Fix Zigbee name stylization (openhab#13954)

Signed-off-by: Jacob Laursen <jacob-github@vindvejr.dk>
Signed-off-by: Andras Uhrin <andras.uhrin@gmail.com>

bundles/org.openhab.binding.hue/README.md

@@ -8,21 +8,21 @@ The integration happens through the Hue Bridge, which acts as an IP gateway to t
 ## Supported Things
 
 The Hue Bridge is required as a "bridge" for accessing any other Hue device.
-It supports the ZigBee LightLink protocol as well as the upwards compatible ZigBee 3.0 protocol.
+It supports the Zigbee Light Link protocol as well as the upwards compatible Zigbee 3.0 protocol.
 There are two types of Hue Bridges, generally referred to as v1 (the rounded version) and v2 (the squared version).
 Only noticeable difference between the two generation of bridges is the added support for Apple HomeKit in v2.
 Both bridges are fully supported by this binding.
 
 Almost all available Hue devices are supported by this binding.
 This includes not only the "Friends of Hue", but also products like the LivingWhites adapter.
-Additionally, it is possible to use OSRAM Lightify devices as well as other ZigBee LightLink compatible products, including the IKEA TRÅDFRI lights (when updated).
-Beside bulbs and luminaires the Hue binding also supports some ZigBee sensors. Currently only Hue specific sensors are tested successfully (Hue Motion Sensor and Hue Dimmer Switch).
+Additionally, it is possible to use OSRAM Lightify devices as well as other Zigbee Light Link compatible products, including the IKEA TRÅDFRI lights (when updated).
+Beside bulbs and luminaires the Hue binding also supports some Zigbee sensors. Currently only Hue specific sensors are tested successfully (Hue Motion Sensor and Hue Dimmer Switch).
 Please note that the devices need to be registered with the Hue Bridge before it is possible for this binding to use them.
 
-The Hue binding supports all seven types of lighting devices defined for ZigBee LightLink ([see page 24, table 2](https://www.nxp.com/docs/en/user-guide/JN-UG-3091.pdf).
+The Hue binding supports all seven types of lighting devices defined for Zigbee Light Link ([see page 24, table 2](https://www.nxp.com/docs/en/user-guide/JN-UG-3091.pdf).
 These are:
 
-| Device type              | ZigBee Device ID | Thing type |
+| Device type              | Zigbee Device ID | Thing type |
 |--------------------------|------------------|------------|
 | On/Off Light             | 0x0000           | 0000       |
 | On/Off Plug-in Unit      | 0x0010           | 0010       |
@@ -46,13 +46,13 @@ The following matrix lists the capabilities (channels) for each type:
 |  0210       |    X   |            |   X   |          X        |
 |  0220       |    X   |     X      |       |          X        |
 
-Beside bulbs and luminaires the Hue binding supports some ZigBee sensors.
+Beside bulbs and luminaires the Hue binding supports some Zigbee sensors.
 Currently only Hue specific sensors are tested successfully (e.g. Hue Motion Sensor, Hue Dimmer Switch, Hue Tap, CLIP Sensor).
 The Hue Motion Sensor registers a `ZLLLightLevel` sensor (0106), a `ZLLPresence` sensor (0107) and a `ZLLTemperature` sensor (0302) in one device.
 The Hue CLIP Sensor saves scene states with status or flag for HUE rules.
-They are presented by the following ZigBee Device ID and _Thing type_:
+They are presented by the following Zigbee Device ID and _Thing type_:
 
-| Device type                 | ZigBee Device ID | Thing type     |
+| Device type                 | Zigbee Device ID | Thing type     |
 |-----------------------------|------------------|----------------|
 | Light Sensor                | 0x0106           | 0106           |
 | Occupancy Sensor            | 0x0107           | 0107           |

bundles/org.openhab.binding.miele/README.md

@@ -2,14 +2,14 @@
 
 This binding integrates Miele@home appliances.
 Miele@home allows controlling Miele appliances that are equipped with special communication modules.
-There are devices that communicate through ZigBee and others that use WiFi.
+There are devices that communicate through Zigbee and others that use WiFi.
 
 See [www.miele.de](https://www.miele.de) for the list of available appliances.
 
 ## Supported Things
 
 This binding requires the XGW3000 gateway from Miele as all integration with openHAB is done through this gateway.
-While users with ZigBee-enabled Miele appliances usually own such a gateway, this is often not the case for people that have only WiFi-enabled appliances.
+While users with Zigbee-enabled Miele appliances usually own such a gateway, this is often not the case for people that have only WiFi-enabled appliances.
 
 The types of appliances that are supported by this binding are:
 

bundles/org.openhab.binding.mihome/README.md

@@ -1,7 +1,7 @@
 # Xiaomi Mi Smart Home Binding
 
 This binding allows your openHAB to communicate with the Xiaomi Smart Home Suite.
-It consists of devices communicating over a ZigBee network with a ZigBee - WiFi gateway.
+It consists of devices communicating over a Zigbee network with a Zigbee - WiFi gateway.
 
 The devices are very affordable and you can get them from your favourite Chinese markets like [AliExpress](https://www.aliexpress.com/) or [GearBest](https://www.gearbest.com).
 The sensors run on a coin cell battery for over a year.

bundles/org.openhab.binding.openwebnet/README.md

@@ -1,16 +1,16 @@
 # OpenWebNet (BTicino/Legrand) Binding
 
-This binding integrates BTicino / Legrand MyHOME® BUS and ZigBee wireless (MyHOME_Play®) devices using the [OpenWebNet](https://en.wikipedia.org/wiki/OpenWebNet) protocol.
+This binding integrates BTicino / Legrand MyHOME® BUS and Zigbee wireless (MyHOME_Play®) devices using the [OpenWebNet](https://en.wikipedia.org/wiki/OpenWebNet) protocol.
 
 The binding supports:
 
-- both wired BUS/SCS (MyHOME) and wireless setups (MyHOME ZigBee). The two networks can be configured simultaneously
-- auto discovery of BUS/SCS IP and ZigBee USB gateways; auto discovery of devices
+- both wired BUS/SCS (MyHOME) and wireless setups (MyHOME Zigbee). The two networks can be configured simultaneously
+- auto discovery of BUS/SCS IP and Zigbee USB gateways; auto discovery of devices
 - commands from openHAB and feedback (events) from BUS/SCS and wireless network
 
 ![MyHOMEServer1 Gateway](doc/MyHOMEServer1_gateway.jpg)
 ![F454 Gateway](doc/F454_gateway.png)
-![ZigBee USB Gateway](doc/USB_gateway.jpg)
+![Zigbee USB Gateway](doc/USB_gateway.jpg)
 
 ## Supported Things
 
@@ -29,7 +29,7 @@ These gateways have been tested with the binding:
 [MH200N](https://www.homesystems-legrandgroup.com/home?p_p_id=it_smc_bticino_homesystems_search_AutocompletesearchPortlet&p_p_lifecycle=0&p_p_state=normal&p_p_mode=view&_it_smc_bticino_homesystems_search_AutocompletesearchPortlet_journalArticleId=2469209&_it_smc_bticino_homesystems_search_AutocompletesearchPortlet_mvcPath=%2Fview_journal_article_content.jsp),
 [F453](https://www.homesystems-legrandgroup.com/home?p_p_id=it_smc_bticino_homesystems_search_AutocompletesearchPortlet&p_p_lifecycle=0&p_p_state=normal&p_p_mode=view&_it_smc_bticino_homesystems_search_AutocompletesearchPortlet_journalArticleId=2703566&_it_smc_bticino_homesystems_search_AutocompletesearchPortlet_mvcPath=%2Fview_journal_article_content.jsp),  etc.
 
-- **ZigBee USB Gateways**, such as [BTicino 3578](https://catalogo.bticino.it/BTI-3578-IT), also known as Legrand 088328
+- **Zigbee USB Gateways**, such as [BTicino 3578](https://catalogo.bticino.it/BTI-3578-IT), also known as Legrand 088328
 
 **NOTE** The new BTicino Living Now® and Livinglight Smart® wireless systems are not supported by this binding as they do not use the OpenWebNet protocol.
 
@@ -49,13 +49,13 @@ The following Things and OpenWebNet `WHOs` are supported:
 | Dry Contact and IR Interfaces |    `25`     |                    `bus_dry_contact_ir`                    | Dry Contacts and IR Interfaces                                   | Successfully tested: contact interfaces F428 and 3477; IR sensors: HC/HD/HS/L/N/NT4610      |
 | Energy Management             |    `18`     |                     `bus_energy_meter`                     | Energy Management                                                | Successfully tested: F520, F521. Partially tested: F522, F523                               |
 
-### For ZigBee (Radio)
+### For Zigbee (Radio)
 
 | Category             | WHO    | Thing Type IDs                                        | Description                                                           | Status                               |
 | -------------------- | :----: | :---------------------------------------------------: | :-------------------------------------------------------------------: | ------------------------------------ |
-| Gateway Management   | `13`   | `zb_gateway`                                          | ZigBee USB Gateway (models: BTI-3578 / LG 088328)                     | Tested: BTI-3578 and LG 088328       |
-| Lighting             | `1`    | `zb_dimmer`, `zb_on_off_switch`, `zb_on_off_switch2u` | ZigBee dimmers, switches and 2-unit switches                          | Tested: BTI-4591, BTI-3584, BTI-4585 |
-| Automation           | `2`    | `zb_automation`                                       | ZigBee roller shutters                                                |                                      |
+| Gateway Management   | `13`   | `zb_gateway`                                          | Zigbee USB Gateway (models: BTI-3578 / LG 088328)                     | Tested: BTI-3578 and LG 088328       |
+| Lighting             | `1`    | `zb_dimmer`, `zb_on_off_switch`, `zb_on_off_switch2u` | Zigbee dimmers, switches and 2-unit switches                          | Tested: BTI-4591, BTI-3584, BTI-4585 |
+| Automation           | `2`    | `zb_automation`                                       | Zigbee roller shutters                                                |                                      |
 
 ## Discovery
 
@@ -78,20 +78,20 @@ Setting the parameter `discoveryByActivation=true` for a BUS gateway Thing makes
 
 If a device cannot be discovered automatically from Inbox it's always possible to add it manually, see [Configuring Devices](#configuring-devices).
 
-### ZigBee Discovery
+### Zigbee Discovery
 
-- The ZigBee USB Gateway must be inserted in one of the USB ports of the openHAB computer before a discovery is started
+- The Zigbee USB Gateway must be inserted in one of the USB ports of the openHAB computer before a discovery is started
 - _**IMPORTANT NOTE:**_ As for other openHAB bindings using the USB/serial ports, on Linux the `openhab` user must be member of the `dialout` group to be able to use USB/serial port; set the group with the following command:
 
 ```shell
 sudo usermod -a -G dialout openhab
 ```
 
 - The user will need to logout and login to see the new group added. If you added your user to this group and still cannot get permission, reboot Linux to ensure the new group permission is attached to the `openhab` user.
-- Once the ZigBee USB Gateway is added and online, a second Inbox Scan will discover devices connected to it. Because of the ZigBee radio network, device discovery will take ~40-60 sec. Be patient!
-- Wireless devices must be part of the same ZigBee network of the ZigBee USB Gateway to discover them. Please refer to [this video by BTicino](https://www.youtube.com/watch?v=CoIgg_Xqhbo) to setup a ZigBee wireless network which includes the ZigBee USB Gateway
-- Only powered wireless devices part of the same ZigBee network and within radio coverage of the ZigBee USB Gateway will be discovered. Unreachable or not powered devices will be discovered as _GENERIC_ devices and cannot be controlled
-- Wireless control units cannot be discovered by the ZigBee USB Gateway and therefore are not supported
+- Once the Zigbee USB Gateway is added and online, a second Inbox Scan will discover devices connected to it. Because of the Zigbee radio network, device discovery will take ~40-60 sec. Be patient!
+- Wireless devices must be part of the same Zigbee network of the Zigbee USB Gateway to discover them. Please refer to [this video by BTicino](https://www.youtube.com/watch?v=CoIgg_Xqhbo) to setup a Zigbee wireless network which includes the Zigbee USB Gateway
+- Only powered wireless devices part of the same Zigbee network and within radio coverage of the Zigbee USB Gateway will be discovered. Unreachable or not powered devices will be discovered as _GENERIC_ devices and cannot be controlled
+- Wireless control units cannot be discovered by the Zigbee USB Gateway and therefore are not supported
 
 ## Thing Configuration
 
@@ -110,14 +110,14 @@ Configuration parameters are:
 
 Alternatively the BUS/SCS Gateway thing can be configured using the `.things` file, see `openwebnet.things` example [below](#full-example).
 
-### Configuring Wireless ZigBee USB Gateway
+### Configuring Wireless Zigbee USB Gateway
 
 Configuration parameters are:
 
-- `serialPort` : the serial port where the ZigBee USB Gateway is connected (`String`, _mandatory_)
+- `serialPort` : the serial port where the Zigbee USB Gateway is connected (`String`, _mandatory_)
   - Examples: `/dev/ttyUSB0` (Linux/RaPi), `COM3` (Windows)
 
-Alternatively the ZigBee USB Gateway thing can be configured using the `.things` file, see `openwebnet.things` example [below](#full-example).
+Alternatively the Zigbee USB Gateway thing can be configured using the `.things` file, see `openwebnet.things` example [below](#full-example).
 
 ### Configuring Devices
 
@@ -137,7 +137,7 @@ For any manually added device, you must configure:
     - energy meter F520/F521 numbered `1`: add `5` before  --> `where="51"`
     - energy meter F522/F523 numbered `4`: add `7` before and `#0` after --> `where="74#0"`
     - alarm zone `2` --> `where="2"`
-  - example for ZigBee devices: `where=765432101#9`. The ID of the device (ADDR part) is usually written in hexadecimal on the device itself, for example `ID 0074CBB1`: convert to decimal (`7654321`) and add `01#9` at the end to obtain `where=765432101#9`. For 2-unit switch devices (`zb_on_off_switch2u`), last part should be `00#9`.
+  - example for Zigbee devices: `where=765432101#9`. The ID of the device (ADDR part) is usually written in hexadecimal on the device itself, for example `ID 0074CBB1`: convert to decimal (`7654321`) and add `01#9` at the end to obtain `where=765432101#9`. For 2-unit switch devices (`zb_on_off_switch2u`), last part should be `00#9`.
 
 #### Configuring Thermo
 
@@ -210,7 +210,7 @@ OPEN command to execute: *5*8#134##
 
 | Channel Type ID (channel ID)            | Applies to Thing Type IDs                                     | Item Type     | Description                                                                                                           | Read/Write  |
 |-----------------------------------------|---------------------------------------------------------------|---------------|-----------------------------------------------------------------------------------------------------------------------|:-----------:|
-| `switch` or `switch_01`/`02` for ZigBee | `bus_on_off_switch`, `zb_on_off_switch`, `zb_on_off_switch2u` | Switch        | To switch the device `ON` and `OFF`                                                                                   |     R/W     |
+| `switch` or `switch_01`/`02` for Zigbee | `bus_on_off_switch`, `zb_on_off_switch`, `zb_on_off_switch2u` | Switch        | To switch the device `ON` and `OFF`                                                                                   |     R/W     |
 | `brightness`                            | `bus_dimmer`, `zb_dimmer`                                     | Dimmer        | To adjust the brightness value (Percent, `ON`, `OFF`)                                                                 |     R/W     |
 | `shutter`                               | `bus_automation`                                              | Rollershutter | To activate roller shutters (`UP`, `DOWN`, `STOP`, Percent - [see Shutter position](#shutter-position))               |     R/W     |
 | `scenario`                              | `bus_scenario_control`                                        | String        | Trigger channel for Basic scenario events [see possible values](#scenario-channels)                                   | R (TRIGGER) |
@@ -334,7 +334,7 @@ Bridge openwebnet:bus_gateway:mybridge "MyHOMEServer1" [ host="192.168.1.35", pa
 }
 ```
 
-ZigBee USB Gateway and things configuration - for radio devices:
+Zigbee USB Gateway and things configuration - for radio devices:
 
 ```java
 Bridge openwebnet:zb_gateway:myZBgateway  [ serialPort="COM3" ] {
@@ -400,7 +400,7 @@ Switch              iAlarm_Zone_3_State         "Zone 3 state"                 (
 String              iAlarm_Zone_3_Alarm         "Zone 3 alarm"                 (gAlarm)         { channel="openwebnet:bus_alarm_zone:mybridge:Alarm_Zone_3:alarm" }
 ```
 
-Example items linked to OpenWebNet ZigBee devices:
+Example items linked to OpenWebNet Zigbee devices:
 
 ```java
 Dimmer          iDimmer             "Dimmer [%.0f %%]"                  <DimmableLight>  (gKitchen)                   [ "Lighting" ]  { channel="openwebnet:zb_dimmer:myZBgateway:myZB_dimmer:brightness" }

bundles/org.openhab.binding.openwebnet/src/main/java/org/openhab/binding/openwebnet/internal/OpenWebNetBindingConstants.java

@@ -44,7 +44,7 @@ public class OpenWebNetBindingConstants {
     public static final String THING_LABEL_GENERIC_DEVICE = "GENERIC Device";
     // bridges
     public static final ThingTypeUID THING_TYPE_ZB_GATEWAY = new ThingTypeUID(BINDING_ID, "zb_gateway");
-    public static final String THING_LABEL_ZB_GATEWAY = "ZigBee USB Gateway";
+    public static final String THING_LABEL_ZB_GATEWAY = "Zigbee USB Gateway";
     public static final ThingTypeUID THING_TYPE_BUS_GATEWAY = new ThingTypeUID(BINDING_ID, "bus_gateway");
     public static final String THING_LABEL_BUS_GATEWAY = "BUS Gateway";
     // other thing types
@@ -81,14 +81,14 @@ public class OpenWebNetBindingConstants {
     public static final String THING_LABEL_BUS_AUX = "Auxiliary";
     // ZIGBEE
     public static final ThingTypeUID THING_TYPE_ZB_ON_OFF_SWITCH = new ThingTypeUID(BINDING_ID, "zb_on_off_switch");
-    public static final String THING_LABEL_ZB_ON_OFF_SWITCH = "ZigBee Switch";
+    public static final String THING_LABEL_ZB_ON_OFF_SWITCH = "Zigbee Switch";
     public static final ThingTypeUID THING_TYPE_ZB_ON_OFF_SWITCH_2UNITS = new ThingTypeUID(BINDING_ID,
             "zb_on_off_switch2u");
-    public static final String THING_LABEL_ZB_ON_OFF_SWITCH_2UNITS = "ZigBee 2-units Switch";
+    public static final String THING_LABEL_ZB_ON_OFF_SWITCH_2UNITS = "Zigbee 2-units Switch";
     public static final ThingTypeUID THING_TYPE_ZB_DIMMER = new ThingTypeUID(BINDING_ID, "zb_dimmer");
-    public static final String THING_LABEL_ZB_DIMMER = "ZigBee Dimmer";
+    public static final String THING_LABEL_ZB_DIMMER = "Zigbee Dimmer";
     public static final ThingTypeUID THING_TYPE_ZB_AUTOMATION = new ThingTypeUID(BINDING_ID, "zb_automation");
-    public static final String THING_LABEL_ZB_AUTOMATION = "ZigBee Automation";
+    public static final String THING_LABEL_ZB_AUTOMATION = "Zigbee Automation";
 
     // #SUPPORTED THINGS SETS
     // ## Generic

bundles/org.openhab.binding.openwebnet/src/main/java/org/openhab/binding/openwebnet/internal/discovery/OpenWebNetDeviceDiscoveryService.java

@@ -206,7 +206,7 @@ public void newDiscoveryResult(@Nullable Where where, OpenDeviceType deviceType,
             default:
                 logger.warn("Device type {} is not supported, default to GENERIC device (WHERE={})", deviceType, where);
                 if (where instanceof WhereZigBee) {
-                    thingLabel = "ZigBee " + thingLabel;
+                    thingLabel = "Zigbee " + thingLabel;
                 }
                 if (baseMsg != null) {
                     deviceWho = baseMsg.getWho();