crowdsale100-1.sol

0x8cc4956482e2781E19c/**
 *Submitted for verification at polygonscan.com on 2021-06-11
*/

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v2.5.1/contracts/utils/ReentrancyGuard.sol

pragma solidity ^0.5.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 *
 * _Since v2.5.0:_ this module is now much more gas efficient, given net gas
 * metering changes introduced in the Istanbul hardfork.
 */
contract ReentrancyGuard {
    bool private _notEntered;

    constructor () internal {
        // Storing an initial non-zero value makes deployment a bit more
        // expensive, but in exchange the refund on every call to nonReentrant
        // will be lower in amount. Since refunds are capped to a percetange of
        // the total transaction's gas, it is best to keep them low in cases
        // like this one, to increase the likelihood of the full refund coming
        // into effect.
        _notEntered = true;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_notEntered, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _notEntered = false;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _notEntered = true;
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v2.5.1/contracts/utils/Address.sol

pragma solidity ^0.5.5;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following 
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Converts an `address` into `address payable`. Note that this is
     * simply a type cast: the actual underlying value is not changed.
     *
     * _Available since v2.4.0._
     */
    function toPayable(address account) internal pure returns (address payable) {
        return address(uint160(account));
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     *
     * _Available since v2.4.0._
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-call-value
        (bool success, ) = recipient.call.value(amount)("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v2.5.1/contracts/token/ERC20/SafeERC20.sol

pragma solidity ^0.5.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves.

        // A Solidity high level call has three parts:
        //  1. The target address is checked to verify it contains contract code
        //  2. The call itself is made, and success asserted
        //  3. The return value is decoded, which in turn checks the size of the returned data.
        // solhint-disable-next-line max-line-length
        //require(address(token).isContract(), "SafeERC20: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        //(bool success, bytes memory returndata) = address(token).call(data);
       
        
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v2.5.1/contracts/math/SafeMath.sol

pragma solidity ^0.5.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     *
     * _Available since v2.4.0._
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v2.5.1/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.5.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP. Does not include
 * the optional functions; to access them see {ERC20Detailed}.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v2.5.1/contracts/GSN/Context.sol

pragma solidity ^0.5.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
contract Context {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.
    constructor () internal { }
    // solhint-disable-previous-line no-empty-blocks

    function _msgSender() internal view returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v2.5.1/contracts/crowdsale/Crowdsale.sol

pragma solidity ^0.5.0;






/**
 * @title Crowdsale
 * @dev Crowdsale is a base contract for managing a token crowdsale,
 * allowing investors to purchase tokens with ether. This contract implements
 * such functionality in its most fundamental form and can be extended to provide additional
 * functionality and/or custom behavior.
 * The external interface represents the basic interface for purchasing tokens, and conforms
 * the base architecture for crowdsales. It is *not* intended to be modified / overridden.
 * The internal interface conforms the extensible and modifiable surface of crowdsales. Override
 * the methods to add functionality. Consider using 'super' where appropriate to concatenate
 * behavior.
 */
contract Crowdsale is Context, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // The token being sold
    IERC20 private _token;

    // Address where funds are collected
    address payable private _wallet;

    // How many token units a buyer gets per wei.
    // The rate is the conversion between wei and the smallest and indivisible token unit.
    // So, if you are using a rate of 1 with a ERC20Detailed token with 3 decimals called TOK
    // 1 wei will give you 1 unit, or 0.001 TOK.
    uint256 private _rate;

    // Amount of wei raised
    uint256 private _weiRaised;

    /**
     * Event for token purchase logging
     * @param purchaser who paid for the tokens
     * @param beneficiary who got the tokens
     * @param value weis paid for purchase
     * @param amount amount of tokens purchased
     */
    event TokensPurchased(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);

    /**
     * @param rate Number of token units a buyer gets per wei
     * @dev The rate is the conversion between wei and the smallest and indivisible
     * token unit. So, if you are using a rate of 1 with a ERC20Detailed token
     * with 3 decimals called TOK, 1 wei will give you 1 unit, or 0.001 TOK.
     * @param wallet Address where collected funds will be forwarded to
     * @param token Address of the token being sold
     */
    constructor (uint256 rate, address payable wallet, IERC20 token) public {
        require(rate > 0, "Crowdsale: rate is 0");
        require(wallet != address(0), "Crowdsale: wallet is the zero address");
        require(address(token) != address(0), "Crowdsale: token is the zero address");

        _rate = rate;
        _wallet = wallet;
        _token = token;
    }

    /**
     * @dev fallback function ***DO NOT OVERRIDE***
     * Note that other contracts will transfer funds with a base gas stipend
     * of 2300, which is not enough to call buyTokens. Consider calling
     * buyTokens directly when purchasing tokens from a contract.
     */
    function () external payable {
        buyTokens(_msgSender());
    }

    /**
     * @return the token being sold.
     */
    function token() public view returns (IERC20) {
        return _token;
    }

    /**
     * @return the address where funds are collected.
     */
    function wallet() public view returns (address payable) {
        return _wallet;
    }

    /**
     * @return the number of token units a buyer gets per wei.
     */
    function rate() public view returns (uint256) {
        return _rate;
    }

    /**
     * @return the amount of wei raised.
     */
    function weiRaised() public view returns (uint256) {
        return _weiRaised;
    }

    /**
     * @dev low level token purchase ***DO NOT OVERRIDE***
     * This function has a non-reentrancy guard, so it shouldn't be called by
     * another `nonReentrant` function.
     * @param beneficiary Recipient of the token purchase
     */
    function buyTokens(address beneficiary) public nonReentrant payable {
        uint256 weiAmount = msg.value;
        _preValidatePurchase(beneficiary, weiAmount);

        // calculate token amount to be created
        uint256 tokens = _getTokenAmount(weiAmount);

        // update state
        _weiRaised = _weiRaised.add(weiAmount);

        _processPurchase(beneficiary, tokens);
        emit TokensPurchased(_msgSender(), beneficiary, weiAmount, tokens);

        _updatePurchasingState(beneficiary, weiAmount);

        _forwardFunds();
        _postValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met.
     * Use `super` in contracts that inherit from Crowdsale to extend their validations.
     * Example from CappedCrowdsale.sol's _preValidatePurchase method:
     *     super._preValidatePurchase(beneficiary, weiAmount);
     *     require(weiRaised().add(weiAmount) <= cap);
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        require(beneficiary != address(0), "Crowdsale: beneficiary is the zero address");
        require(weiAmount != 0, "Crowdsale: weiAmount is 0");
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    }

    /**
     * @dev Validation of an executed purchase. Observe state and use revert statements to undo rollback when valid
     * conditions are not met.
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _postValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends
     * its tokens.
     * @param beneficiary Address performing the token purchase
     * @param tokenAmount Number of tokens to be emitted
     */
    function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
        _token.safeTransfer(beneficiary, tokenAmount);
    }

    /**
     * @dev Executed when a purchase has been validated and is ready to be executed. Doesn't necessarily emit/send
     * tokens.
     * @param beneficiary Address receiving the tokens
     * @param tokenAmount Number of tokens to be purchased
     */
    function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
        _deliverTokens(beneficiary, tokenAmount);
    }
 
    /**
     * @dev Override for extensions that require an internal state to check for validity (current user contributions,
     * etc.)
     * @param beneficiary Address receiving the tokens
     * @param weiAmount Value in wei involved in the purchase
     */
    function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Override to extend the way in which ether is converted to tokens.
     * @param weiAmount Value in wei to be converted into tokens
     * @return Number of tokens that can be purchased with the specified _weiAmount
     */
    function _getTokenAmount(uint256 weiAmount) internal view returns (uint256) {
        return weiAmount.mul(_rate);
    }

    /**
     * @dev Determines how ETH is stored/forwarded on purchases.
     */
    function _forwardFunds() internal {
        _wallet.transfer(msg.value);
    }
}

// File: vender.sol

pragma solidity ^0.5.0;


/**
 * @title SimpleCrowdsale
 * @dev This is an example of a fully fledged crowdsale.
 */
contract SimpleCrowdsale is Crowdsale {
    constructor (
        uint256 rate,
        address payable wallet,
        IERC20 token
    )
        public
        Crowdsale(rate, wallet, token)
    {
    }
}