moonlight.conf

## Hostname or IP-address of host to connect to
## By default host is autodiscovered using mDNS
#address = 1.2.3.4

## Video streaming configuration
#width = 1280
#height = 720
#fps = 60

## Output rotation (independent of xrandr or framebuffer settings!)
## Allowed values: 0, 90, 180, 270
#rotate = 0

## Bitrate depends by default on resolution and fps
## Set to -1 to enable default
## 20Mbps (20000) for 1080p (60 fps)
## 10Mbps (10000) for 1080p or 60 fps
## 5Mbps (5000) for lower resolution or fps
#bitrate = -1

## Size of network packets should be lower than MTU
## If streaming with WAN optimizations, this will be capped at 1024.
#packetsize = 1392

## Select video codec (auto/h264/h265)
#codec = auto

## Default started application on host
#app = Steam

## Default used mapping for streaming
## Searched for in $XDG_DATA_DIRS/moonlight or /usr/share/moonlight and /usr/local/share/moonlight
## Mapping can also be user overrided in $XDG_CONFIG_DIR/moonlight or ~/.config/moonlight or current directory
#mapping = gamecontrollerdb.txt

## Enable selected input devices
## By default all available input devices should be used
## Only evdev devices /dev/input/event* are allowed
## To use a different mapping then default another mapping should be declared above the input
#input = /dev/input/event1

## Enable GFE for changing graphical game settings for optimal performance and quality
#sops = true

## Play audio on host instead of streaming to client
#localaudio = false

## Send quit app request to remote after quitting session
#quitappafter = false

## Disable all input processing (view-only mode)
#viewonly = false

## Select audio device to play sound on
#audio = sysdefault

## Select the audio and video decoder to use
## default - autodetect
## aml - hardware video decoder for ODROID-C1/C2
## rk  - hardware video decoder for ODROID-N1 Rockchip
## omx - hardware video decoder for Raspberry Pi
## imx - hardware video decoder for i.MX6 devices
## x11 - software decoder
## sdl - software decoder with SDL input and audio
## fake - no audio and video
#platform = default

## Directory to store encryption keys
## By default keys are stored in $XDG_CACHE_DIR/moonlight or ~/.cache/moonlight
#keydir = /dir/to/keys

## Enable QOS settings to optimize for internet or local network
## yes - optimize for WAN streaming
## no - optimize for LAN streaming
## auto (default) - decide automatically based on target IP address
#remote = auto

## Enable 5.1/7.1 surround sound
#surround = 5.1

## Load additional configuration files
#config = /path/to/config