Skip to content

cvut/qtrvsim

BranchesTags

Repository files navigation

QtRvSim–RISC-V CPU simulator for education

QtRvSim screenshot

Developed by the Computer Architectures Education project at Czech Technical University.

Are you using QtRvSim at your organization? Please, let us know in the discussion!

Table of contents

Try it out! (WebAssembly)

QtRVSim is experimentally available for WebAssembly and it can be run in most browsers without installation. QtRVSim online

Note, that WebAssembly version is experimental. Please, report any difficulties via GitHub issues.

Build and packages

Packaging status

build result

Build Dependencies

  • Qt 5 (minimal tested version is 5.9.5), experimental support of Qt 6
  • elfutils (optional; libelf works too but there can be some problems)

Quick Compilation on Linux

On Linux, you can use a wrapper Makefile and run make in the project root directory. It will create a build directory and run CMake in it. Available targets are: release (default) and debug.

Note for packagers: This Makefile is deleted by CMake when source archive is created to avoid any ambiguity. Packages should invoke CMake directly.

General Compilation

cmake -DCMAKE_BUILD_TYPE=Release /path/to/qtrvsim
make

Where /path/to/qtrvsim is path to this project root. The built binaries are to be found in the directory targetin the build directory (the one, where cmake was called).

-DCMAKE_BUILD_TYPE=Debug builds development version including sanitizers.

If no build type is supplied, Debug is the default.

Building from source on macOS

Install the latest version of Xcode from the App Store. Then open a terminal and execute xcode-select --install to install Command Line Tools. Then open Xcode, accept the license agreement and wait for it to install any additional components. After you finally see the "Welcome to Xcode" screen, from the top bar choose Xcode -> Preferences -> Locations -> Command Line Tools and select an SDK version.

Install Homebrew and use it to install Qt. (macOS builds must use the bundled libelf)

brew install qt

Now build the project the same way as in general compilation (above).

Download Binary Packages

sudo add-apt-repository ppa:qtrvsimteam/ppa
sudo apt-get update
sudo apt-get install qtrvsim

Nix package

QtRVSim provides a Nix package as a part of the repository. You can build and install it by a command bellow. Updates have to be done manually by checking out the git. NIXPKGS package is in PR phase.

nix-env -if .

Tests

Tests are managed by CTest (part of CMake). To build and run all tests, use this commands:

cmake -DCMAKE_BUILD_TYPE=Release /path/to/QtRVSim
make
ctest

Documentation

Main documentation is provided in this README and in subdirectories docs/user and docs/developer.

The project was developed and extended as theses of Karel Kočí, Jakub Dupak and Max Hollmann. See section Resources and Publications for links and references.

Accepted Binary Formats

The simulator accepts ELF statically linked executables compiled for RISC-V target (--march=rv64g). The simulator will automatically select endianness based on the ELF file header. Simulation will execute as XLEN=32 or XLEN=32 according to the ELF file header.

  • 64-bit RISC-V ISA RV64IM and 32-bit RV32IM ELF executables are supported.
  • Compressed instructions are not yet supported.

You can use compile the code for simulation using specialized RISC-V GCC/Binutils toolchain (riscv32-elf) or using unified Clang/LLVM toolchain with LLD. If you have Clang installed, you don't need any additional tools. Clang can be used on Linux, Windows, macOS and others...

LLVM toolchain usage

clang --target=riscv32 -march=rv32g -nostdlib -static -fuse-ld=lld test.S -o test
llvm-objdump -S test

GNU toolchain usage

riscv32-elf-as test.S -o test.o
riscv32-elf-ld test.o -o test
riscv32-elf-objdump -S test

or

riscv32-elf-gcc test.S -o test
riscv32-elf-objdump -S test

GNU 64-bit toolchain use for RV32I target

Multilib supporting 64-bit embedded toolchain can be used for to build executable

riscv64-unknown-elf-gcc -march=rv32i -mabi=ilp32 -nostdlib -o test test.c crt0local.S -lgcc

The global pointer and stack has to be set to setup runtime C code conformant environment. When no other C library is used then next simple crt0local.S can be used.

example code 
/* minimal replacement of crt0.o which is else provided by C library */

.globl main
.globl _start
.globl __start

.option norelax

.text

__start:
_start:
        .option push
        .option norelax
        la gp, __global_pointer$
        .option pop
        la      sp, __stack_end
        addi    a0, zero, 0
        addi    a1, zero, 0
        jal     main
quit:
        addi    a0, zero, 0
        addi    a7, zero, 93  /* SYS_exit */
        ecall

loop:   ebreak
        beq     zero, zero, loop

.bss

__stack_start:
        .skip   4096
__stack_end:

.end _start

Integrated Assembler

Basic integrated assembler is included in the simulator. Small subset of GNU assembler directives is recognized as well. Next directives are recognized: .word, .orig, .set /.equ, .ascii and .asciz. Some other directives are simply ignored: .data, .text, .globl, .end and .ent. This allows to write code which can be compiled by both - integrated and full-featured assembler. Addresses are assigned to labels/symbols which are stored in symbol table. Addition, subtraction, multiplication, divide and bitwise and or are recognized.

Support to call external make utility

The action "Build executable by external make" call "make" program. If the action is invoked, and some source editors selected in main windows tabs then the "make" is started in the corresponding directory. Else directory of last selected editor is chosen. If no editor is open then directory of last loaded ELF executable are used as "make" start path. If even that is not an option then default directory when the emulator has been started is used.

Advanced functionalities

Peripherals

Emuated LCD, knobs, buttons, serial port, timer...

The simulator implements emulation of two peripherals for now.

The first is simple serial port (UART). It support transmission (Tx) and reception (Rx). Receiver status register (SERP_RX_ST_REG) implements two bits. Read-only bit 0 (SERP_RX_ST_REG_READY) is set to one if there is unread character available in the receiver data register (SERP_RX_DATA_REG). The bit 1 (SERP_RX_ST_REG_IE) can be written to 1 to enable interrupt request when unread character is available. The transmitter status register (SERP_TX_ST_REG) bit 0 (SERP_TX_ST_REG_READY) signals by value 1 that UART is ready and can accept next character to be sent. The bit 1 (SERP_TX_ST_REG_IE) enables generation of interrupt. The register SERP_TX_DATA_REG is actual Tx buffer. The LSB byte of written word is transmitted to the terminal window. Definition of peripheral base address and registers offsets (_o) and individual fields masks (_m) follows

#define SERIAL_PORT_BASE   0xffffc000

#define SERP_RX_ST_REG_o           0x00
#define SERP_RX_ST_REG_READY_m      0x1
#define SERP_RX_ST_REG_IE_m         0x2

#define SERP_RX_DATA_REG_o         0x04

#define SERP_TX_ST_REG_o           0x08
#define SERP_TX_ST_REG_READY_m      0x1
#define SERP_TX_ST_REG_IE_m         0x2

#define SERP_TX_DATA_REG_o         0x0c

The UART registers region is mirrored on the address 0xffff0000 to enable use of programs initially written for SPIM or MARS emulators.

The another peripheral allows to set three byte values concatenated to single word (read-only KNOBS_8BIT register) from user panel set by knobs and display one word in hexadecimal, decimal and binary format (LED_LINE register). There are two other words writable which control color of RGB LED 1 and 2 (registers LED_RGB1 and LED_RGB2).

#define SPILED_REG_BASE    0xffffc100

#define SPILED_REG_LED_LINE_o           0x004
#define SPILED_REG_LED_RGB1_o           0x010
#define SPILED_REG_LED_RGB2_o           0x014
#define SPILED_REG_LED_KBDWR_DIRECT_o   0x018

#define SPILED_REG_KBDRD_KNOBS_DIRECT_o 0x020
#define SPILED_REG_KNOBS_8BIT_o         0x024

The simple 16-bit per pixel (RGB565) framebuffer and LCD are implemented. The framebuffer is mapped into range starting at LCD_FB_START address. The display size is 480 x 320 pixel. Pixel format RGB565 expect red component in bits 11.. 15, green component in bits 5..10 and blue component in bits 0..4.

#define LCD_FB_START       0xffe00000
#define LCD_FB_END         0xffe4afff

The basic implementation of RISC-V Advanced Core Local Interruptor is implemented with basic support for

  • Machine-level Timer Device (MTIMER)
  • Machine-level Software Interrupt Device (MSWI)
#define ACLINT_MSWI        0xfffd0000 // core 0 machine SW interrupt request
#define ACLINT_MTIMECMP    0xfffd4000 // core 0 compare value
#define ACLINT_MTIME       0xfffdbff8 // timer base 10 MHz
#define ACLINT_SSWI        0xfffd0000 // core 0 system SW interrupt request

More information about ACLINT can be found in RISC-V Advanced Core Local Interruptor Specification.

Interrupts and Control and Status Registers

Implemented CSR registers and their usage

List of interrupt sources:

Irq number mie / mip Bit Source
3 3 Machine software interrupt request
7 7 Machine timer interrupt
16 16 There is received character ready to be read
17 17 Serial port ready to accept character to Tx

Following Control Status registers are recognized

Number Name Description
0x300 mstatus Machine status register.
0x304 mie Machine interrupt-enable register.
0x305 mtvec Machine trap-handler base address.
0x340 mscratch Scratch register for machine trap handlers.
0x341 mepc Machine exception program counter.
0x342 mcause Machine trap cause.
0x343 mtval Machine bad address or instruction.
0x344 mip Machine interrupt pending.
0x34A mtinsr Machine trap instruction (transformed).
0x34B mtval2 Machine bad guest physical address.
0xB00 mcycle Machine cycle counter.
0xB02 minstret Machine instructions-retired counter.
0xF11 mvendorid Vendor ID.
0xF12 marchid Architecture ID.
0xF13 mimpid Implementation ID.
0xF14 mhardid Hardware thread ID.

csrr, csrw, csrrs , csrrs and csrrw are used to copy and exchange value from/to RISC-V control status registers.

Sequence to enable serial port receive interrupt:

Decide location of interrupt service routine the first. The address of the common trap handler is defined by mtvec register and then PC is set to this address when exception or interrupt is accepted.

Enable bit 16 in the machine Interrupt-Enable register (mie). Ensure that bit 3 (mstatus.mie - machine global interrupt-enable) of Machine Status register is set to one.

Enable interrupt in the receiver status register (bit 1 of SERP_RX_ST_REG).

Write character to the terminal. It should be immediately consumed by the serial port receiver if interrupt is enabled in SERP_RX_ST_REG. CPU should report interrupt exception and when it propagates to the execution phase PC is set to the interrupt routine start address.

System Calls Support

Syscall table and documentation

The emulator includes support for a few Linux kernel system calls. The RV32G ilp32 ABI is used.

Register use on input use on output Calling Convention
zero (x0) — - Hard-wired zero
ra (x1) — (preserved) Return address
sp (x2) — (callee saved) Stack pointer
gp (x3) — (preserved) Global pointer
tp (x4) — (preserved) Thread pointer
t0 .. t2 (x5 .. x7) — - Temporaries
s0/fp (x8) — (callee saved) Saved register/frame pointer
s1 (x9) — (callee saved) Saved register
a0 (x10) 1st syscall argument return value Function argument/return value
a1 (x11) 2nd syscall argument - Function argument/return value
a2 .. a5 (x12 .. x15) syscall arguments - Function arguments
a6 (x16) - - Function arguments
a7 (x17) syscall number - Function arguments
s2 .. s11 (x18 .. x27) — (callee saved) Saved registers
t3 .. t6 (x28 .. x31) — - Temporaries

The all system call input arguments are passed in register.

Supported syscalls:

void exit(int status) __NR_exit (93)

Stop/end execution of the program. The argument is exit status code, zero means OK, other values informs about error.

ssize_t read(int fd, void *buf, size_t count) __NR_read (63)

Read count bytes from open file descriptor fd. The emulator maps file descriptors 0, 1 and 2 to the internal terminal/console emulator. They can be used without open call. If there are no more characters to read from the console, newline is appended. At most the count bytes read are stored to the memory location specified by buf argument. Actual number of read bytes is returned.

ssize_t write(int fd, const void *buf, size_t count) __NR_write (64)

Write count bytes from memory location buf to the open file descriptor fd. The same about console for file handles 0, 1 and 2 is valid as for read.

int close(int fd) __NR_close (57)

Close file associated to descriptor fd and release descriptor.

int openat(int dirfd, const char *pathname, int flags, mode_t mode) __NR_openat (56)

Open file and associate it with the first unused file descriptor number and return that number. If the option OS Emulation->Filesystem root is not empty then the file path pathname received from emulated environment is appended to the path specified by Filesystem root. The host filesystem is protected against attempt to traverse to random directory by use of .. path elements. If the root is not specified then all open files are targetted to the emulated terminal. Only TARGET_AT_FDCWD (dirfd = -100) mode is supported.

void * brk(void *addr) __NR_brk (214)

Set end of the area used by standard heap after end of the program data/bss. The syscall is emulated by dummy implementation. Whole address space up to 0xffff0000 is backuped by automatically attached RAM.

int ftruncate(int fd, off_t length) __NR_truncate (46)

Set length of the open file specified by fd to the new length. The length argument is 64-bit even on 32-bit system and it is passed as the lower part and the higher part in the second and third argument.

ssize_t readv(int fd, const struct iovec *iov, int iovcnt) __NR_Linux (65)

The variant of read system call where data to read are would be stored to locations specified by iovcnt pairs of base address, length pairs stored in memory at address pass in iov.

ssize_t writev(int fd, const struct iovec *iov, int iovcnt) __NR_Linux (66)

The variant of write system call where data to write are defined by iovcnt pairs of base address, length pairs stored in memory at address pass in iov.

Limitations of the Implementation

  • See list of currently supported instructions.

QtRvSim limitations

  • Only very minimal support for privileged instruction is implemented for now (mret).
  • Only machine mode and minimal subset of machine CSRs is implemented.
  • TLB and virtual memory are not implemented.
  • No floating point support
  • Memory access stall (stalling execution because of cache miss would be pretty annoying for users so difference between cache and memory is just in collected statistics)
  • Only limited support for interrupts and exceptions. When ecall instruction is recognized, small subset of the Linux kernel system calls can be emulated or simulator can be configured to continue by trap handler on mtvec address.

List of Currently Supported Instructions

  • RV32I:
    • LOAD: lw, lh, lb, lwu, lhu, lbu
    • STORE: sw, sh, sb, swu, shu, sbu
    • OP: add, sub, sll, slt, sltu, xor, srl, sra, or, and
    • MISC-MEM: fence, fence.i
    • OP-IMM: addi, sll, slti, sltiu, xori, srli, srai, ori, andi, auipc, lui
    • BRANCH: beq, bne, btl, bge, bltu, bgtu
    • JUMP: jal, jalr
    • SYSTEM: ecall, mret, ebreak, csrrw, csrrs, csrrc, csrrwi, csrrsi, csrrci
  • RV64I:
    • LOAD/STORE: lwu, ld, sd
    • OP-32: addw, subw, sllw, srlw, sraw, or, and
    • OP-IMM-32: addiw, sllw, srliw, sraiw
  • Pseudoinstructions
    • BASIC: nop
    • LOAD: la, li,
    • OP: mv, not, neg, negw, sext.b, sext.h, sext.w, zext.b, zext.h, zext.w, seqz, snez, sltz, slgz
    • BRANCH: beqz, bnez, blez, bgez, bltz, bgtz, bgt, ble, bgtu, bleu
    • JUMP: j, jal, jr, jalr, ret, call, tail
  • Extensions
    • RV32M/RV64M: mul, mulh, mulhsu, div, divu, rem, remu
    • RV64M: mulw, divw, divuw, remw, remuw
    • RV32A/RV64A: lr.w, sc.w, amoswap.w, amoadd.w, amoxor.w, amoand.w, amoor.w, amomin.w, amomax.w, amominu.w, amomaxu.w
    • RV64A: lr.d, sc.d, amoswap.d, amoadd.d, amoxor.d, amoand.d, amoor.d, amomin.d, amomax.d, amominu.d, amomaxu.d
    • Zicsr: csrrw, csrrs, csrrc, csrrwi, csrrsi, csrrci

For details about RISC-V, refer to the ISA specification: https://riscv.org/technical/specifications/.

Links to Resources and Similar Projects

Resources and Publications

Please reference above article, if you use QtRvSim in education or research related materials and publications.

Projects

Copyright

License

This project is licensed under GPL-3.0-or-later. The full text of the license is in the LICENSE file. The license applies to all files except for directories named external and files in them. Files in external directories have a separate license compatible with the projects license.

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.

Faculty of Electrical Engineering Faculty of Information Technology Czech Technical University

About

RISC-V CPU simulator for education purposes

Topics

teaching computer-architecture risc-v cpu-emulator

Resources

Readme

License

GPL-3.0 license
Activity
Custom properties

Stars

501 stars

Watchers

16 watching

Forks

68 forks
Report repository

Releases 9

QtRvSim version 0.9.8 release Latest
Oct 3, 2024
+ 8 releases

Contributors 26

+ 12 contributors

Languages