operator_commands.txt

These operator commands are the commands that I use frequently. I will add more when I remember or learn from my experiences.

D A,L
D R,R
D R,L            => Display the system requests
D TS,L           => Display TSO users logged on to the system

D IPLINFO
D IOS,CONFIG     => Display if HyperPAV is active
D IOS,HYPERPAV
D IOS,GROUP      => Display the IOS group names and the systems that belong to each group

D PARMLIB
D SYMBOLS
D OPDATA
D OPDATA,MONITOR,[FULL]	

D U,VOL=[volname]
D U,,ALLOC,[unit_address],1
D U,,,3200
D U,,,3200,3
D U,,ONLINE     => Display all online devices
V 3200,[ONLINE || OFFLINE]
V 0D00-0D64,OFFLINE 
V 0700,CONSOLE  => Make console the device that have 0700 address.

D M
D M=CPU
D M=STOR
D M=ASM

CF CPU(id),ONLINE
CF CPU(id),OFFLINE

D SMS
D SMS,SG(ALL)
D SMS,VOL(volser)
D SMS,STORGRP(ALL),LISTVOL       => Display the storage groups and volumes

V SMS,PDSE1,ANALYSIS 
D PDSE1,PDSE1,HSPSTATS  

DISPLAY SMF
DISPLAY SMF,O
DISPLAY SMF,M    =>  Display the record types that are being collected.
SET SMF=xx
SWITCH SMF (i smf)

D SMFLIM,R

D LOGREC
D LOGREC,ALL
SETLOGRC LOGSTREAM
SETLOGRC DATASET

DISPLAY LOGGER
D LOGGER,STATUS
D LOGGER,LOGSTREAM    =>  Display logstream sysplex informationa
D LOGGER,L
D LOGGER,LOGSTREAM,LSNAME=[lsname]
D LOGGER,STR   =>  Display logstreams defined to any structure  
D LOGGER,CONNECTION  =>  Display all logstreams with connections to the system
D LOGGER,CONNECTION,LSN=log.stream.name,DETAIL
D LOGGER,IXGCNF		 =>  Display IXGCNFxx member's parameters 	
SETLOGR FORCE,DISCONNECT,LSN=log.stream.name    => Request Logger to force disconnect log streams
SETLOGR FORCE,DELETE,LSN=log.stream.name        => Request Logger to force delete log streams

DISPLAY XCF,C
DISPLAY XCF,C,TYPE=LOGR
D XCF,COUPLE,TYPE=SYSPLEX 
D XCF,STR
D XCF,STR,STRNAME=[strname]
D XCF,CF
D XCF,CF,CFNAME=[cfname]
D XCF,SYSPLEX
D XCF,SYSPLEX,ALL
D XCF,GRP
D XCF,GRP,[groupname]
SETXCF COUPLE,ACOUPLE=SYS1.DEVLPLEX.XCF.CDS01,TYPE=SYSPLEX  
SETXCF COUPLE,PSWITCH,TYPE=SYSPLEX
SETXCF COUPLE,ACOUPLE=SYS1.DEVLPLEX.XCF.CDS02,TYPE=SYSPLEX
SETXCF START,MAINTMODE,CFNAME=cfhame
SETXCF STOP,MAINTMODE,CFNAME=cfname
D XCF,REALLOCATE,TEST
SETXCF START,REALLOCATE 
D XCF,REALLOCATE,REPORT
SETXCF START,REBUILD,STRNAME=strname,LOC=OTHER
D XCF,ARMS,STATE=AVAIL

D C            =>   Display consoles
V OPERLOG,HARDCPY
V OPERLOG,HARDCPY,OFF
D C,HC,L=Z 
D C,HC 
D C,LIST 
D C,MASTER

DISPLAY EMCS

DISPLAY M=DEV(xxx)
DISPLAY M=CHP(cc)
DISPLAY M=CHP

DEVSERV QDASD,TYPE=ALL  => ALL OF THE DISK STORAGE
DS P,xxxx,1 (DEVSERV PATHS)
DS S,xxxx

D PROG,LNKLST
D PROG,LNKLST,NAMES 
D PROG,APF
D PROG,EXIT
D PROG,LPA,MOD=[modulename]
D PROG,EXIT,MOD=[modulename]
SET PROG=xx
SETPROG LNKLST,UPDATE,JOB=*
SETPROG LNKLST,UNDEFINE,LNKLSTxx
SETPROG APF,ADD,DSN=dns,[SMS|volume]
SETPROG APF,DELETE,DSNAME=dsn,[SMS|volume]

D LLA       => Display Library Lookaside
MODIFY LLA,REFRESH
MODIFY LLA,UPDATE=xx
D LLA,STATS
D LLA,STATS,LIBRARY=dsn,MEMBER=member,FETCHED

D DIAG

F HZR,ANALYZE

F HZSPROC,REFRESH,CHECK=(IBMCSV,CSV_APF_EXISTS)
F HZSPROC,RUN,CHECK=(IBMCSV,CSV_APF_EXISTS) 
F HZSPROC,DISPLAY,CHECKS

F CATALOG,OPEN  => List all catalogs
MODIFY CATALOG,ALLOCATED   => Allocated catalogs (same output with F CATALOG,OPEN)
F CATALOG,REPORT           => Provides basic information about some of the current limits and installation-specified defaults that are selected for the catalog address space,
F CATALOG,REPORT,PERFORMANCE   => Shows performance statistics, such as response time, for all the types of catalog events
F CATALOG,REPORT,PERFORMANCE(RESET)  => Reset all performance statistics being accumulated
F CATALOG,REPORT,CATSTATS([catname or mask or blank])   => Lists the I/O statistics and BUFNI, BUFND, and STRNO for specified catalogs that are active in the catalog address space.
F CATALOG,REPORT,CATSTATX([catname or mask])   => lists the same I/O statistics and settings that are produced by CATSTATS. It also provides CA-Reclaim and CA-Reuse statistics. Output is in the form of a table for each selected catalog.
F CATALOG,REPORT,CACHE    => Displays the catalog cache information (including cache hit percentage)
F CATALOG,LIST      => List catalog task(s)
F CATALOG,ENTRY 
F CATALOG,NOISC(CAT)  => Disable an ICF catalog from default caching
F CATALOG,ECSHR(STATUS)  => Causes the status of each catalog that has been referenced since the last IPL to be displayed
F CATALOG,ECSHR(AUTOADD) => Indicates whether ECS-eligible catalogs should be automatically added to the ECS structure.
F CATALOG,CONTENTION  => Displays the Catalog resources for which contention detection is available (ALLOCLCK, SYSIGGV2, SYSZTIOT, and SYSZVVDS)
F CATALOG,RECOVER,LOCK([UCAT])
F CATALOG,RECOVER,UNLOCK([UCAT])
F CATALOG,RECOVER,SUSPEND([UCAT])
F CATALOG,RECOVER,RESUME([UCAT])
F CATALOG,VLF || F CATALOG,ISC   => Are VLF or ISC active?
F CATALOG,CATMAX(nnnn)     => Specifies the maximum number of catalogs that can be opened concurrently in CAS
F CATALOG,TASKMAX(nnn)     => Specifies the maximum number of CAS service tasks that are attached to process (non-CAS) catalog requests 
F CATALOG,VVDSSPACE(primary,secondary)  => Indicates that the Catalog Address Space should use the values specified as the primary and secondary allocation amount in tracks for an implicitly defined VVDS
F CATALOG,RESTART   => Specifies that CAS is to be restarted in a new address space

D T           => Displat time and date
D ETR         => Display the status of STP or the Sysplex Timer
D CF

D ASM         => Display usage of the Auxiliary Storage Manager
D ASM,PAGE=ALL

D OMVS
D OMVS,F          => Display mounted file systems and associated mount points
D OMVS,FILE
D OMVS,FILE,O
D OMVS,FILE,N=OMVSSPA.*
D OMVS,FILE,T=ZFS
D OMVS,L
D OMVS,A=ALL      => Display all active OMVS processes
D OMVS,PID=nnnn   => Display the status of an individual process and threads running under that process
D OMVS,OPTIONS
D OMVS,PFS        => Display Physical File System information
D OMVS,MF         => Display the 10 most recent mount failures
D OMVS,U=[userid]
D OMVS,MF         => Display information about move or mount failures
MODIFY OMVS,SHUTDOWN  => Stops z/OS UNIX processes
MODIFY OMVS,RESTART   => Restarts and reinitializes the z/OS UNIX environment
SETOMVS SYNTAXCHECK=(xx)
SETOMVS FILESYS,FILESYSTEM='POSIX.PAYROLL.ZFS',SYSNAME=SY2  => To move ownership of the file system from the current owner 
SETOMVS FILESYS,mountpoint='/PAYROLL',SYSNAME=SY2 
SET OMVS=FS

MODIFY BPXOINIT,FILESYS=DISPLAY       => Display the system information that is in the OMVS CDS
MODIFY BPXOINIT,FILESYS=DISPLAY,ALL   => Display file system information in CDS
F BPXOINIT,SHUTDOWN=FILESYS           => To unmount all active file systems
F BPXOINIT,SHUTDOWN=FORKINIT
F BPXOINIT,TERM=[pid]
F BPXOINIT,FORCE=[pid]
F BPXOINIT,RECOVER=LATCHES

F ZFS,FSINFO,ALL
F ZFS,QUERY,STATUS
F ZFS,QUERY,SETTINGS    => Display all the current settings of the zFS kernel
F ZFS,QUERY,LEVEL       => Display the value of the SYSPLEX setting currently in use for zFS (SYSPLEX_FILESYS_SHAREMODE)
F ZFS,QUERY,FILE        => Indicates if zFS RW sysplex sharing is being used for the file system.
F ZFS,STOPPFS=ZFS    

D GRS
D GRS,C       => Display GRS contention information
D GRS,CONTENTION,LATCH
D GRS,ANALYZE,BLOCKER    => Provides a list of the requesters that have been blocking ENQ resources
D GRS,ANALYZE,WAITER     => Provides a list of requesters that have been waiting
D GRS,ANALYZE,DEPENDENCY
D GRS,ANALYZE,DEPENDENCY,DETAIL
D GRS,RNL=INCL           => Shows the contents of the SYSTEM inclusion RNL
D GRS,RNL=EXCL           => Shows the contents of the SYSTEMS exclusion RNL
D GRS,RNL=CON            => Shows the contents of reserve conversion RNL
D GRS,RES=(SYSDSN,SYS1.LINKLIB)
D GRS,DEV=[device address]      => Shows whether a specified device is RESERVEd by the system
 
$D ACTIVATE
$D SPL
$D SPL,LONG
$D SPOOLDEF 
$D CKPTDEF 
$D CKPTSPACE
$T CKPTDEF,NEWCKPT1=(STRNAME=[JES2strname])
$T CKPTDEF,NEWCKPT1=(DSN=dsname,VOL=volser),
           NEWCKPT2=(DSN=dsname,VOL=volser)
$T CKPTDEF,RECONFIG=YES	 =>  Initiate JES2 checkpoint reconfiguration dialog.
$T SPOOLDEF,…
$T SPOOLDEF,TGSPACE=(MAX=nnnnnn)
$S SPL(volser)
$S SPL(volser),FORMAT,RESERVED=YES,SPACE=(MAX)
$T SPOOL(volser),RESERVED=NO
$M SPOOL(volser),TARGET=target
$DJQ,SPL=(V=volser),STATUS
$D SPOOL,MIGDATA      => Display all volumes having contiguous free space
$D INITINFO
$D MEMBER
$D OUTCLASS
$JDSTATUS            
$JDMONITOR
$CJ(xxx)
$CJ(xxx),P
$TA,ALL             => Display the automatic commands currently in effect
$TA,T=15.45,'$VS,''D A'''    => Specify a new command or series of commands for automatic processing
$CA[id]             => Cancel automatic commands

S JES2,PARM=(CHECK),SYSOUT=A,SUB=JES2

D PROD,STATE
D PROD,REGISTERED
SET PROD=xx
T PROD=xx

D NET,MAJNOODES
D NET,E,ID=[id]
D NET,TRL
V NET,ACT,ID=[id]
V NET,ACT,UPDATE=ALL,ID=[id]
Z NET,QUICK
Z NET,CANCEL

D TCPIP
D TCPIP,,NETSTAT,HOME
V TCPIP,,OBEYFILE
V TCPIP,,O,DSN=SYS1.TCPPARMS(PROFNAME)
V TCPIP,,OSAINFO
V TCPIP,,SYNTAXCHECK

D SLIP=[slipid]
D SLIP
SET SLIP=xx

D SSI
D SSI,SUB=LOGR

RO *ALL,[command]    => Route commands to all systems in the sysplex
RO *OTHER,[]
RO sysname,[command]

SET IKJTSO=xx

F TSO,USERMAX=1
F TCAS,USERMAX=#

C U=[userid]

SETLOAD xx,PARMLIB,DSN=SYS1.IPLPARM,VOL=volser
SETLOAD xx,IEASYM,DSN=SYS1.IPLPARM,VOL=volser