Flash with static/predefined region/channels/etc what is the std way?

[mariotti]

Hi all,

So given the title question: how can I flash with presets?

I see the the files:

userPrefs.json

and

userPrefs.h

But they look like more as a demo and not an actual file loaded while flashing.
The values are actually not loaded if I flash directly from the checkedout branch.

Is there a way to achieve this?

Of course the requirement would be that any serial client cannot overwrite
the presets.

Btw, I start to have a lot of fun with meshtastic! Thanks!
A+
F

[fifieldt]

These files are baked in to the firmware when it is built. Are you comfortable building your own firmware?

[mariotti]

Ok! One option I will try is to flash via the web interface with the erase before flashing option, just to test I am right. But would not be the best process.

[fifieldt]

Right, so the userprefs.h won't override settings that have been explicitly specified by the user. Think of it more of something an "OEM" would use.

To attain a device where users can't modify settings, you'd need to alter nodedb.cpp

[mariotti]

As I see it I also would need the Channels.cpp

But actually both will not grant to override the existing device settings. Nor that a client cannot change the settings.

But let me experiment a bit. I will be back here.

I have the additional issue that flashing takes time and my t-echo seems a bit odd with flashing,
same process, works depending on some other random parameters :(

[mariotti]

Some though.

I had a look at the code and it looks like that while the userPrefs.h is loaded you still need a clean/flash process.
Which I cannot do right now on the t-echo because it has an odd flashing process. I will try on a different device.

On the other side using the userPrefs.h works to set the initial values but if you want to make them static at
present you would need to work with the AdminModule.cpp which apparently is the only one applying changes.

Here I still need to find the best way, which probably is using the predefined process.

PS:
On the t-echo I tried also the command line "meshtastic" with: meshtastic --factory-reset-device
but the result was to hop in a previous configuration. Whatever I had there before.

[mariotti]

I found a path to follow.

• Write your own userPrefs.h
• build
• flash with "erase" if possible
• set up the remote admin

What I do not know is how to send admin messages, yet :(

But this should give:

• You have a preconfigured device
• Only admin can change settings

This should be grant by this line:

https://github.com/meshtastic/firmware/blob/master/src/modules/AdminModule.cpp#L79

i.e. you can have a managed device.

The part I am missing is how to send admin messages.

cheers
F