esp32_RF : How to control RF 433Hz Outlet switches with Harmony Hub

1 - Create HTTP URLs -> RF bridge with ESP32

ESP32 create a webserver with 2 URLs per plug to control:

• http://<ip_address>/on1 to turn on plug #1
• http://<ip_address>/off1 to turn of plug #1

It can be extended to control more plug Leds are only used to display power status (RED : Off, GREEN : On, BLUE : Listening, YELLOW : Setting up)

RF433 Library:

• https://github.com/sui77/rc-switch for library
• http://randomnerdtutorials.com/rf-433mhz-transmitter-receiver-module-with-arduino/
• http://www.instructables.com/id/Using-an-ESP8266-to-Control-Mains-Sockets-Using-43/

Docs for Outlets

• https://github.com/sui77/rc-switch/wiki/HowTo_OperateLowCostOutlets
• https://arduinodiy.wordpress.com/tag/433-mhz/

Docs to 433MHz :

• http://randomnerdtutorials.com/decode-and-send-433-mhz-rf-signals-with-arduino/

Test with browser and check Leds :

2 - Configure HA_Bridge to send HTTP request from Harmony by emulating HUE hub

Configure the calls to the HTTP URLs

Test with HA_Bridge

3 - Add device with Harmony mobile application application

Use Harmony mobile application to add hue devices to your hub

• https://support.myharmony.com/en-us/harmony-experience-with-philips-hue