This terraform module provides the means to permanently reserve an IP address available to Google Cloud Platform (GCP) resources, and optionally create forward and reverse entries within Google Cloud DNS. The intent is to provide an address resource which exists independent of the lifecycle of the resources that require the address.
This module is meant for use with Terraform 0.13. If you haven't upgraded and need a Terraform 0.12.x-compatible version of this module, the last released version intended for Terraform 0.12.x is v2.1.1.
Examples are provided in the examples folder, but to simply reserve IP
addresses on a subnetwork without registering them in DNS refer to the
following example:
module "address-fe" {
source = "terraform-google-modules/address/google"
version = "0.1.0"
project_id = "gcp-network"
region = "us-west1"
subnetwork = "projects/gcp-network/regions/us-west1/subnetworks/dev-us-west1-dynamic"
names = [
"gusw1-dev-fooapp-fe-0001-a-001-ip",
"gusw1-dev-fooapp-fe-0001-a-002-ip",
"gusw1-dev-fooapp-fe-0001-a-003-ip"
]
}Then perform the following commands on the root folder:
terraform initto get the pluginsterraform planto see the infrastructure planterraform applyto apply the infrastructure buildterraform destroyto destroy the built infrastructure
An addresses output has been provided as the list of IP addresses that were
reserved by GCP. Because the addresses input variable was not specified, GCP has
reserved the next available IP addresses from the subnetwork provided. The number
of IP addresses reserved is equal to the length of the names input
variable, so size that list accordingly.
If you would prefer to provide the specific IP addresses to be reserved, that can be accomplished with the addresses input variable:
module "address-fe" {
source = "terraform-google-modules/address/google"
version = "0.1.0"
subnetwork = "projects/gcp-network/regions/us-west1/subnetworks/dev-us-west1-dynamic"
names = [
"gusw1-dev-fooapp-fe-0001-a-001-ip",
"gusw1-dev-fooapp-fe-0001-a-002-ip",
"gusw1-dev-fooapp-fe-0001-a-003-ip"
]
addresses = [
"10.11.0.10",
"10.11.0.11",
"10.11.0.12"
]
}Note that the IP addresses must not be reserved and must fall within the range of the provided subnetwork.
External IP addresses can be reserved by setting the global input var to true and omitting the subnetwork:
module "address-fe" {
source = "terraform-google-modules/address/google"
version = "0.1.0"
names = [ "external-facing-ip"]
global = true
}Optionally, the IP addresses you reserve can be registered in Google Cloud
DNS by providing information on the project hosting the Cloud DNS zone, the
managed zone name, the domain registered with Cloud DNS, and setting the
enable_gcp_dns feature flag to true:
module "address-fe" {
source = "terraform-google-modules/address/google"
version = "0.1.0"
subnetwork = "projects/gcp-network/regions/us-west1/subnetworks/dev-us-west1-dynamic"
enable_gcp_dns = true
gcp_dns_project = "gcp-dns"
gcp_dns_domain = "example.com"
gcp_dns_managed_zone = "nonprod-dns-zone"
names = [
"gusw1-dev-fooapp-fe-0001-a-001-ip",
"gusw1-dev-fooapp-fe-0001-a-002-ip",
"gusw1-dev-fooapp-fe-0001-a-003-ip"
]
dns_short_names = [
"gusw1-dev-fooapp-fe-0001-a-001",
"gusw1-dev-fooapp-fe-0001-a-002",
"gusw1-dev-fooapp-fe-0001-a-003"
]
}The module also supports the ability to register reverse DNS entries within
their own zone by setting the enable_gcp_ptr feature flag to true and
specifying the zone with the gcp_dns_reverse_zone input variable:
module "address-fe" {
source = "terraform-google-modules/address/google"
version = "0.1.0"
subnetwork = "projects/gcp-network/regions/us-west1/subnetworks/dev-us-west1-dynamic"
enable_gcp_dns = true
enable_gcp_ptr = true
gcp_dns_project = "gcp-dns"
gcp_dns_domain = "example.com"
gcp_dns_managed_zone = "nonprod-dns-zone"
gcp_dns_reverse_zone = "nonprod-dns-reverse-zone"
names = [
"gusw1-dev-fooapp-fe-0001-a-001-ip",
"gusw1-dev-fooapp-fe-0001-a-002-ip",
"gusw1-dev-fooapp-fe-0001-a-003-ip"
]
dns_short_names = [
"gusw1-dev-fooapp-fe-0001-a-001",
"gusw1-dev-fooapp-fe-0001-a-002",
"gusw1-dev-fooapp-fe-0001-a-003"
]
}As with the non-DNS examples above, the addresses input variable can be
provided with a list of specific IP addresses to be reserved if desired.
Because of the way the module is structured, and due to the fact that Terraform doesn't yet support computed count values, there are certain input variables whose values cannot be computed values. The list of those input variables is as follows:
var.dns_domain
var.dns_short_names
var.enable_cloud_dns
var.enable_reverse_dns
var.global
var.names
You must currently use literal values for these input variables. If you
don't you run the risk of failing validation (at the least) or surfacing the
dreaded value of 'count' cannot be computed error. Future versions of
Terraform may change this fact, but this is the current limitation.
| Name | Description | Type | Default | Required |
|---|---|---|---|---|
| address_type | The type of address to reserve, either "INTERNAL" or "EXTERNAL". If unspecified, defaults to "INTERNAL". | string |
"INTERNAL" |
no |
| addresses | A list of IP addresses to create. GCP will reserve unreserved addresses if given the value "". If multiple names are given the default value is sufficient to have multiple addresses automatically picked for each name. | list(string) |
[ |
no |
| dns_domain | The domain to append to DNS short names when registering in Cloud DNS. | string |
"" |
no |
| dns_managed_zone | The name of the managed zone to create records within. This managed zone must exist in the host project. | string |
"" |
no |
| dns_project | The project where DNS A records will be configured. | string |
"" |
no |
| dns_record_type | The type of records to create in the managed zone. (e.g. "A") | string |
"A" |
no |
| dns_reverse_zone | The name of the managed zone to create PTR records within. This managed zone must exist in the host project. | string |
"" |
no |
| dns_short_names | A list of DNS short names to register within Cloud DNS. Names corresponding to addresses must align by their list index position in the two input variables, names and dns_short_names. If an empty list, no domain names are registered. Multiple names may be registered to the same address by passing a single element list to names and multiple elements to dns_short_names. (e.g. ["gusw1-dev-fooapp-fe-0001-a-001"]) |
list(string) |
[] |
no |
| dns_ttl | The DNS TTL in seconds for records created in Cloud DNS. The default value should be used unless the application demands special handling. | number |
300 |
no |
| enable_cloud_dns | If a value is set, register records in Cloud DNS. | bool |
false |
no |
| enable_reverse_dns | If a value is set, register reverse DNS PTR records in Cloud DNS in the managed zone specified by dns_reverse_zone | bool |
false |
no |
| global | The scope in which the address should live. If set to true, the IP address will be globally scoped. Defaults to false, i.e. regionally scoped. When set to true, do not provide a subnetwork. | bool |
false |
no |
| ip_version | The IP Version that will be used by this address. | string |
"IPV4" |
no |
| names | A list of IP address resource names to create. This is the GCP resource name and not the associated hostname of the IP address. Existing resource names may be found with gcloud compute addresses list (e.g. ["gusw1-dev-fooapp-fe-0001-a-001-ip"]) |
list(string) |
[] |
no |
| network_tier | The networking tier used for configuring this address. | string |
"PREMIUM" |
no |
| prefix_length | The prefix length of the IP range. | number |
16 |
no |
| project_id | The project ID to create the address in | string |
n/a | yes |
| purpose | The purpose of the resource(GCE_ENDPOINT, SHARED_LOADBALANCER_VIP, VPC_PEERING). | string |
"GCE_ENDPOINT" |
no |
| region | The region to create the address in | string |
n/a | yes |
| subnetwork | The subnet containing the address. For EXTERNAL addresses use the empty string, "". (e.g. "projects//regions//subnetworks/") | string |
"" |
no |
| Name | Description |
|---|---|
| addresses | List of address values managed by this module (e.g. ["1.2.3.4"]) |
| dns_fqdns | List of DNS fully qualified domain names registered in Cloud DNS. (e.g. ["gusw1-dev-fooapp-fe-0001-a-001.example.com", "gusw1-dev-fooapp-fe-0001-a-0002.example.com"]) |
| names | List of address resource names managed by this module (e.g. ["gusw1-dev-fooapp-fe-0001-a-0001-ip"]) |
| reverse_dns_fqdns | List of reverse DNS PTR records registered in Cloud DNS. (e.g. ["1.2.11.10.in-addr.arpa", "2.2.11.10.in-addr.arpa"]) |
| self_links | List of URIs of the created address resources |
- Terraform >= 0.13.0
- terraform-provider-google plugin v1.12.0
In order to execute this module you must have a Service Account with the following roles:
- roles/dns.admin on the project (for DNS registration)
- roles/compute.networkAdmin on the organization (or the host project that defines the network)
A helper script is included to automatically grant all the
required roles at the project level. The roles/compute.networkAdmin can
either be assigned at the project level on the project hosting the network
and subnetworks where IP addresses will be reserved, or at the organization
level. The setup-sa.sh script will assign it at the project level on the
host project that is passed in. If this is not what you need then you will
need to adjust permissions accordingly.
Run the script as follows:
./helpers/setup-sa.sh <HOST_PROJECT_NAME> <SERVICE_ACCOUNT_NAME>
The SERVICE_ACCOUNT_NAME can be whatever you want the service account to be
named. Successful completion of the setup-sa.sh script will result in a
credentials file called credentials.json that can be used with
gcloud or referenced by the module tests.
In order to operate with the Service Account you must activate the following API on the project where the Service Account was created:
- Compute Engine API - compute.googleapis.com
- Google Cloud DNS API - dns.googleapis.com
NOTE: These APIs are enabled by default on the host project passed in to the ./helpers/setup-sa.sh helper script.
Be sure you have the correct Terraform version (0.12.x), you can choose the binary here:
The project has the following folders and files:
- /: root folder
- /examples: examples for using this module
- /test: Folders with files for testing the module (see Testing section on this file)
- /main.tf: main file for this module, contains all the resources to create
- /variables.tf: all the variables for the module
- /output.tf: the outputs of the module
- /README.md: this file