Voltage Level

Create Voltage Level

To create a new VoltageLevel element within a Substation element, follow these steps:

• Navigate to the Substation editor
• Select the Substation where you intend to add the voltage level.
• Click on the Add mode button located in the upper right corner of the Substation pane.
• Complete all required fields.
• Click on the Add button.

The creation wizard allows you to configure the following parameters:

• name: a unique identifier for the voltage level within the parent substation.
• desc: a human-readable description.
• nomFreq: the nominal frequency of the voltage level (e.g. 50Hz/60Hz/16.6Hz).
• numPhases: the number of phases.
• Voltage: the voltage of the voltage level (combination of value and multiplier).

Edit Voltage Level

To edit a VoltageLevel element, follow these steps:

• Navigate to the Substation editor.
• Select the VoltageLevel you wish to edit.
• Click on the edit button.
• Make the necessary changes and click Save.

The VoltageLevel element has four attributes:

• name: a unique identifier for the voltage level within the parent substation.
• desc: a human-readable description.
• nomFreq: the nominal frequency of the voltage level (e.g. 50Hz/60Hz/16.6Hz).
• numPhases: the number of phases.

The Voltage setting is used to edit the Voltage element, which is structured as follows:

<Voltage multiplier="k" unit="V">110</Voltage>

In the wizard, you have the option to set the multiplier and the value (110), with the unit fixed to V.

Remove Voltage Level

To remove an existing VoltageLevel element within the parent Substation

• Navigate to the Substation editor.
• Select the Voltage Level you wish to remove.
• Click on the delete button.