Merge pull request #19763 from Ultimaker/PP-533-Small-corrections-for…

…-5.9-Stable Small corrections for 5.9 Stable
Ultimaker · Oct 21, 2024 · b98744c · b98744c
2 parents d9cfd7f + d7d25d0
commit b98744c
Show file tree

Hide file tree

Showing 26 changed files with 50 additions and 45 deletions.
diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json
@@ -343,6 +343,7 @@
         "multiple_mesh_overlap": { "value": 0 },
         "optimize_wall_printing_order": { "value": true },
         "prime_blob_enable": { "enabled": false },
+        "prime_tower_enable": { "default_value": true },
         "prime_tower_flow": { "value": "material_flow" },
         "prime_tower_line_width":
         {

diff --git a/resources/definitions/ultimaker_sketch.def.json b/resources/definitions/ultimaker_sketch.def.json
@@ -126,8 +126,23 @@
         "machine_nozzle_heat_up_speed": { "default_value": 1.4 },
         "machine_start_gcode": { "default_value": "M140 S50 T0; Set Platform Temp\nM104 S220 T0; Set Extruder Temp\nG90; Use Absolute Positioning\nG28; Home\nM132 X Y Z A B; Set Current Position to Home\nG161 X Y F3300; Move to min axes positions\nM7 T0; Wait For Platform to Heat\nM6 T0; Wait For Extruders to Heat\nM651; Turn on back fan\nM907 X100 Y100 Z40 A80 B20; Set Stepper Currents\nM106; Enable Cooling Fan\n; Purge Line\nG92 E0; Reset Extruder Axis Position\nG1 X-26.18 Y-75.90 Z0.200 F420\nG1 X26.18 Y-75.90 E10\nG92 E0; Reset Extruder Axis Position\n; Start GCode\n" },
         "machine_width": { "default_value": 150 },
+        "material_bed_temperature":
+        {
+            "maximum_value": 100,
+            "maximum_value_warning": 70
+        },
+        "material_bed_temperature_layer_0":
+        {
+            "maximum_value": 100,
+            "maximum_value_warning": 70
+        },
         "material_diameter": { "default_value": 1.75 },
         "material_flow": { "default_value": 100 },
+        "material_print_temperature":
+        {
+            "maximum_value": 240,
+            "maximum_value_warning": 230
+        },
         "min_bead_width":
         {
             "minimum_value": "line_width * 0.5",
@@ -148,6 +163,7 @@
             "enabled": true,
             "value": "resolveOrValue('print_sequence') != 'one_at_a_time'"
         },
+        "print_sequence": { "enabled": false },
         "raft_margin": { "value": "5" },
         "retract_at_layer_change": { "value": true },
         "retraction_amount":

diff --git a/resources/definitions/ultimaker_sketch_sprint.def.json b/resources/definitions/ultimaker_sketch_sprint.def.json
@@ -171,11 +171,12 @@
         "material_flow": { "default_value": 100 },
         "material_print_temperature":
         {
-            "maximum_value": 280,
+            "maximum_value": 260,
             "maximum_value_warning": 240
         },
         "min_bead_width": { "value": 0.3 },
         "multiple_mesh_overlap": { "value": "0" },
+        "print_sequence": { "enabled": false },
         "raft_airgap": { "value": 0.35 },
         "raft_base_acceleration": { "value": "acceleration_layer_0" },
         "raft_base_speed":

diff --git a/resources/quality/ultimaker_method/um_method_1a_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-petg-175_0.2mm.inst.cfg
@@ -36,7 +36,6 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 40
-raft_surface_wall_count = 2
 skin_overlap = 10
 speed_layer_0 = 15
 speed_print = 60

diff --git a/resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm.inst.cfg
@@ -56,16 +56,14 @@ support_bottom_enable = False
 support_infill_angles = [45 ]
 support_infill_rate = 12
 support_interface_density = 75
-support_interface_height = =layer_height * 4
-support_interface_material_flow = =material_flow * 0.9
+support_interface_material_flow = =support_material_flow
 support_interface_offset = 0.8
 support_interface_pattern = zigzag
 support_line_width = =line_width * 0.75
 support_material_flow = =material_flow * 0.9
 support_offset = 1
 support_pattern = zigzag
 support_roof_density = =support_interface_density
-support_roof_height = =layer_height * 4
 support_roof_line_width = =line_width
 support_top_distance = =support_z_distance
 support_xy_distance = 0.35

diff --git a/resources/quality/ultimaker_method/um_method_1c_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-petg-175_0.2mm.inst.cfg
@@ -36,7 +36,6 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 40
-raft_surface_wall_count = 2
 skin_overlap = 10
 speed_layer_0 = 15
 speed_print = 60

diff --git a/resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm.inst.cfg
@@ -56,16 +56,14 @@ support_bottom_enable = False
 support_infill_angles = [45 ]
 support_infill_rate = 12
 support_interface_density = 75
-support_interface_height = =layer_height * 4
-support_interface_material_flow = =material_flow * 0.9
+support_interface_material_flow = =support_material_flow
 support_interface_offset = 0.8
 support_interface_pattern = zigzag
 support_line_width = =line_width * 0.75
 support_material_flow = =material_flow * 0.9
 support_offset = 1
 support_pattern = zigzag
 support_roof_density = =support_interface_density
-support_roof_height = =layer_height * 4
 support_roof_line_width = =line_width
 support_top_distance = =support_z_distance
 support_xy_distance = 0.35

diff --git a/resources/quality/ultimaker_method/um_method_labs_basf-ultrafuse-316l-175_0.15mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_basf-ultrafuse-316l-175_0.15mm.inst.cfg
@@ -23,15 +23,13 @@ initial_layer_line_width_factor = 110
 layer_height_0 = =layer_height * 1.5
 material_flow_layer_0 = 110
 material_initial_print_temperature = 245
-retraction_amount = 1.5
-retraction_speed = 45
+retraction_amount = 0.75
+retraction_speed = 5
 roofing_line_width = 0.4
 skin_line_width = 0.45
 skin_material_flow_layer_0 = 110
 skin_overlap = 20.0
-skirt_brim_line_width = 1
 skirt_brim_minimal_length = 100.0
-skirt_height = 3
 speed_print = 25
 support_enable = False
 top_bottom_thickness = =layer_height * 2

diff --git a/resources/quality/ultimaker_method/um_method_labs_jabil-tpe-sebs-1300-95a-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_jabil-tpe-sebs-1300-95a-175_0.2mm.inst.cfg
@@ -15,8 +15,14 @@ weight = -2
 [values]
 infill_sparse_density = 50
 raft_airgap = 0.22
+raft_interface_flow = 110
+raft_interface_infill_overlap = 25
 raft_interface_speed = =speed_print * 1/2
+raft_interface_z_offset = -0.1
+raft_surface_flow = 110
+raft_surface_infill_overlap = 50
 raft_surface_speed = =speed_print * 1/2
+raft_surface_z_offset = -0.075
 speed_layer_0 = =speed_print * 1/4
 speed_prime_tower = =speed_print * 3/4
 speed_print = 40

diff --git a/resources/quality/ultimaker_method/um_method_labs_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-petg-175_0.2mm.inst.cfg
@@ -36,7 +36,6 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 40
-raft_surface_wall_count = 2
 skin_overlap = 10
 speed_layer_0 = 15
 speed_print = 60

diff --git a/resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm.inst.cfg
@@ -56,16 +56,14 @@ support_bottom_enable = False
 support_infill_angles = [45 ]
 support_infill_rate = 12
 support_interface_density = 75
-support_interface_height = =layer_height * 4
-support_interface_material_flow = =material_flow * 0.9
+support_interface_material_flow = =support_material_flow
 support_interface_offset = 0.8
 support_interface_pattern = zigzag
 support_line_width = =line_width * 0.75
 support_material_flow = =material_flow * 0.9
 support_offset = 1
 support_pattern = zigzag
 support_roof_density = =support_interface_density
-support_roof_height = =layer_height * 4
 support_roof_line_width = =line_width
 support_top_distance = =support_z_distance
 support_xy_distance = 0.35

diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-petg-175_0.2mm.inst.cfg
@@ -36,7 +36,6 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 40
-raft_surface_wall_count = 2
 skin_overlap = 10
 speed_layer_0 = 15
 speed_print = 60

diff --git a/resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm.inst.cfg
@@ -56,16 +56,14 @@ support_bottom_enable = False
 support_infill_angles = [45 ]
 support_infill_rate = 12
 support_interface_density = 75
-support_interface_height = =layer_height * 4
-support_interface_material_flow = =material_flow * 0.9
+support_interface_material_flow = =support_material_flow
 support_interface_offset = 0.8
 support_interface_pattern = zigzag
 support_line_width = =line_width * 0.75
 support_material_flow = =material_flow * 0.9
 support_offset = 1
 support_pattern = zigzag
 support_roof_density = =support_interface_density
-support_roof_height = =layer_height * 4
 support_roof_line_width = =line_width
 support_top_distance = =support_z_distance
 support_xy_distance = 0.35

diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-petg-175_0.2mm.inst.cfg
@@ -36,7 +36,6 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 40
-raft_surface_wall_count = 2
 skin_overlap = 10
 speed_layer_0 = 15
 speed_print = 60

diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm.inst.cfg
@@ -56,16 +56,14 @@ support_bottom_enable = False
 support_infill_angles = [45 ]
 support_infill_rate = 12
 support_interface_density = 75
-support_interface_height = =layer_height * 4
-support_interface_material_flow = =material_flow * 0.9
+support_interface_material_flow = =support_material_flow
 support_interface_offset = 0.8
 support_interface_pattern = zigzag
 support_line_width = =line_width * 0.75
 support_material_flow = =material_flow * 0.9
 support_offset = 1
 support_pattern = zigzag
 support_roof_density = =support_interface_density
-support_roof_height = =layer_height * 4
 support_roof_line_width = =line_width
 support_top_distance = =support_z_distance
 support_xy_distance = 0.35

diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_basf-ultrafuse-316l-175_0.15mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_basf-ultrafuse-316l-175_0.15mm.inst.cfg
@@ -23,15 +23,13 @@ initial_layer_line_width_factor = 110
 layer_height_0 = =layer_height * 1.5
 material_flow_layer_0 = 110
 material_initial_print_temperature = 245
-retraction_amount = 1.5
-retraction_speed = 45
+retraction_amount = 0.75
+retraction_speed = 5
 roofing_line_width = 0.4
 skin_line_width = 0.45
 skin_material_flow_layer_0 = 110
 skin_overlap = 20.0
-skirt_brim_line_width = 1
 skirt_brim_minimal_length = 100.0
-skirt_height = 3
 speed_print = 25
 support_enable = False
 top_bottom_thickness = =layer_height * 2

diff --git a/...rces/quality/ultimaker_methodx/um_methodx_labs_jabil-tpe-sebs-1300-95a-175_0.2mm.inst.cfg b/...rces/quality/ultimaker_methodx/um_methodx_labs_jabil-tpe-sebs-1300-95a-175_0.2mm.inst.cfg
@@ -15,8 +15,14 @@ weight = -2
 [values]
 infill_sparse_density = 50
 raft_airgap = 0.22
+raft_interface_flow = 110
+raft_interface_infill_overlap = 25
 raft_interface_speed = =speed_print * 1/2
+raft_interface_z_offset = -0.1
+raft_surface_flow = 110
+raft_surface_infill_overlap = 50
 raft_surface_speed = =speed_print * 1/2
+raft_surface_z_offset = -0.075
 speed_layer_0 = =speed_print * 1/4
 speed_prime_tower = =speed_print * 3/4
 speed_print = 40

diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-petg-175_0.2mm.inst.cfg
@@ -36,7 +36,6 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 40
-raft_surface_wall_count = 2
 skin_overlap = 10
 speed_layer_0 = 15
 speed_print = 60

diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm.inst.cfg
@@ -56,16 +56,14 @@ support_bottom_enable = False
 support_infill_angles = [45 ]
 support_infill_rate = 12
 support_interface_density = 75
-support_interface_height = =layer_height * 4
-support_interface_material_flow = =material_flow * 0.9
+support_interface_material_flow = =support_material_flow
 support_interface_offset = 0.8
 support_interface_pattern = zigzag
 support_line_width = =line_width * 0.75
 support_material_flow = =material_flow * 0.9
 support_offset = 1
 support_pattern = zigzag
 support_roof_density = =support_interface_density
-support_roof_height = =layer_height * 4
 support_roof_line_width = =line_width
 support_top_distance = =support_z_distance
 support_xy_distance = 0.35

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-petg-175_0.2mm.inst.cfg
@@ -34,7 +34,6 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 40
-raft_surface_wall_count = 2
 skin_overlap = 10
 speed_layer_0 = 15
 speed_print = 60

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm.inst.cfg
@@ -54,16 +54,14 @@ support_bottom_enable = False
 support_infill_angles = [45 ]
 support_infill_rate = 12
 support_interface_density = 75
-support_interface_height = =layer_height * 4
-support_interface_material_flow = =material_flow * 0.9
+support_interface_material_flow = =support_material_flow
 support_interface_offset = 0.8
 support_interface_pattern = zigzag
 support_line_width = =line_width * 0.75
 support_material_flow = =material_flow * 0.9
 support_offset = 1
 support_pattern = zigzag
 support_roof_density = =support_interface_density
-support_roof_height = =layer_height * 4
 support_roof_line_width = =line_width
 support_top_distance = =support_z_distance
 support_xy_distance = 0.35

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-petg-175_0.2mm.inst.cfg
@@ -34,7 +34,6 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 40
-raft_surface_wall_count = 2
 skin_overlap = 10
 speed_layer_0 = 15
 speed_print = 60

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm.inst.cfg
@@ -54,16 +54,14 @@ support_bottom_enable = False
 support_infill_angles = [45 ]
 support_infill_rate = 12
 support_interface_density = 75
-support_interface_height = =layer_height * 4
-support_interface_material_flow = =material_flow * 0.9
+support_interface_material_flow = =support_material_flow
 support_interface_offset = 0.8
 support_interface_pattern = zigzag
 support_line_width = =line_width * 0.75
 support_material_flow = =material_flow * 0.9
 support_offset = 1
 support_pattern = zigzag
 support_roof_density = =support_interface_density
-support_roof_height = =layer_height * 4
 support_roof_line_width = =line_width
 support_top_distance = =support_z_distance
 support_xy_distance = 0.35

diff --git a/...es/quality/ultimaker_methodxl/um_methodxl_labs_jabil-tpe-sebs-1300-95a-175_0.2mm.inst.cfg b/...es/quality/ultimaker_methodxl/um_methodxl_labs_jabil-tpe-sebs-1300-95a-175_0.2mm.inst.cfg
@@ -15,8 +15,14 @@ weight = -2
 [values]
 infill_sparse_density = 50
 raft_airgap = 0.22
+raft_interface_flow = 110
+raft_interface_infill_overlap = 25
 raft_interface_speed = =speed_print * 1/2
+raft_interface_z_offset = -0.1
+raft_surface_flow = 110
+raft_surface_infill_overlap = 50
 raft_surface_speed = =speed_print * 1/2
+raft_surface_z_offset = -0.075
 speed_layer_0 = =speed_print * 1/4
 speed_prime_tower = =speed_print * 3/4
 speed_print = 40

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-petg-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-petg-175_0.2mm.inst.cfg
@@ -34,7 +34,6 @@ raft_surface_infill_overlap = 25
 raft_surface_line_spacing = 0.425
 raft_surface_line_width = 0.4
 raft_surface_speed = 40
-raft_surface_wall_count = 2
 skin_overlap = 10
 speed_layer_0 = 15
 speed_print = 60

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm.inst.cfg
@@ -54,16 +54,14 @@ support_bottom_enable = False
 support_infill_angles = [45 ]
 support_infill_rate = 12
 support_interface_density = 75
-support_interface_height = =layer_height * 4
-support_interface_material_flow = =material_flow * 0.9
+support_interface_material_flow = =support_material_flow
 support_interface_offset = 0.8
 support_interface_pattern = zigzag
 support_line_width = =line_width * 0.75
 support_material_flow = =material_flow * 0.9
 support_offset = 1
 support_pattern = zigzag
 support_roof_density = =support_interface_density
-support_roof_height = =layer_height * 4
 support_roof_line_width = =line_width
 support_top_distance = =support_z_distance
 support_xy_distance = 0.35