Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at r…

Enable inclusion of both ESP32 Blynk BT / BLE and WiFi libraries. Then run both WiFi and BT/BLE simultaneously, or select one to use at runtime after reboot. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM.

A project that logs data from sofar solar inverter and sends the data to blynk server using RS485 modbus interface.

Simple WiFiManager for Blynk and ESP32 with or without SSL, configuration data saved in either SPIFFS or EEPROM. Enable inclusion of both ESP32 Blynk BT/BLE and WiFi libraries. Then select one at reboot or run both. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM. Using AsyncWebServer …

Connect the sonoff to the internet using the blynk app, you can also use a physical wall switch or add a DHT22 sensor

Espegi is an alternative firmware for ESP8266 based devices like iTead Sonoff with web UI, OTA updates, and Blynk support.

Enable Blynk support of Teensy boards, especially latest Teensy 4.0, using WiFi, Ethernet, BT/BLE and GSM/GPRS shield

IoT-based Pulse and Blood-oxygen Monitoring System, which will allow doctors to monitor the Pulse and Blood-oxygen level of quarantined/remote patients through the Blynk IoT App.

This is an IOT project you can control any electronics by plug them in a smart plug which we gonna make. you can control to make something on while your outside like turn an fan on before you come home.

This is the library, designed to help you eliminate hardcoding your Blynk credentials in Mega 1280, Mega 2560, Mega ADK, Teensy, SAM DUE, SAMD, RP2040-based, etc. boards using with Ethernet shields (W5100, W5200, W5500, ENC28J60, etc).

A smartphone-controlled automated gardening system built using Arduino and Blynk.

An embedded solution to e-governance and vehicle management on the road. college project for final year

โครงงานกลอนประตูเทคโนโลยี IoT แต่เปลี่ยนจากการตรวจจับใบหน้าเป็นการแสกน RFID

Web Client for Blynk