This is a port of the NewRemoteSwitch for Arduino (by Randy Simons) to the Raspberry Pi as a Ruby gem.
It can be used to send and receive signals from and to the new A-series KlikAanKlikUit remote switches. Using a 433MHz transmitter and/or receiver connected to the GPIO ports on a Raspberry Pi. And from Ruby. Isn't that awesome?
If you haven't installed Ruby yet, then do that first:
$ sudo apt-get install ruby ruby-dev
This gem uses the wiringPi library, which should be installed as well:
$ sudo apt-get install wiringpi
Install the gem:
$ sudo gem install new_remote
If you want to use this library as a non-root user, then you need to add that user to the gpio group:
$ sudo usermod -a -G gpio username
require 'new_remote'
transmitter = NewRemote::Transmitter.new(address, pin, periodusec = 260, repeats = 4)The address parameter can be either a random number, or copied from your existing remote. You can use the Receiver to determine your remotes address.
The pin parameter is the GPIO pin where the transmitter is connected to. Please note that it uses the wiringPi pin numbering scheme.
For more details about the parameters, please read the comments in NewRemoteTransmitter.h.
The usage of the transmitter is pretty simple and almost needs no further explanation:
switch = transmitter.unit(0) # select first unit (range 0-15)
switch = transmitter.group # or select group
switch.on # switch on devices(s)
switch.off # switch off device(s)
switch.dim(8) # set dim level (range 0-15); also switches on device(s)The receive method loops forever and shows the received codes on the standard output.
require 'new_remote'
NewRemote::Receiver.receive(pin, repeats)The pin parameter is the GPIO pin where the receiver is connected to. Please note that it uses the wiringPi pin numbering scheme.
The repeats parameter indicates the number of times the same message must be received to be valid.
For more information about the inner working, please read the comments in NewRemoteReceiver.h.
After checking out the repo, run bin/setup to install dependencies. You can also run bin/console for an interactive prompt that will allow you to experiment.
To install this gem onto your local machine, run bundle exec rake install. To release a new version, update the version number in version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and tags, and push the .gem file to rubygems.org.
Bug reports and pull requests are welcome on GitHub at https://github.com/ppostma/NewRemoteSwitch.
The gem is available as open source under the terms of the GNU General Public License version 3.