Controlling of 32x32 or 16x32 RGB LED displays using Raspberry Pi rpi-rgb-led-matrix with Art-Net and sACN E1.31
Art-Net is a protocol for controlling lights over a network. Glediator / Jinx controls LEDs on one or more Art-Net nodes. An Art-Net node drives the LEDs. In this example, Glediator / Jinx runs on a laptop and controls a Pi with a rpi-rgb-led-matrix RGB LED displays using Raspberry Pi. The Pi is the Art-Net node. A RGB LED displays 32x32 / 32x16 / 64x64 is an add-on board connected for a Raspberry Pi+/3
Also Read https://github.com/bbx10/artnet-unicorn-hat for more information.
http://www.solderlab.de/index.php/software/glediator
https://en.wikipedia.org/wiki/Art-Net
Controlling up to 64x64 and more RGB LED Matrix Display with sACN E1.31 Protocol have a look https://github.com/darknessii/rpi-matrix-acn-e1-31
RGB LED displays rpi-rgb-led-matrix Program for Raspberry Pi must be installed and working on the Pi supplied Python software. Make sure this works before graduating to Art-Net.
https://github.com/hzeller/rpi-rgb-led-matrix
or
https://github.com/darknessii/rpi-rgb-led-matrix
Do this only once to install the Python twisted libraries.
sudo apt-get install python-twisted
The following command runs the Art-Net server turning the Pi into an Art-Net node. Many programs can send LED values to an Art-Net node. Glediator and Jinx is such a program.
sudo python rpi-matrix-artnet.py
- Art-Net (Net Support)
- no Multicast Support
- Buffer optimieren
Jinx! – LED Matrix Control
Jinx!, is a free available software for controlling LED matrices.
See the Glediator download page to download and install Glediator.
xLights is a free and open source program that enables you to design, create and play amazing lighting displays through the use of DMX controllers, E1.31 Ethernet controllers and more.