Skip to content

Latest commit

 

History

History
84 lines (74 loc) · 3.37 KB

README.md

File metadata and controls

84 lines (74 loc) · 3.37 KB
Raw

HASS-BBC-envirobit

Stream button presses and BME280 sensor readings over the serial from the BBC micropython envirobit to Home-Assistant.

BBC-envirobit setup

main.py should be flashed to tbe BBC microbit. On pressing the A or B buttons the display will scroll the pressed button. The buttons are displayed as a binary sensor in Home-Assistant and can be used to trigger automations. Data from the BME (temperature, pressure, humidity, but not altitude as these values were meaningless in my testing) are publihsed to Home-Assistant every second (the sleep time is a variable sleep_sec which you can optimise). The number of decimal places that data is reported to is 1dp by default, but can be varied with the rounding_digits variable. Plug the microbit into the USB port on your Home-Assistant computer.

Home-Assistant Usage with HASSOS

On HASSOS, the microbit is on /dev/ttyACM0

We can now configure Home-Assistant to display the data feed. I add to my Home-Assistant config:

sensor:
  - platform: serial
    serial_port: /dev/ttyACM0
    baudrate: 115200

We then use template sensors to break out the data fields. Under sensor:

  - platform: template
    sensors:
      temperature:
        friendly_name: Temperature_microbit
        unit_of_measurement: "°C"
        value_template: "{{ states.sensor.serial_sensor.attributes.T }}"

The final config for all sensors is:

sensor:
  - platform: serial
    serial_port: /dev/ttyACM0
    baudrate: 115200
  - platform: template
    sensors:
      temperature:
        friendly_name: Temperature_microbit
        unit_of_measurement: "°C"
        value_template: "{{ states.sensor.serial_sensor.attributes.T }}"
      pressure:
        friendly_name: Pressure_microbit
        unit_of_measurement: "hPa"
        value_template: "{{ states.sensor.serial_sensor.attributes.P }}"
      humidity:
        friendly_name: Humidity_microbit
        unit_of_measurement: "%"
        value_template: "{{ states.sensor.serial_sensor.attributes.H }}"

binary_sensor:
  - platform: template
    sensors:
      button_a:
        friendly_name: Button_A_microbit
        value_template: "{{ states.sensor.serial_sensor.attributes.ba |float > 0}}"
      button_b:
        friendly_name: Button_B_microbit
        value_template: "{{ states.sensor.serial_sensor.attributes.bb |float > 0}}"

history_graph:
  microbit:
    entities:
      - sensor.temperature
      - sensor.pressure
      - sensor.humidity

Mac usage

To check which port the microbit is on I run (on Mac/unix):

ls /dev/cu.*

In my case the microbit is connected on /dev/cu.usbmodem14342. I now use screen to check the data transmitted over the serial. In the terminal I launch screen with:

screen /dev/cu.usbmodem14342 115200

Note that if you get any funny errors when connecting, check that there is not already a screen session open using the Activity monitor, and kill any existing processes. You can also kill a screen session using ctrl + a + k.

Notes

I discovered that you can't mix numerical and text data in the payload string. If you try Home-Assistant displays no data.