This binding connects to WiFi IntesisBox devices, speaking an ASCII protocol. It does not support IntesisHome devices. This binding has only been tested against a FJ-RC-WMP-1 IntesisBox.
This binding only supports one thing type:
| Thing | Thing Type | Description |
|---|---|---|
| intesisbox | Thing | Represents a single thermostat |
Discovery is done via a proprietary UDP broadcast. Discovered things will be added to the inbox and configured by MAC address. You can also configure a static IP on the individual thing, or manually add a thing via IP address.
You can manually configure an intesisbox thing. If you provide only a MAC Address, it will go through the discovery process to determine its current IP before connecting. Alternately, you can provide an IP Address for direct connection without discovery.
| Channel ID | Item Type | Description | Possible Values |
|---|---|---|---|
| onoff | Switch | Turns power on/off for your climate system. | ON, OFF |
| mode | String | The heating/cooling mode. | AUTO, HEAT, COOL, DRY, FAN |
| setptemp | Number:Temperature | The currently set target temperature. | |
| ambtemp | Number:Temperature | (Readonly) The ambient air temperature. | |
| fansp | String | Fan speed (if applicable) | AUTO, 1-9 |
| vaneud | String | Control of up/down vanes (if applicable) | AUTO, 1-9, SWING, PULSE |
| vanelr | String | Control of left/right vanes (if applicable) | AUTO, 1-9, SWING, PULSE |
| errstatus | String | (Readonly) A description of an error coming from your climate system. | |
| errcode | Number | (Readonly) An error code coming from your climate system. |
Note that individual A/C units may not support all channels, or all possible values for those channels. For example, not all A/C units have controllable vanes. Or fan speed may be limited to 1-4, instead of all of 1-9. The set point temperature is also limited to a device specific range. For set point temperature, sending an invalid value will cause it to choose the minimum/maximum allowable value as appropriate. The device will also round it to whatever step size it supports. For all other channels, invalid values are ignored.
Group gLoftThermostat "Loft Minisplit" [ "Thermostat" ]
Switch LoftMinisplit_Switch "Power" { channel="intesisbox:intesisbox:001dc9835e29:onoff" }
String LoftMinisplit_Mode "Mode" { channel="intesisbox:intesisbox:001dc9835e29:mode" }
Number:Temperature LoftMinisplit_SetPoint "Set Point" (gLoftThermostat) [ "TargetTemperature" ] { channel="intesisbox:intesisbox:001dc9835e29:setptemp" }
Number:Temperature LoftMinisplit_AmbTemp "Ambient Temperature" (gLoftThermostat) [ "CurrentTemperature" ] { channel="intesisbox:intesisbox:001dc9835e29:ambtemp" }