Skip to content

giacomo/node-red-contrib-eq3-bluetooth-v2

Repository files navigation

node-red-contrib-eq3-bluetooth-v2

To run execute: node index.js

eQ-3-radiator-thermostat

Full-featured shell script interface based on expect and gatttool for eqiva eQ-3 radiator thermostat

This script allows to control the bluetooth radiator thermostat with the Raspberry Pi's Raspian and other Linux distributions.

$ ./eq3.exp 00:1A:22:07:FD:03 

Full-featured CLI for radiator thermostat eQ-3 CC-RT-BLE

Usage: <mac> <command> <parameters...>

Sync:
 sync                                           - Syncs time and prints target temperature and mode

Mode:
 auto                                           - Sets auto mode and deactivates vacation mode if active.
 manual                                         - Sets manual mode and deactivates vacation mode if active.

Temperature:
 comfort                                        - Sets target temperature to programmed comfort temperature
 eco                                            - Sets target temperature to programmed eco temperature
 boost                                          - Activates boost mode for 5 minutes
 boost off                                      - Deactivates boost mode
 temp <temp>                                    - Sets target temperature to given value
                                                  temp: 5.0 to 29.5 in intervals of 0.5°C, e.g. 19.5
 on                                             - Sets thermostat to permanent on (30°C)
 off                                            - Sets thermostat to permanent off (4.5°C)

Timers:
 timers                                         - Reads all timers and prints them human friendly
 timer-settings                                 - Reads all timers and prints them ready for re-configuration
 timer <day>                                    - Reads timer for given day
 timer <day> <base> <hh:mm> <temp> <hh:mm> ...  - Sets timer for given day and up to 7 events with temperature and time
                                                  day:  mon, tue, wed, thu, fri, sat, sun, work, weekend, everyday, today, tomorrow
                                                  base temperature before first and after last schedule: 5.0 to 29.5 in intervals of 0.5°C, e.g. 19.5 
                                                  target temperature 5.0 to 29.5 in intervals of 0.5°C, e.g. 19.5 
                                                  hh:mm: time where minutes must be in intervals of 10 minutes, e.g. 23:40
 vacation <yy-mm-dd> <hh:mm> <temp>             - Activates vacation mode until date and time and temperature in °C
                                                  yy-mm-dd: until date, e.g. 17-03-31
                                                  hh:mm: until time where minutes must be 00 or 30, e.g. 23:30
                                                  temp: 5.0 to 29.5 in intervals of 0.5°C, e.g. 19.5 
 vacation <hh> <temp>                           - Activates vacation mode for given period in hours and temperature in °C
                                                  hh: Period in hours
                                                  temp: 5.0 to 29.5 in intervals of 0.5°C, e.g. 19.5

Configuration:
 comforteco <temp_comfort> <temp_eco>           - Sets comfort and eco temperature in °C
                                                  temp: 5.0 to 29.5 in intervals of 0.5°C, e.g. 19.5
 window <temp> <hh:mm>                          - Sets temperature in °C and period for open window mode
                                                  temp: 5.0 to 29.5 in intervals of 0.5°C, e.g. 19.5 
                                                  hh:mm: time where minutes in intervals of 5 minutes, e.g. 02:05
 offset <offset>                                - Sets the offset temperature in °C
                                                  offset: temperature between -3.5 and 3.5 in intervals of 0.5°C, e.g. 1.5

Others:
 lock                                           - Locks thermostat (LOC). No PIN required!
 unlock                                         - Unlocks thermostat. No PIN required!
 serial                                         - Prints serial of thermostat (see little badge where batteries are) and PIN that is required to pair device in official app
 status                                         - Syncs time, Prints target temperature, mode and timers
                                                  (in debug mode also last command even of official app, set log_user to 1 in code!)
 json                                           - Simular to status but in json format
 clear                                          - Clear buffer of last request (will be printed in debug mode, set log_user to 1 in code!)
 reset                                          - Factory reset

Initial setup

  1. Check pre-conditions

Install expect:

$ sudo apt install expect

Check if gatttool is available:

$ gatttool
Usage:
  gatttool [OPTION...]
...

  1. Discover the MAC address of your thermostat
$ sudo hcitool lescan
LE Scan ...
38:01:95:84:A8:B1 (unknown)
00:1A:22:0A:91:CF (unknown)
00:1A:22:0A:91:CF CC-RT-BLE

It is the one related to the device CC-RT-BLE.

  1. Pair bluetooth

Actually I am not 100% sure, but it seems that the thermostat must be explicitly paired (maybe only newer versions). Therefore you have to press the button on the termostat and start the pairing procedure. It depends on your linux distribution how devices must be paired there. The pin seems not to be required for pairing.

Examples

Sync time from PC to thermostat

$ ./eq3.exp 00:1A:22:07:FD:03 sync

Temperature:			10.5°C
Valve:				0%
Mode:				manual 
Vacation mode:			off

Dump status

$ ./eq3.exp 00:1A:22:07:FD:03 status


Temperature:			10.5°C
Valve:				0%
Mode:				manual 
Vacation mode:			off


Timer for Sun:
	Sun, 00:00 - 07:30:	17.0°C
	Sun, 07:30 - 10:00:	21.0°C
	Sun, 10:00 - 14:30:	19.0°C
	Sun, 14:30 - 21:20:	21.0°C
	Sun, 21:20 - 24:00:	17.0°C

Timer for Mon:
	Mon, 00:00 - 17:00:	17.0°C
	Mon, 17:00 - 21:00:	21.0°C
	Mon, 21:00 - 24:00:	17.0°C

Timer for Tue:
	Tue, 00:00 - 17:00:	17.0°C
	Tue, 17:00 - 21:00:	21.0°C
	Tue, 21:00 - 24:00:	17.0°C

Timer for Wed:
	Wed, 00:00 - 17:00:	17.0°C
	Wed, 17:00 - 21:00:	21.0°C
	Wed, 21:00 - 24:00:	17.0°C

Timer for Thu:
	Thu, 00:00 - 17:00:	17.0°C
	Thu, 17:00 - 21:00:	21.0°C
	Thu, 21:00 - 24:00:	17.0°C

Timer for Fri:
	Fri, 00:00 - 17:00:	17.0°C
	Fri, 17:00 - 22:00:	21.0°C
	Fri, 22:00 - 24:00:	19.0°C

Timer for Sat:
	Sat, 00:00 - 07:30:	17.0°C
	Sat, 07:30 - 10:00:	21.0°C
	Sat, 10:00 - 14:30:	19.0°C
	Sat, 14:30 - 22:00:	21.0°C
	Sat, 22:00 - 24:00:	19.0°C

Device mac:			00:1A:22:07:FD:03
Device name:			CC-RT-BLE
Device vendor:			eq-3

Program window open mode

$ ./eq3.exp 00:1A:22:07:FD:03 window 16.5 2:00

Window open temperature:    16.5°C
Window open time:           2:00

Temperature:                22.0°C
Valve:                      0%
Mode:                       auto 
Vacation mode:              off

Set to auto and manual mode

$ ./eq3.exp 00:1A:22:07:FD:03 auto

Temperature:            21.0°C
Valve:                  0%
Mode:                   auto
Vacation mode:          off

$ ./eq3.exp 00:1A:22:07:FD:03 manual

Temperature:            21.0°C
Valve:                  0%
Mode:                   manual
Vacation mode:          off

Program comfort and eco temperature and switch to programmed temperatures

$ ./eq3.exp 00:1A:22:07:FD:03 comforteco 22.0 17.0

Comfort temperature:    22.0°C
Eco temperature:        17.0°C

Temperature:            22.5°C
Valve:                  0%
Mode:                   manual
Vacation mode:          off

$ ./eq3.exp 00:1A:22:07:FD:03 comfort

Temperature:            22.0°C
Valve:                  0%
Mode:                   manual
Vacation mode:          off

$ ./eq3.exp 00:1A:22:07:FD:03 eco

Temperature:            17.0°C
Valve:                  15%
Mode:                   manual
Vacation mode:          off

Set current temperature

$ ./eq3.exp 00:1A:22:07:FD:03 temp 22.5

Temperature:            22.5°C
Valve:                  15%
Mode:                   manual
Vacation mode:          off

Start and stop boost mode

$ ./eq3.exp 00:1A:22:07:FD:03 boost

Temperature:            22.5°C
Valve:                  80%
Mode:                   manual boost
Vacation mode:          off

$ ./eq3.exp 00:1A:22:07:FD:03 boost off

Temperature:            22.5°C
Valve:                  15%
Mode:                   manual
Vacation mode:          off

Start vacation mode

$ ./eq3.exp 00:1A:22:07:FD:03 vacation 17-03-31 21:30 14.5

Vacation mode:          17-03-31 21:30 14.5°C

Temperature:            14.5°C
Valve:                  0%
Mode:                   auto vacation 
Vacation mode:          on
Vacation until:         2017-03-31 21:30

$ ./eq3.exp 00:1A:22:07:FD:03 vacation 120 19

Vacation mode:          17-02-14 21:30 19°C

Temperature:            19.0°C
Valve:                  0%
Mode:                   auto vacation 
Vacation mode:          on
Vacation until:         2017-02-14 21:30

Set timer for Wednesday with 7 events and read it

$ ./eq3.exp 00:1A:22:07:FD:03 timer wed 19 03:00 23 06:00 19 09:00 23 12:00 19 15:00 23 18:00 24 24:00

Timer set: wed 19 03:00 23 06:00 19 09:00 23 12:00 19 15:00 23 18:00 24 24:00

$ ./eq3.exp 00:1A:22:07:FD:03 timer wed

Timer for Wed (0x0411 2004):    21 04 26 12 2e 24 26 36 2e 48 26 5a 2e 6c 30 90 
    Wed, 00:00 - 03:00: 19.0°C
    Wed, 03:00 - 06:00: 23.0°C
    Wed, 06:00 - 09:00: 19.0°C
    Wed, 09:00 - 12:00: 23.0°C
    Wed, 12:00 - 15:00: 19.0°C
    Wed, 15:00 - 18:00: 23.0°C
    Wed, 18:00 - 24:00: 24.0°C

Set offset temperature

$ ./eq3.exp 00:1A:22:07:FD:03 offset 1.0

Offset temperature:     1.0°C

Temperature:            22.0°C
Valve:                  0%
Mode:                   auto 
Vacation mode:          off

Lock and unlock radiator thermostat

$ ./eq3.exp 00:1A:22:07:FD:03 lock

Temperature:            22.5°C
Valve:                  42%
Mode:                   manual locked
Vacation mode:          off

$ ./eq3.exp 00:1A:22:07:FD:03 unlock

Temperature:            22.5°C
Valve:                  42%
Mode:                   manual
Vacation mode:          off

About

eq3 CC-RT-BLE-EQ-Bridge, remote control raspberry pi, linux

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published