Merge pull request #94 from nhooyr/removeReadLoop

Remove readLoop

README.md

@@ -123,24 +123,17 @@ it has to reinvent hooks for TLS and proxies and prevents support of HTTP/2.
 Some more advantages of nhooyr/websocket are that it supports concurrent writes and
 makes it very easy to close the connection with a status code and reason.
 
-nhooyr/websocket also responds to pings, pongs and close frames in a separate goroutine so that
-your application doesn't always need to read from the connection unless it expects a data message.
-gorilla/websocket requires you to constantly read from the connection to respond to control frames
-even if you don't expect the peer to send any messages.
-
 The ping API is also much nicer. gorilla/websocket requires registering a pong handler on the Conn
 which results in awkward control flow. With nhooyr/websocket you use the Ping method on the Conn
 that sends a ping and also waits for the pong.
 
-In terms of performance, the differences depend on your application code. nhooyr/websocket
-reuses buffers efficiently out of the box if you use the wsjson and wspb subpackages whereas
-gorilla/websocket does not. As mentioned above, nhooyr/websocket also supports concurrent
-writers out of the box.
+In terms of performance, the differences mostly depend on your application code. nhooyr/websocket
+reuses message buffers out of the box if you use the wsjson and wspb subpackages.
+As mentioned above, nhooyr/websocket also supports concurrent writers.
 
-The only performance con to nhooyr/websocket is that uses two extra goroutines. One for
-reading pings, pongs and close frames async to application code and another to support
-context.Context cancellation. This costs 4 KB of memory which is cheap compared
-to the benefits.
+The only performance con to nhooyr/websocket is that uses one extra goroutine to support
+cancellation with context.Context and the net/http client side body upgrade.
+This costs 2 KB of memory which is cheap compared to simplicity benefits.
 
 ### x/net/websocket
 

accept.go

@@ -81,9 +81,6 @@ func verifyClientRequest(w http.ResponseWriter, r *http.Request) error {
 // Accept will reject the handshake if the Origin domain is not the same as the Host unless
 // the InsecureSkipVerify option is set. In other words, by default it does not allow
 // cross origin requests.
-//
-// The returned connection will be bound by r.Context(). Use conn.Context() to change
-// the bounding context.
 func Accept(w http.ResponseWriter, r *http.Request, opts AcceptOptions) (*Conn, error) {
 	c, err := accept(w, r, opts)
 	if err != nil {
@@ -109,7 +106,7 @@ func accept(w http.ResponseWriter, r *http.Request, opts AcceptOptions) (*Conn,
 	hj, ok := w.(http.Hijacker)
 	if !ok {
 		err = xerrors.New("passed ResponseWriter does not implement http.Hijacker")
-		http.Error(w, http.StatusText(http.StatusInternalServerError), http.StatusInternalServerError)
+		http.Error(w, http.StatusText(http.StatusNotImplemented), http.StatusNotImplemented)
 		return nil, err
 	}
 
@@ -143,7 +140,6 @@ func accept(w http.ResponseWriter, r *http.Request, opts AcceptOptions) (*Conn,
 		closer:      netConn,
 	}
 	c.init()
-	c.Context(r.Context())
 
 	return c, nil
 }

example_test.go

@@ -59,3 +59,45 @@ func ExampleDial() {
 
 	c.Close(websocket.StatusNormalClosure, "")
 }
+
+// This example shows how to correctly handle a WebSocket connection
+// on which you will only write and do not expect to read data messages.
+func Example_writeOnly() {
+	fn := http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		c, err := websocket.Accept(w, r, websocket.AcceptOptions{})
+		if err != nil {
+			log.Println(err)
+			return
+		}
+		defer c.Close(websocket.StatusInternalError, "the sky is falling")
+
+		ctx, cancel := context.WithTimeout(r.Context(), time.Minute*10)
+		defer cancel()
+
+		go func() {
+			defer cancel()
+			c.Reader(ctx)
+			c.Close(websocket.StatusPolicyViolation, "server doesn't accept data messages")
+		}()
+
+		t := time.NewTicker(time.Second * 30)
+		defer t.Stop()
+
+		for {
+			select {
+			case <-ctx.Done():
+				c.Close(websocket.StatusNormalClosure, "")
+				return
+			case <-t.C:
+				err = wsjson.Write(ctx, c, "hi")
+				if err != nil {
+					log.Println(err)
+					return
+				}
+			}
+		}
+	})
+
+	err := http.ListenAndServe("localhost:8080", fn)
+	log.Fatal(err)
+}

header.go

@@ -31,10 +31,19 @@ type header struct {
 	maskKey [4]byte
 }
 
+func makeWriteHeaderBuf() []byte {
+	return make([]byte, maxHeaderSize)
+}
+
 // bytes returns the bytes of the header.
 // See https://tools.ietf.org/html/rfc6455#section-5.2
-func marshalHeader(h header) []byte {
-	b := make([]byte, 2, maxHeaderSize)
+func writeHeader(b []byte, h header) []byte {
+	if b == nil {
+		b = makeWriteHeaderBuf()
+	}
+
+	b = b[:2]
+	b[0] = 0
 
 	if h.fin {
 		b[0] |= 1 << 7
@@ -75,12 +84,20 @@ func marshalHeader(h header) []byte {
 	return b
 }
 
+func makeReadHeaderBuf() []byte {
+	return make([]byte, maxHeaderSize-2)
+}
+
 // readHeader reads a header from the reader.
 // See https://tools.ietf.org/html/rfc6455#section-5.2
-func readHeader(r io.Reader) (header, error) {
-	// We read the first two bytes directly so that we know
+func readHeader(b []byte, r io.Reader) (header, error) {
+	if b == nil {
+		b = makeReadHeaderBuf()
+	}
+
+	// We read the first two bytes first so that we know
 	// exactly how long the header is.
-	b := make([]byte, 2, maxHeaderSize-2)
+	b = b[:2]
 	_, err := io.ReadFull(r, b)
 	if err != nil {
 		return header{}, err

header_test.go

@@ -24,15 +24,15 @@ func TestHeader(t *testing.T) {
 	t.Run("readNegativeLength", func(t *testing.T) {
 		t.Parallel()
 
-		b := marshalHeader(header{
+		b := writeHeader(nil, header{
 			payloadLength: 1<<16 + 1,
 		})
 
 		// Make length negative
 		b[2] |= 1 << 7
 
 		r := bytes.NewReader(b)
-		_, err := readHeader(r)
+		_, err := readHeader(nil, r)
 		if err == nil {
 			t.Fatalf("unexpected error value: %+v", err)
 		}
@@ -90,9 +90,9 @@ func TestHeader(t *testing.T) {
 }
 
 func testHeader(t *testing.T, h header) {
-	b := marshalHeader(h)
+	b := writeHeader(nil, h)
 	r := bytes.NewReader(b)
-	h2, err := readHeader(r)
+	h2, err := readHeader(nil, r)
 	if err != nil {
 		t.Logf("header: %#v", h)
 		t.Logf("bytes: %b", b)

internal/bpool/bpool_test.go

@@ -32,7 +32,6 @@ func BenchmarkSyncPool(b *testing.B) {
 
 				p := sync.Pool{}
 
-				b.ResetTimer()
 				for i := 0; i < b.N; i++ {
 					buf := p.Get()
 					if buf == nil {