our complete news/updates page.
Join our mailing list to receive release announcements and major news regarding Intel Open Image Denoise.
The latest Intel Open Image Denoise sources are always available at the
Intel Open Image Denoise GitHub
repository. The default
master branch should always point to the latest tested bugfix release.
You can clone the latest Intel Open Image Denoise sources using Git with the Git Large File Storage (LFS) extension:
git clone --recursive https://github.com/OpenImageDenoise/oidn.git
Intel Open Image Denoise currently supports 64-bit Linux, Windows, and macOS operating systems. In addition, before you can build Intel Open Image Denoise you need the following prerequisites:
-
CMake 3.1 or later
-
A C++11 compiler (we recommend using Clang, but also support GCC, Microsoft Visual Studio 2015 or later, and Intel® C++ Compiler 17.0 or later)
-
Intel® SPMD Program Compiler (ISPC), version 1.12.0 or later. Please obtain a release of ISPC from the ISPC downloads page. The build system looks for ISPC in the
PATHand in the directory right “next to” the checked-out Intel Open Image Denoise sources.[1] Alternatively set the CMake variableISPC_EXECUTABLEto the location of the ISPC compiler. -
Python 2.7 or later
-
Intel® Threading Building Blocks (TBB) 2017 or later
Depending on your Linux distribution you can install these dependencies
using yum or apt-get. Some of these packages might already be
installed or might have slightly different names.
Type the following to install the dependencies using yum:
sudo yum install cmake
sudo yum install tbb-devel
Type the following to install the dependencies using apt-get:
sudo apt-get install cmake-curses-gui
sudo apt-get install libtbb-dev
Under macOS these dependencies can be installed using MacPorts:
sudo port install cmake tbb
Under Windows please directly use the appropriate installers or packages for CMake, Python, and TBB.
Assuming the above prerequisites are all fulfilled, building Intel Open Image Denoise through CMake is easy:
-
Create a build directory, and go into it
mkdir oidn/build cd oidn/build(We do recommend having separate build directories for different configurations such as release, debug, etc.).
-
The compiler CMake will use by default will be whatever the
CCandCXXenvironment variables point to. Should you want to specify a different compiler, run cmake manually while specifying the desired compiler. The default compiler on most Linux machines isgcc, but it can be pointed toclanginstead by executing the following:cmake -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_C_COMPILER=clang ..CMake will now use Clang instead of GCC. If you are OK with using the default compiler on your system, then simply skip this step. Note that the compiler variables cannot be changed after the first
cmakeorccmakerun. -
Open the CMake configuration dialog
ccmake .. -
Make sure to properly set the build mode and enable the components you need, etc.; then type ’c’onfigure and ’g’enerate. When back on the command prompt, build it using
make -
You should now have
libOpenImageDenoise.soas well as a set of example applications.
macOS requires notarization of applications as a security mechanism, and
entitlements must be
declared
during the notarization process.
Intel Open Image Denoise uses just-in-time compilaton through the Intel
Deep Neural Network Library and
requires the following entitlements:
com.apple.security.cs.allow-jitcom.apple.security.cs.allow-unsigned-executable-memorycom.apple.security.cs.disable-executable-page-protection
On Windows using the CMake GUI (cmake-gui.exe) is the most convenient
way to configure Intel Open Image Denoise and to create the Visual
Studio solution files:
-
Browse to the Intel Open Image Denoise sources and specify a build directory (if it does not exist yet CMake will create it).
-
Click “Configure” and select as generator the Visual Studio version you have (Intel Open Image Denoise needs Visual Studio 14 2015 or newer), for Win64 (32-bit builds are not supported), e.g., “Visual Studio 15 2017 Win64”.
-
If the configuration fails because some dependencies could not be found then follow the instructions given in the error message, e.g., set the variable
TBB_ROOTto the folder where TBB was installed. -
Optionally change the default build options, and then click “Generate” to create the solution and project files in the build directory.
-
Open the generated
OpenImageDenoise.slnin Visual Studio, select the build configuration and compile the project.
Alternatively, Intel Open Image Denoise can also be built without any GUI, entirely on the console. In the Visual Studio command prompt type:
cd path\to\oidn
mkdir build
cd build
cmake -G "Visual Studio 15 2017 Win64" [-D VARIABLE=value] ..
cmake --build . --config Release
Use -D to set variables for CMake, e.g., the path to TBB with “-D TBB_ROOT=\path\to\tbb”.
The default CMake configuration in the configuration dialog should be appropriate for most usages. The following list describes the options that can be configured in CMake:
-
CMAKE_BUILD_TYPE: Can be used to switch between Debug mode (Debug), Release mode (Release) (default), and Release mode with enabled assertions and debug symbols (RelWithDebInfo). -
OIDN_STATIC_LIB: Build Intel Open Image Denoise as a static library (OFF by default). CMake 3.13.0 or later is required to enable this option. When using the statically compiled Intel Open Image Denoise library, you either have to use the generated CMake configuration files (recommended), or you have to manually defineOIDN_STATIC_LIBbefore including the library headers in your application. -
OIDN_STATIC_RUNTIME: Use the static version of the C/C++ runtime library (available only on Windows, ON by default). -
OIDN_APPS: Enable building example and test applications (ON by default). -
OIDN_APPS_OPENIMAGEIO: Enable OpenImageIO support in the example and test applications to be able to load/save OpenEXR, PNG, and other image file formats (OFF by default). -
TBB_ROOT: The path to the TBB installation (autodetected by default). -
OPENIMAGEIO_ROOT: The path to the OpenImageIO installation (autodetected by default).
The following API documentation of Intel Open Image Denoise can also be found as a pdf document.
Intel Open Image Denoise provides a C99 API (also compatible with C++) and a C++11 wrapper API as well. For simplicity, this document mostly refers to the C99 version of the API.
The API is designed in an object-oriented manner, e.g. it contains
device objects (OIDNDevice type), buffer objects (OIDNBuffer type),
and filter objects (OIDNFilter type). All objects are
reference-counted, and handles can be released by calling the
appropriate release function (e.g. oidnReleaseDevice) or retained by
incrementing the reference count (e.g. oidnRetainDevice).
An important aspect of objects is that setting their parameters do not have an immediate effect (with a few exceptions). Instead, objects with updated parameters are in an unusable state until the parameters get explicitly committed to a given object. The commit semantic allows for batching up multiple small changes, and specifies exactly when changes to objects will occur.
All API calls are thread-safe, but operations that use the same device will be serialized, so the amount of API calls from different threads should be minimized.
To have a quick overview of the C99 and C++11 APIs, see the following simple example code snippets.
#include <OpenImageDenoise/oidn.h>
...
// Create an Intel Open Image Denoise device
OIDNDevice device = oidnNewDevice(OIDN_DEVICE_TYPE_DEFAULT);
oidnCommitDevice(device);
// Create a denoising filter
OIDNFilter filter = oidnNewFilter(device, "RT"); // generic ray tracing filter
oidnSetSharedFilterImage(filter, "color", colorPtr,
OIDN_FORMAT_FLOAT3, width, height, 0, 0, 0);
oidnSetSharedFilterImage(filter, "albedo", albedoPtr,
OIDN_FORMAT_FLOAT3, width, height, 0, 0, 0); // optional
oidnSetSharedFilterImage(filter, "normal", normalPtr,
OIDN_FORMAT_FLOAT3, width, height, 0, 0, 0); // optional
oidnSetSharedFilterImage(filter, "output", outputPtr,
OIDN_FORMAT_FLOAT3, width, height, 0, 0, 0);
oidnSetFilter1b(filter, "hdr", true); // image is HDR
oidnCommitFilter(filter);
// Filter the image
oidnExecuteFilter(filter);
// Check for errors
const char* errorMessage;
if (oidnGetDeviceError(device, &errorMessage) != OIDN_ERROR_NONE)
printf("Error: %s\n", errorMessage);
// Cleanup
oidnReleaseFilter(filter);
oidnReleaseDevice(device);#include <OpenImageDenoise/oidn.hpp>
...
// Create an Intel Open Image Denoise device
oidn::DeviceRef device = oidn::newDevice();
device.commit();
// Create a denoising filter
oidn::FilterRef filter = device.newFilter("RT"); // generic ray tracing filter
filter.setImage("color", colorPtr, oidn::Format::Float3, width, height);
filter.setImage("albedo", albedoPtr, oidn::Format::Float3, width, height); // optional
filter.setImage("normal", normalPtr, oidn::Format::Float3, width, height); // optional
filter.setImage("output", outputPtr, oidn::Format::Float3, width, height);
filter.set("hdr", true); // image is HDR
filter.commit();
// Filter the image
filter.execute();
// Check for errors
const char* errorMessage;
if (device.getError(errorMessage) != oidn::Error::None)
std::cout << "Error: " << errorMessage << std::endl;Intel Open Image Denoise supports a device concept, which allows different components of the application to use the Open Image Denoise API without interfering with each other. An application first needs to create a device with
OIDNDevice oidnNewDevice(OIDNDeviceType type);where the type enumeration maps to a specific device implementation,
which can be one of the following:
| Name | Description |
|---|---|
| OIDN_DEVICE_TYPE_DEFAULT | select the approximately fastest device |
| OIDN_DEVICE_TYPE_CPU | CPU device (requires SSE4.1 support) |
Supported device types, i.e., valid constants of type OIDNDeviceType.
Once a device is created, you can call
void oidnSetDevice1b(OIDNDevice device, const char* name, bool value);
void oidnSetDevice1i(OIDNDevice device, const char* name, int value);
bool oidnGetDevice1b(OIDNDevice device, const char* name);
int oidnGetDevice1i(OIDNDevice device, const char* name);to set and get parameter values on the device. Note that some parameters are constants, thus trying to set them is an error. See the tables below for the parameters supported by devices.
| Type | Name | Default | Description |
|---|---|---|---|
| const int | version | combined version number (major.minor.patch) with two decimal digits per component | |
| const int | versionMajor | major version number | |
| const int | versionMinor | minor version number | |
| const int | versionPatch | patch version number | |
| int | verbose | 0 | verbosity level of the console output between 0–4; when set to 0, no output is printed, when set to a higher level more output is printed |
Parameters supported by all devices.
| Type | Name | Default | Description |
|---|---|---|---|
| int | numThreads | 0 | maximum number of threads which the library should use; 0 will set it automatically to get the best performance |
| bool | setAffinity | true | bind software threads to hardware threads if set to true (improves performance); false disables binding |
Additional parameters supported only by CPU devices.
Note that the CPU device heavily relies on setting the thread affinities
to achieve optimal performance, so it is highly recommended to leave
this option enabled. However, this may interfere with the application if
that also sets the thread affinities, potentially causing performance
degradation. In such cases, the recommended solution is to either
disable setting the affinities in the application or in Intel Open Image
Denoise, or to always set/reset the affinities before/after each
parallel region in the application (e.g., if using TBB, with
tbb::task_arena and tbb::task_scheduler_observer).
Once parameters are set on the created device, the device must be committed with
void oidnCommitDevice(OIDNDevice device);This device can then be used to construct further objects, such as buffers and filters. Note that a device can be committed only once during its lifetime. Before the application exits, it should release all devices by invoking
void oidnReleaseDevice(OIDNDevice device);Note that Intel Open Image Denoise uses reference counting for all object types, so this function decreases the reference count of the device, and if the count reaches 0 the device will automatically get deleted. It is also possible to increase the reference count by calling
void oidnRetainDevice(OIDNDevice device);An application typically creates only a single device. If required differently, it should only use a small number of devices at any given time.
Each user thread has its own error code per device. If an error occurs when calling an API function, this error code is set to the occurred error if it stores no previous error. The currently stored error can be queried by the application via
OIDNError oidnGetDeviceError(OIDNDevice device, const char** outMessage);where outMessage can be a pointer to a C string which will be set to a
more descriptive error message, or it can be NULL. This function also
clears the error code, which assures that the returned error code is
always the first error occurred since the last invocation of
oidnGetDeviceError on the current thread. Note that the optionally
returned error message string is valid only until the next invocation of
the function.
Alternatively, the application can also register a callback function of type
typedef void (*OIDNErrorFunction)(void* userPtr, OIDNError code, const char* message);via
void oidnSetDeviceErrorFunction(OIDNDevice device, OIDNErrorFunction func, void* userPtr);to get notified when errors occur. Only a single callback function can
be registered per device, and further invocations overwrite the
previously set callback function, which do not require also calling
the oidnCommitDevice function. Passing NULL as function pointer
disables the registered callback function. When the registered callback
function is invoked, it gets passed the user-defined payload (userPtr
argument as specified at registration time), the error code (code
argument) of the occurred error, as well as a string (message
argument) that further describes the error. The error code is always set
even if an error callback function is registered. It is recommended to
always set a error callback function, to detect all errors.
When the device construction fails, oidnNewDevice returns NULL as
device. To detect the error code of a such failed device construction,
pass NULL as device to the oidnGetDeviceError function. For all
other invocations of oidnGetDeviceError, a proper device handle must
be specified.
The following errors are currently used by Intel Open Image Denoise:
| Name | Description |
|---|---|
| OIDN_ERROR_NONE | no error occurred |
| OIDN_ERROR_UNKNOWN | an unknown error occurred |
| OIDN_ERROR_INVALID_ARGUMENT | an invalid argument was specified |
| OIDN_ERROR_INVALID_OPERATION | the operation is not allowed |
| OIDN_ERROR_OUT_OF_MEMORY | not enough memory to execute the operation |
| OIDN_ERROR_UNSUPPORTED_HARDWARE | the hardware (e.g., CPU) is not supported |
| OIDN_ERROR_CANCELLED | the operation was cancelled by the user |
Possible error codes, i.e., valid constants of type OIDNError.
Large data like images can be passed to Intel Open Image Denoise either
via pointers to memory allocated and managed by the user (this is the
recommended, often easier and more efficient approach, if supported by
the device) or by creating buffer objects (supported by all devices). To
create a new data buffer with memory allocated and owned by the device,
holding byteSize number of bytes, use
OIDNBuffer oidnNewBuffer(OIDNDevice device, size_t byteSize);The created buffer is bound to the specified device (device argument).
The specified number of bytes are allocated at buffer construction time
and deallocated when the buffer is destroyed.
It is also possible to create a “shared” data buffer with memory allocated and managed by the user with
OIDNBuffer oidnNewSharedBuffer(OIDNDevice device, void* ptr, size_t byteSize);where ptr points to the user-managed memory and byteSize is its size
in bytes. At buffer construction time no buffer data is allocated, but
the buffer data provided by the user is used. The buffer data must
remain valid for as long as the buffer may be used, and the user is
responsible to free the buffer data when no longer required.
Similar to device objects, buffer objects are also reference-counted and can be retained and released by calling the following functions:
void oidnRetainBuffer(OIDNBuffer buffer);
void oidnReleaseBuffer(OIDNBuffer buffer);Accessing the data stored in a buffer object is possible by mapping it into the address space of the application using
void* oidnMapBuffer(OIDNBuffer buffer, OIDNAccess access, size_t byteOffset, size_t byteSize)where access is the desired access mode of the mapped memory,
byteOffset is the offset to the beginning of the mapped memory region
in bytes, and byteSize is the number of bytes to map. The function
returns a pointer to the mapped buffer data. If the specified byteSize
is 0, the maximum available amount of memory will be mapped. The
access argument must be one of the access modes in the following
table:
| Name | Description |
|---|---|
| OIDN_ACCESS_READ | read-only access |
| OIDN_ACCESS_WRITE | write-only access |
| OIDN_ACCESS_READ_WRITE | read and write access |
| OIDN_ACCESS_WRITE_DISCARD | write-only access but the previous contents will be discarded |
Access modes for memory regions mapped with oidnMapBuffer, i.e., valid
constants of type OIDNAccess.
After accessing the mapped data in the buffer, the memory region must be unmapped with
void oidnUnmapBuffer(OIDNBuffer buffer, void* mappedPtr);where mappedPtr must be a pointer returned by a call to
oidnMapBuffer for the specified buffer. Any change to the mapped data
is guaranteed to take effect only after unmapping the memory region.
Buffers store opaque data and thus have no information about the type
and format of the data. Other objects, e.g. filters, typically require
specifying the format of the data stored in buffers or shared via
pointers. This can be done using the OIDNFormat enumeration type:
| Name | Description |
|---|---|
| OIDN_FORMAT_UNDEFINED | undefined format |
| OIDN_FORMAT_FLOAT | 32-bit single-precision floating point scalar |
| OIDN_FORMAT_FLOAT[234] | … and [234]-element vector |
Supported data formats, i.e., valid constants of type OIDNFormat.
Filters are the main objects in Intel Open Image Denoise that are responsible for the actual denoising. The library ships with a collection of filters which are optimized for different types of images and use cases. To create a filter object, call
OIDNFilter oidnNewFilter(OIDNDevice device, const char* type);where type is the name of the filter type to create. The supported
filter types are documented later in this section. Once created, filter
objects can be retained and released with
void oidnRetainFilter(OIDNFilter filter);
void oidnReleaseFilter(OIDNFilter filter);After creating a filter, it needs to be set up by specifying the input and output images, and potentially setting other parameter values as well.
To bind images to the filter, you can use one of the following functions:
void oidnSetFilterImage(OIDNFilter filter, const char* name,
OIDNBuffer buffer, OIDNFormat format,
size_t width, size_t height,
size_t byteOffset,
size_t bytePixelStride, size_t byteRowStride);
void oidnSetSharedFilterImage(OIDNFilter filter, const char* name,
void* ptr, OIDNFormat format,
size_t width, size_t height,
size_t byteOffset,
size_t bytePixelStride, size_t byteRowStride);It is possible to specify either a data buffer object (buffer
argument) with the oidnSetFilterImage function, or directly a pointer
to shared user-managed data (ptr argument) with the
oidnSetSharedFilterImage function.
In both cases, you must also specify the name of the image parameter to
set (name argument, e.g. "color", "output"), the pixel format
(format argument), the width and height of the image in number of
pixels (width and height arguments), the starting offset of the
image data (byteOffset argument), the pixel stride (bytePixelStride
argument) and the row stride (byteRowStride argument), in number of
bytes. Note that the row stride must be an integer multiple of the pixel
stride.
If the pixels and/or rows are stored contiguously (tightly packed
without any gaps), you can set bytePixelStride and/or byteRowStride
to 0 to let the library compute the actual strides automatically, as a
convenience.
Some special data used by filters are opaque/untyped (e.g. trained model
weights blobs), which can be specified with the
oidnSetSharedFilterData function:
void oidnSetSharedFilterData(OIDNFilter filter, const char* name,
void* ptr, size_t byteSize);Filters may have parameters other than buffers as well, which you can set and get using the following functions:
void oidnSetFilter1b(OIDNFilter filter, const char* name, bool value);
void oidnSetFilter1i(OIDNFilter filter, const char* name, int value);
void oidnSetFilter1f(OIDNFilter filter, const char* name, float value);
bool oidnGetFilter1b(OIDNFilter filter, const char* name);
int oidnGetFilter1i(OIDNFilter filter, const char* name);
float oidnGetFilter1f(OIDNFilter filter, const char* name);Filters support a progress monitor callback mechanism that can be used
to report progress of filter operations and to cancel them as well.
Calling oidnSetFilterProgressMonitorFunction registers a progress
monitor callback function (func argument) with payload (userPtr
argument) for the specified filter (filter argument):
typedef bool (*OIDNProgressMonitorFunction)(void* userPtr, double n);
void oidnSetFilterProgressMonitorFunction(OIDNFilter filter,
OIDNProgressMonitorFunction func,
void* userPtr);Only a single callback function can be registered per filter, and
further invocations overwrite the previously set callback function.
Passing NULL as function pointer disables the registered callback
function. Once registered, Intel Open Image Denoise will invoke the
callback function multiple times during filter operations, by passing
the payload as set at registration time (userPtr argument), and a
double in the range [0, 1] which estimates the progress of the
operation (n argument). When returning true from the callback
function, Intel Open Image Denoise will continue the filter operation
normally. When returning false, the library will cancel the filter
operation with the OIDN_ERROR_CANCELLED error code.
After setting all necessary parameters for the filter, the changes must be commmitted by calling
void oidnCommitFilter(OIDNFilter filter);The parameters can be updated after committing the filter, but it must be re-committed for the changes to take effect.
Finally, an image can be filtered by executing the filter with
void oidnExecuteFilter(OIDNFilter filter);which will read the input image data from the specified buffers and produce the denoised output image.
In the following we describe the different filters that are currently implemented in Intel Open Image Denoise.
The RT (ray tracing) filter is a generic ray tracing denoising
filter which is suitable for denoising images rendered with Monte Carlo
ray tracing methods like unidirectional and bidirectional path tracing.
It supports depth of field and motion blur as well, but it is not
temporally stable. The filter is based on a convolutional neural network
(CNN), and it aims to provide a good balance between denoising
performance and quality. The filter comes with a set of pre-trained CNN
models that work well with a wide range of ray tracing based renderers
and noise levels.
It accepts either a low dynamic range (LDR) or high dynamic range (HDR) color image as input. Optionally, it also accepts auxiliary feature images, e.g. albedo and normal, which improve the denoising quality, preserving more details in the image.
The RT filter has certain limitations regarding the supported input
images. Most notably, it cannot denoise images that were not rendered
with ray tracing. Another important limitation is related to
anti-aliasing filters. Most renderers use a high-quality pixel
reconstruction filter instead of a trivial box filter to minimize
aliasing artifacts (e.g. Gaussian, Blackman-Harris). The RT filter
does support such pixel filters but only if implemented with importance
sampling. Weighted pixel sampling (sometimes called splatting)
introduces correlation between neighboring pixels, which causes the
denoising to fail (the noise will not be filtered), thus it is not
supported.
The filter can be created by passing "RT" to the oidnNewFilter
function as the filter type. The filter supports the parameters listed
in the table below. All specified images must have the same dimensions,
and the output image must be different from the input images
(i.e. in-place denoising is not supported).
| Type | Format | Name | Default | Description |
|---|---|---|---|---|
| Image | float3 | color | input color image (LDR values in [0, 1] or HDR values in [0, +∞), 3 channels) | |
| Image | float3 | albedo | input feature image containing the albedo (values in [0, 1], 3 channels) of the first hit per pixel; optional | |
| Image | float3 | normal | input feature image containing the shading normal (world-space or view-space, arbitrary length, values in (−∞, +∞), 3 channels) of the first hit per pixel; optional, requires setting the albedo image too | |
| Image | float3 | output | output color image (3 channels); must be different from the input images | |
| Data | weights | trained model weights blob; optional | ||
| bool | hdr | false | whether the color is HDR | |
| float | hdrScale | NaN | HDR color values are interpreted such that, multiplied by this scale, a value of 1 corresponds to a luminance level of 100 cd/m² (this affects the quality of the output but the output color values will not be scaled); if set to NaN, the scale is computed automatically (default) | |
| bool | srgb | false | whether the color is encoded with the sRGB (or 2.2 gamma) curve (LDR only) or is linear; the output will be encoded with the same curve | |
| int | maxMemoryMB | 6000 | approximate maximum amount of scratch memory to use in megabytes (actual memory usage may be higher); limiting memory usage may cause slower denoising due to internally splitting the image into overlapping tiles, but cannot cause the denoising to fail | |
| const int | alignment | when manually denoising the image in tiles, the tile size and offsets should be multiples of this amount of pixels to avoid artifacts; note that manual tiled denoising of HDR images is supported only when hdrScale is set by the user | ||
| const int | overlap | when manually denoising the image in tiles, the tiles should overlap by this amount of pixels |
Parameters supported by the RT filter.
Using auxiliary feature images like albedo and normal helps preserving fine details and textures in the image thus can significantly improve denoising quality. These images should typically contain feature values for the first hit (i.e. the surface which is directly visible) per pixel. This works well for most surfaces but does not provide any benefits for reflections and objects visible through transparent surfaces (compared to just using the color as input). However, in certain cases this issue can be fixed by storing feature values for a subsequent hit (i.e. the reflection and/or refraction) instead of the first hit. For example, it usually works well to follow perfect specular (delta) paths and store features for the first diffuse or glossy surface hit instead (e.g. for perfect specular dielectrics and mirrors). This can greatly improve the quality of reflections and transmission. We will describe this approach in more detail in the following subsections.
The auxiliary feature images should be as noise-free as possible. It is not a strict requirement but too much noise in the feature images may cause residual noise in the output. Also, all feature images should use the same pixel reconstruction filter as the color image. Using a properly anti-aliased color image but aliased albedo or normal images will likely introduce artifacts around edges.
The albedo image is the feature image that usually provides the biggest quality improvement. It should contain the approximate color of the surfaces independent of illumination and viewing angle.
For simple matte surfaces this means using the diffuse color/texture as the albedo. For other, more complex surfaces it is not always obvious what is the best way to compute the albedo, but the denoising filter is flexibile to a certain extent and works well with differently computed albedos. Thus it is not necessary to compute the strict, exact albedo values but must be always between 0 and 1.
For metallic surfaces the albedo should be either the reflectivity at normal incidence (e.g. from the artist friendly metallic Fresnel model) or the average reflectivity; or if these are constant (not textured) or unknown, the albedo can be simply 1 as well.
The albedo for dielectric surfaces (e.g. glass) should be either 1 or, if the surface is perfect specular (i.e. has a delta BSDF), the Fresnel blend of the reflected and transmitted albedos (as previously discussed). The latter usually works better but only if it does not introduce too much additional noise due to random sampling. Thus we recommend to split the path into a reflected and a transmitted path at the first hit, and perhaps fall back to an albedo of 1 for subsequent dielectric hits, to avoid noise. The reflected albedo in itself can be used for mirror-like surfaces as well.
The albedo for layered surfaces can be computed as the weighted sum of the albedos of the individual layers. Non-absorbing clear coat layers can be simply ignored (or the albedo of the perfect specular reflection can be used as well) but absorption should be taken into account.
The normal image should contain the shading normals of the surfaces either in world-space or view-space. It is recommended to include normal maps to preserve as much detail as possible.
Just like any other input image, the normal image should be anti-aliased (i.e. by accumulating the normalized normals per pixel). The final accumulated normals do not have to be normalized but must be in a range symmetric about 0 (i.e. normals mapped to [0, 1] are not acceptable and must be remapped to e.g. [−1, 1]).
Similar to the albedo, the normal can be stored for either the first or a subsequent hit (if the first hit has a perfect specular/delta BSDF).
Instead of using the built-in trained models for filtering, it is also possible to specify user-trained models at runtime. This can be achieved by passing the model weights blob produced by the training tool.
The RTLightmap filter is a variant of the RT filter optimized for
denoising HDR lightmaps. It does not support LDR images.
The filter can be created by passing "RTLightmap" to the
oidnNewFilter function as the filter type. The filter supports the
following parameters:
| Type | Format | Name | Default | Description |
|---|---|---|---|---|
| Image | float3 | color | input color image (HDR values in [0, +∞), 3 channels) | |
| Image | float3 | output | output color image (3 channels); must be different from the input images | |
| Data | weights | trained model weights blob; optional | ||
| float | hdrScale | NaN | HDR color values are interpreted such that, multiplied by this scale, a value of 1 corresponds to a luminance level of 100 cd/m²; if set to NaN, the scale is computed automatically (default) | |
| int | maxMemoryMB | 6000 | approximate maximum amount of scratch memory to use in megabytes (actual memory usage may be higher) | |
| const int | alignment | when manually denoising the image in tiles, the tile size and offsets should be multiples of this amount of pixels | ||
| const int | overlap | when manually denoising the image in tiles, the tiles should overlap by this amount of pixels |
Parameters supported by the RTLightmap filter.
A minimal working example demonstrating how to use Intel Open Image
Denoise can be found at apps/denoise/denoise.cpp, which uses the C++11
convenience wrappers of the C99 API.
This example is a simple command-line application that denoises the provided image, which can optionally have auxiliary feature images as well (e.g. albedo and normal). By default the images must be stored in the Portable FloatMap (PFM) format, and the color values must be encoded in little-endian format. To enable other image formats (e.g. OpenEXR, PNG) as well, the project has to be rebuilt with OpenImageIO support enabled.
Running denoise without any arguments will bring up a list of command
line options.
The Intel Open Image Denoise source distribution includes a Python-based
neural network training toolkit (located in the training directory),
which can be used to train the denoising filter models with image
datasets provided by the user. The toolkit consists of the following
command-line scripts:
-
preprocess.py: Preprocesses training and validation datasets. -
train.py: Trains a model using preprocessed datasets. -
infer.py: Performs inference on a dataset using the specified training result. -
export.py: Exports a training result to the runtime model weights format. -
find_lr.py: Tool for finding the optimal minimum and maximum learning rates. -
visualize.py: Invokes TensorBoard for visualizing statistics of a training result. -
split_exr.py: Splits a multi-channel EXR image into multiple feature images. -
convert_image.py: Converts a feature image to a different image format. -
compare_image.py: Compares two feature images using the specified quality metrics.
Before you can run the training toolkit you need the following prerequisites:
-
Python 3.7 or later
-
PyTorch 1.4 or later
-
NumPy 1.17 or later
-
OpenImageIO 2.1 or later
-
TensorBoard 2.1 or later (optional)
The training toolkit has been tested only on Linux, thus other operating systems are currently not supported.
A dataset should consist of a collection of noisy and corresponding noise-free reference images. It is possible to have more than one noisy version of the same image in the dataset, e.g. rendered at different samples per pixel and/or using different seeds.
The training toolkit expects to have all datasets (e.g. training,
validation) in the same parent directory (e.g. data). Each dataset is
stored in its own subdirectory (e.g. train, valid), which can have
an arbitrary name.
The images must be stored in OpenEXR format
(.exr files), and the filenames must have a specific format but the
files can be stored in an arbitrary directory structure inside the
dataset directory. The only restriction is that all versions of an image
(noisy images and the reference image) must be located in the same
subdirectory. Each feature of an image (e.g. color, albedo) must be
stored in a separate image file, i.e. multi-channel EXR image files are
not supported. If you have multi-channel EXRs, you can split them into
separate images per feature using the included split_exr.py tool.
An image filename must consist of a name, the number of samples per
pixel or whether it is the reference (e.g. 0128spp, ref), the
identifier (ID) of the feature (e.g. hdr, alb), and the file
extension (.exr). The exact format as a regular expression is the
following:
.+_([0-9]+(spp)?|ref|reference|gt|target)\.(hdr|ldr|alb|nrm)\.exrThe number of samples per pixel should be padded with leading zeros to have a fixed number of digits. If the reference image is not explicitly named as such (i.e. has the number of samples instead), the image with the most samples per pixel will be considered the reference.
The following image features are supported:
| Feature | ID | Channels |
|---|---|---|
| color (HDR) | hdr |
3 |
| color (LDR) | ldr |
3 |
| albedo | alb |
3 |
| normal | nrm |
3 |
Supported image features, their IDs, and their number of channels.
The following directory tree demonstrates an example root dataset
directory (data) containing one dataset (rt_train) with HDR color
and albedo feature images:
data
`-- rt_train
|-- scene1
| |-- view1_0001.alb.exr
| |-- view1_0001.hdr.exr
| |-- view1_0004.alb.exr
| |-- view1_0004.hdr.exr
| |-- view1_8192.alb.exr
| |-- view1_8192.hdr.exr
| |-- view2_0001.alb.exr
| |-- view2_0001.hdr.exr
| |-- view2_8192.alb.exr
| `-- view2_8192.hdr.exr
|-- scene2_000008spp.alb.exr
|-- scene2_000008spp.hdr.exr
|-- scene2_000064spp.alb.exr
|-- scene2_000064spp.hdr.exr
|-- scene2_reference.alb.exr
`-- scene2_reference.hdr.exr
Training and validation datasets can be used only after preprocessing
them using the preprocess.py script. This will convert the specified
training (-t or --train_data option) and validation datasets (-v
or --valid_data option) located in the root dataset directory (-D or
--data_dir option) to a format that can be loaded more efficiently
during training. All preprocessed datasets will be stored in a root
preprocessed dataset directory (-P or --preproc_dir option).
The preprocessing script requires the set of image features to include
in the preprocessed dataset as command-line arguments. Only these
specified features will be available for training. Preprocessing also
depends on the filter that will be trained (e.g. determines which
HDR/LDR transfer function has to be used), which should be also
specified (-f or --filter option). The alternative is to manually
specify the transfer function (-x or --transfer option) and other
filter-specific parameters, which could be useful for training custom
filters.
For example, to preprocess the training and validation datasets
(rt_train and rt_valid) with HDR color, albedo, and normal image
features, for training the RT filter, the following command can be
used:
./preprocess.py hdr alb nrm --filter RT --train_data rt_train --valid_data rt_valid
For more details about using the preprocessing script, including other options, please have a look at the help message:
./preprocess.py -h
After preprocessing the datasets, it is possible to start training a
model using the train.py script. Similar to the preprocessing script,
the input features must be specified (could be a subset of the
preprocessed features), and the dataset names, directory paths, and the
filter can be also passed.
The tool will produce a training result, the name of which can be
either specified (-r or --result option) or automatically generated
(by default). Each result is stored in its own subdirectory, and these
are located in a common parent directory (-R or --results_dir
option). If a training result already exists, the tool will resume
training that result from the latest checkpoint, or from an earlier
checkpoint at the specified epoch (-c or --checkpoint option).
The default training hyperparameters should work reasonably well in
general, but some adjustments might be necessary for certain datasets to
attain optimal performance, most importantly: the number of epochs (-e
or --epochs option), the mini-batch size (--bs or --batch_size
option), and the learning rate. The training tool uses a cyclical
learning rate (CLR) with the triangular2 scaling policy and an
optional linear ramp-down at the end. The learning rate schedule can be
configured by setting the base learning rate (--lr or
--learning_rate option), the maximum learning rate (--max_lr or
--max_learning_rate option), and the total cycle size in number of
epochs (--lr_cycle_epochs option). If there is an incomplete cycle at
the end, the learning rate will be linearly ramped down to almost zero.
Example usage:
./train.py hdr alb --filter RT --train_data rt_train --valid_data rt_valid --result rt_hdr_alb
For finding the optimal learning rate range we recommend using the
included find_lr.py script, which trains one epoch using an increasing
learning rate and logs the resulting losses in a comma-separated values
(CSV) file. Plotting the loss curve can show when the model starts to
learn (the base learning rate) and when it starts to diverge (the
maximum learning rate).
The model is evaluated with the validation dataset at regular intervals
(--valid_epochs option), and checkpoints are also regularly created
(--save_epochs option) to save training progress. Also, some
statistics are logged (e.g. training and validation losses, learning
rate) at a specified frequency (--log_steps option), which can be
later visualized with TensorBoard by running the visualize.py script,
e.g.:
./visualize.py --result rt_hdr_alb
A training result can be tested by performing inference on an image
dataset (-i or --input_data option) using the infer.py script. The
dataset does not have to be preprocessed. In addition to the result to
use, it is possible to specify which checkpoint to load as well. By
default the latest checkpoint is loaded.
The tool saves the output images in a separate directory (-O or
--output_dir) in the requested formats (-F or --format option). It
also evaluates a set of image quality metrics (-M or --metric
option), e.g. SSIM, MSE, for images that have reference images
available. All metrics are computed in tonemapped non-linear sRGB space.
Thus, HDR images are first tonemapped (with Naughty Dog’s Filmic
Tonemapper from John Hable’s Uncharted 2: HDR Lighting presentation)
and converted to sRGB before evaluating the metrics.
Example usage:
./infer.py --result rt_hdr_alb --input_data rt_test --format exr png --metric ssim
The training result produced by the train.py script cannot be
immediately used by the main library. It has to be first exported to the
runtime model weights format, a Tensor Archive (TZA) file. Running the
export.py script for a training result (and optionally a checkpoint)
will create a binary .tza file in the directory of the result, which
can be either used at runtime through the API or it can be included in
the library build by replacing one of the built-in weights files.
Example usage:
./export.py --result rt_hdr_alb
In addition to the already mentioned split_exr.py script, the toolkit
contains a few other image utilities as well.
convert_image.py converts a feature image to a different image format
(and/or a different feature, e.g. HDR color to LDR), performing
tonemapping and other transforms as well if needed. For HDR images the
exposure can be adjusted by passing a linear exposure scale (-E or
--exposure option). Example usage:
./convert_image.py view1_0004.hdr.exr view1_0004.png --exposure 2.5
The compare_image.py script compares two feature images (preferably
having the dataset filename format to correctly detect the feature)
using the specified image quality metrics, similar to the infer.py
tool. Example usage:
./compare_image.py view1_0004.hdr.exr view1_8192.hdr.exr --exposure 2.5 --metric mse ssim
- For example, if Intel Open Image Denoise is in
~/Projects/oidn, ISPC will also be searched in~/Projects/ispc-v1.12.0-linux