Add support for rp2350 micro-controllers (#6725) #455
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Recent versions of the rp2040 sdk no longer contain the elf2uf2 tool. So, move that code to a new dedicated directory. This is in preparation for updating the rp2040 sdk version. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
A new version of can2040 is needed due to changes in the 2.0.0 release of the pico-sdk. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This is in preparation for adding support for rp2350 mcus. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Rename the Kconfig symbols. This is in preparation to adding support for the rp2350 mcu. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This is in preparation for adding rp2350 flash support. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This is in preparation for rp2350 support. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Rewrite chipid.c so that it contains just the USB and canbus id manipulation code. Move the low-level chipid reading to bootrom.c. Also, introduce a new bootrom_reboot_usb_bootloader() function in bootrom.c so that the main.c code does not need to know the specifics of rebooting into the bootrom. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This adds the bootrom code needed to implement "reboot into bootloader" and "chipid" capabilities. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Some versions of the system memcpy() may make unaligned memory accesses, which can result in a bus fault when accessing the usb dpram device memory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The rp2350 chip requires a higher internal frequency, so choose a value that works for both rp2040 and rp2350. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This adds support for the new Raspberry Pi RP2350 micro-controllers. This has also been discussed at: https://klipper.discourse.group/t/support-for-rp2350-micro-controllers/19656
Note that the rp2350 has a serious hardware defect (RP2350-E9 errata) and as a result I do not recommend using this chip currently. See the link above for more details.
The code on this PR has a few known limitations (to be addressed in future PRs):
Only the first 30 GPIOs are supported. Support for the additional GPIOs on the rp2350b has not been added (nor support for ADC in general on the rp2350b).
-Kevin
EDIT: The chipid and reboot into bootloader functionality has also been implemented in this PR.
Klipper PR: Klipper3d/klipper#6725