See the original forum thread for comments.
You need a garage door with Hormann Supramatic 2/3 Buy yourself a Hormann UAP1. I've bought mine here
The UAP enables you to
- control the light of the supramatic
- open the garage door
- close the garage door
- stop the garage door (Not needed on seperate output for me)
- check whether the door is totally closed or totally open, you don't get an exact position
- light status? (not tried that one)
Find your serial number of your Supramatic. Mine was a D version.
Wiring of version D is not the same as for version a, b or c. Check out the included "schaltplan" and wire.
I've wired 01 (0.5 & 0.8) status door open and 02 (0.5 & 0.8) status door closed to digital inputs of my Loxone and contacts 10 (light),17 (close door),15 (open door),23 (stop door) to digital outputs.
Open your loxone config and configure.
I've used the gate block to open/close the door
Connect the buttons you would like to use to Io and Ic
Connect 15 to Qo Connect 17 to Qc
Status of the door and lighting control of the door is nothing special. When I tried that I needed to press two to stop the gate (or open it or close it)
I found out it had to do with the Td time, so I changed the time to 0.5 second or something like that.
This has some drawbacks, like the animation of the door on my android app that closes/opens too quick but I haven't looked in depth to look for another solution.
Pushing input button lo opens the gate, pushing it again stops the gate same for button lc for closing
That should be it, hormann remote sender still works as well without a hassle for me.