forked from NREL/GEOPHIRES-X
-
Notifications
You must be signed in to change notification settings - Fork 1
/
example10_HP.txt
76 lines (65 loc) · 3.33 KB
/
example10_HP.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
# Example 10: Heat Pump: Geothermal Combined Heat and Power Problem using a Thermal Drawdown Reservoir Model and BICYCLE Economic Model
# This example problem considers an EGS reservoir at 3.1km depth.
# The heat is used in a combined heat and power topping cycle model with double flash as
# topping cycle and electricity considered as the main product.
# ***Subsurface technical parameters***
# *************************************
Reservoir Model,3, ---m/A Single Fracture Thermal Drawdown
Drawdown Parameter,.00002, ---[kg/s/m2]
Reservoir Depth,2.1, ---[km]
Number of Segments,1, ---[-]
Gradient 1,45, ---[deg.C/km]
Maximum Temperature,400, ---[deg.C]
Number of Production Wells,2, ---[-]
Number of Injection Wells,2, ---[-]
Production Well Diameter,8.5, ---[inch]
Injection Well Diameter,8.5, ---[inch]
Ramey Production Wellbore Model,0, ---Should be 0 (disabled) or 1 (enabled)
Production Wellbore Temperature Drop,5, ---[deg.C]
Injection Wellbore Temperature Gain,3, ---[deg.C]
Production Flow Rate per Well,70, ---[kg/s]
Reservoir Volume Option,1, ---Should be 1,2,3 or 4. See manual for details.
Fracture Shape,1, ---Should be 1,2,3 or 4
Fracture Area,200000, ---[m2]
Number of Fractures,12, ---[-]
Fracture Separation,80, ---[m]
Injectivity Index,5, ---[kg/s/bar]
Injection Temperature,80, ---[deg.C]
Maximum Drawdown,1, ---[-] no redrilling considered
Reservoir Heat Capacity,1000, ---[J/kg/K]
Reservoir Density,3000, ---[kg/m3]
Reservoir Thermal Conductivity,3, ---[W/m/K]
Water Loss Fraction,0.02, ---[-]
# ***Surface Technical Parameters***
# **********************************
End-Use Option, 2, --- Direct use
Power Plant Type, 6, ---[-] Heat Pump
Circulation Pump Efficiency,.80, ---[-]
Utilization Factor,.9, ---[-]
End-Use Efficiency Factor,.9, ---[-]
Surface Temperature,15, ---[deg.C]
Ambient Temperature,15, ---[deg.C]
Heat Pump COP, 2.8, --- [-]
# ***Financial Parameters***
# **************************
Plant Lifetime,30, ---[years]
Economic Model,2, ---BICYCLE Levelized Cost Model
Discount Rate, 0.05, --- [-] Required if Standard LCOE/LCOH model is selected. See manual for details.
Inflation Rate During Construction,0.05, ---[-]
# ***Capital and O&M Cost Parameters***
# *************************************
Well Drilling and Completion Capital Cost Adjustment Factor,1, ---[-] use built in correlations
Well Drilling Cost Correlation,1, ---[-] use built in correlations
Reservoir Stimulation Capital Cost Adjustment Factor,1, ---[-] use built in correlations
Surface Plant Capital Cost Adjustment Factor,1, ---[-] use built in correlations
Field Gathering System Capital Cost Adjustment Factor,1, ---[-] use built in correlations
Exploration Capital Cost Adjustment Factor,1, ---[-] use built in correlations
Wellfield O&M Cost Adjustment Factor,1, ---[-] use built in correlations
Surface Plant O&M Cost Adjustment Factor,1, ---[-] use built in correlations
Water Cost Adjustment Factor,1, ---[-] use built in correlations
Electricity Rate,.07, ---[$/kWh]
Heat Pump Capital Cost,3.74, --- [$M]
# ***Simulation Parameters***
# ***************************
Print Output to Console,1, ---Should be 1 (to print) or 0 (to not print)
Time steps per year,10, ---[-]