Skip to content

Latest commit

 

History

History
294 lines (246 loc) · 11.4 KB

CHANGELOG.md

File metadata and controls

294 lines (246 loc) · 11.4 KB
Raw

Change log

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

UNRELEASED

Added

Changed

Fixed

Removed

4.0.1 - 2020-04-17

Added

Changed

  • Update maintenance status to looking for a new maintainer.

Fixed

  • Properly initialize DCB structure on Windows. This fixes some non-functional devices. !97

Removed

4.0.0 - 2020-12-17

Added

  • Added send_break() to TTYPort !69
  • Enable available_ports() for Linux musl targets and those without the libudev feature enabled by scanning /sys/ for ports. !72
  • ENOENT and EACCES errors are now exposed as NotFound and PermissionDenied errors on Linux !80
  • try_clone_native() was added to COMPort and TTYPort to complement SerialPort::try_clone() but returning the concrete type instead. !85
  • Added set_break() and clear_break() to SerialPort !70

Changed

  • Minimum supported Rust version is now 1.36.0 to support the mem::MaybeUninit feature.
  • The platform-specific TTYPort/BreakDuration and COMPort are now at the root level rather than under the posix and windows submodules respectively.
  • Opening SerialPort s now uses the builder pattern through serialport::new(). See the README for concrete examples. !73
  • SerialPorts s are no longer opened with a default timeout of 1ms
  • Under linux, the manufacturer and product fields of UsbPortInfo now take their values from the ID_VENDOR_FROM_DATABASE and ID_MODEL_FROM_DATABASE udev properties respectively, instead of the ID_VENDOR and ID_MODEL properties that were used before. When the _FROM_DATABASE values are not available, it falls back to the old behavior. !86
  • POSIX ports are no longer opened in exclusive mode. After opening they can be made exclusive via TTYPort::set_exclusive(). !98

Fixed

  • Raised the version specification for bitflags to 1.0.4. Previously it was set to 1.0.0, but this version of bitflags is actually incompatible with Rust 2018 style macro imports that serialport-rs requires. !83

Removed

  • Removed the serialport::prelude module. Types should be explicitly imported or can be glob-imported from the root like use serialport::*. !82

3.3.0 - 2019-06-12

Added

  • Added support for arbitrary baud rates on Mac OS X and iOS

Changed

  • Minimum supported Rust version is now 1.31 to support using the 2018 edition of Rust.

Fixed

  • Upgraded sparc64-unknown-linux-gnu to Tier 2 support

Removed

3.2.0 - 2019-01-01

Added

  • Port enumeration is now supported on FreeBSD.

Changed

  • Minimum supported Rust version changed to 1.24.1
  • Made aarch64-unknown-linux-musl a Tier-2 supported target

Fixed

  • Fixed software flow control for POSIX systems (!54)

Removed

  • Removed support for x86_64-unknown-linux-gnux32.

3.1.0 - 2018-11-02

Added

  • Added bytes_to_read(), bytes_to_write(), and clear() to SerialPort. Also added example scripts for using them.
  • Added Tier 2 support for:
    • armv5te-unknown-linux-musleabi
  • Added "libudev" feature to allow for disabling linking to libudev on Linux.

3.0.0 - 2018-07-14

Added

  • Arbitrary baud rates are now supported on BSDs, Linux, and Windows.
  • Added Tier 1 support for {i586|i686|x86_64}-unknown-linux-musl
  • Added Tier 2 support for:
    • {arm|armv7}-linux-androideabi
    • i686-linux-android
    • {i686|x86_64}-unknown-freebsd
    • arm-unknown-linux-musleabi
    • armv7-unknown-linux-musleabihf
    • {mips64|mips64el}-unknown-linux-gnuabi64
    • armv5te-unknown-linux-gnueabi
    • {aarch64|mips|mipsel|powerpc64|powerpc64le|powerpc|s390x}-unknown-linux-gnu
    • {mips|mipsel}-unknown-linux-musl
    • x86_64-unknown-netbsd
  • Added Tier 3 support for:
    • {aarch64|x86_64}-linux-android
    • aarch64-unknown-linux-musl
    • sparc64-unknown-linux-gnu,
    • x86_64-unknown-linux-gnux32

Changed

  • Most port configuration methods now return a Result<()>.
  • Renamed SerialPort::port_name() to name().

Fixed

  • On Windows, the port_name field on SerialPortInfo included an extraneous trailing nul byte character.

Removed

  • The BaudRate enum was removed in favor of a u32.

2.3.0 - 2018-03-13

Added

  • Added examples/hardware_check.rs for use in debugging library or driver issues when using physical serial ports.
  • Added SerialPort::try_clone which allows for cloning a port for full-duplex reading and writing.

Changed

  • Removed configuration caching for serial ports. The underlying implementations for all platforms cached a configuration struct so that modifying the port settings involved a single switch into kernel space. This has been removed so now two system calls are needed for every configuration change. This is probably a slight performance regression, but should allow the new SerialPort::try_clone interface to work as people expect.

Fixed

  • TTYPort::into_raw_fd will now work as expected. It previously closed the port so the returned file descriptor would be invalid.
  • 921600 baud is now supported on NetBSD and FreeBSD.

2.2.0 - 2018-03-13

Unreleased, happened due to a user error using cargo-release

2.1.0 - 2018-02-14

Added

  • impl FromRawHandle for COMPort

Changed

  • Specific IO-related errors are now returned instead of mapping every IO error to Unknown. This makes it possible to catch things like time-out errors.
  • Changed all baud rates to be reported as the discrete BaudRate::Baud* types rather than as the BaudRate::BaudOther(*) type.

Fixed

  • Modem-type USB serial devices are now enumerated on OS X. This now allows connected Arduinos to be detected.
  • Compilation on FreeBSD and NetBSD was fixed by removing the 921600 baud rates. These will be re-added in a future release.

2.0.0 - 2017-12-18

Added

  • USB device information is now returned in calls to available_ports()
  • Serial port enumeration is now supported on Mac
  • Serial port enumeration now attempts to return the interface used for the port (USB, PCI, Bluetooth, Unknown).
  • BaudRate::standard_rates() provides a vector of cross-platform baud rates.
  • SerialPort trait is now Send

Changed

  • Software license has changed from LGPLv3+ to MPL-2.0. This makes it possible to use this library in any Rust project if it's unmodified.
  • Mac is now a Tier 2 supported platform
  • Removed BaudRate::from_speed(usize) and BaudRate::speed -> usize in favor of the From<u32> and Into<u32> traits.
  • Removed available_baud_rates in favor of BaudRate::platform_rates() as this has a more clear semantic meaning. The returned list of baud rates is now also correct for all supported platforms.
  • Removed termios dependency in favor of nix. This is a big step towards supporting additional platforms.

Fixed

  • Stop bits are now specified properly (had been reversed). Thanks to @serviushack (MR#9)
  • TTYPort::pair() is now thread-safe.
  • TTYPort::open() no longer leaks file descriptors if it errors. Thanks to @daniel (MR#12)
  • Fixed compilation when targeting Android

1.0.1 - 2017-02-20

Fixed

  • read() now properly blocks for at least one character
  • Compilation now works on Mac

1.0.0 - 2017-02-13

Changed

  • Various documentation/README updates
  • Minor formatting fixes (from rustfmt)

Fixed

  • Platform-specific examples are now only built on appropriate platforms

0.9.0 - 2017-02-09

Added

  • impl Debug for COMPort
  • exclusive() and set_exclusive() for TTYPort
  • port_name() for SerialPort
  • impl FromRawFd and impl IntoRawFd for TTYPort
  • pair() for TTYPort

0.3.0 - 2017-01-28

Added

  • open_with_settings() to support initializing the port with custom settings
  • SerialPortSettings is now publically usable being exported in the prelude, having all public and commented fields, and a Default impl.

Changed

  • TTYPort/COMPort::open() now take a SerialPortSettings argument and return concrete types
  • serialport::open() now initializes the port to reasonable defaults
  • Removed all instances of try!() for ?
  • SerialPort::set_all() now borrows SerialPortSettings

0.2.4 - 2017-01-26

Added

  • Report an Unimplemented error for unsupported unix targets

Changed

  • Minor changes suggested by Clippy
  • Reworked Cargo.toml to more easily support additional targets

Fixed

  • AppVeyor badge should now be properly displayed

0.2.3 - 2017-01-21

Added

  • Specify AppVeyor build status badge for crates.io

0.2.2 - 2017-01-21

  • No changes, purely a version increment to push new crate metadata to crates.io

0.2.1 - 2017-01-21

Added

  • Specify category for crates.io

0.2.0 - 2017-01-07

Added

  • Added a changelog
  • Added a getter/setter pair for all settings at once
  • An error is thrown if settings weren't correctly applied on POSIX

0.1.1 - 2016-12-23

Changed

  • Fixed compilation on x86_64-pc-windows-gnu target
  • Added contributors to README
  • Clarified license terms in the README

0.1.0 - 2016-12-22

Added

  • Initial release.