[BUG] Okay/Confirmation Infinity Loop, when Filament Runs out

[windows2000bug]

Description

I am testing Fil sensor run out and it is failing with the TFT28.

Steps to reproduce

1. I pull out the test piece out of the fil sensor to trigger the M600. The head parks.
2. Put test filament back into fil sensor and press okay on screen. The extruder starts to run for a second or two.
3. Get okay prompts, and it says that it is being paused. This keeps happening. It seems I am locked out and have to restart the printer.

Expected behavior
Print Resumes

Actual behavior
Infinity Loop

Hardware Variant

Stock TFT - Fil Sensor Disconnected from TFT

TFT Firmware Version & Main Board Firmware details

Artillery X1

SKR 1.4T Board w/ Marlin 2.x - Fil Sensor Directly plugged into Main board.
OctoPrint w/ recommended M600 Firmware

Additional Information

I did the set fil_runout to 0 as the comments for this section states for fil sensors directly connected to TFT. I assume I found a bug or the comment/documentation is wrong.

#--------------------------------------------------------------------

Filament Runout Settings (if connected to TFT Controller)

#--------------------------------------------------------------------

Default FIlament Sensor

Options: [NONE: 0, Normal: 1, SMART: 2]

fil_runout:0

• Include a ZIP file containing your Configuration.h or use Pastebin and paste a link in this issue.
• Provide pictures or links to videos that clearly demonstrate the issue.

[someitalian123]

Not much to add other than I too am experiencing this same bug. Willing to post any logs, or configs as you let me know what you need.