Add S5-GC30K support

[poligor84]

Good day.
Please add support for my grid inverter S5-GC30K support.
This is my inverter in Solis cloud:

and not all sensors are displayed in your application:


Thank you.

[davidrapan]

Hi @poligor84 did you tried load it with every profile there?

[poligor84]

Hi @poligor84 did you tried load it with every profile there?

What do you mean by "profile"?

[poligor84]

Hi @poligor84 did you tried load it with every profile there?

[davidrapan]

yes, I would suggest you to try it with every one of them...

[poligor84]

Hi @poligor84 did you tried load it with every profile there?

[davidrapan]

yes all the solis, sofar and zcs are in some cases very similar...

[poligor84]

yes all the solis, sofar and zcs are in some cases very similar...

Tried. The situation in general has not improved!

[davidrapan]

Uhh, so you can also try this integration: davidrapan/ha-solarman there is even more of them... otherwise it has to be added as a new one then, you could try to ask your manufacturer to give you modbus rtu documentation for your device...

[poligor84]

[poligor84]

Uhh, so you can also try this integration: davidrapan/ha-solarman there is even more of them... otherwise it has to be added as a new one then, you could try to ask your manufacturer to give you modbus rtu documentation for your device...

Ok. one second....

[davidrapan]

The profile is missing PV3 entities. 😉 I can try to add them in my integration if you help me locate those registers. 😉

[poligor84]

Uhh, so you can also try this integration: davidrapan/ha-solarman there is even more of them... otherwise it has to be added as a new one then, you could try to ask your manufacturer to give you modbus rtu documentation for your device...

I can't join for some reason?!

[davidrapan]

You have to disable the passthrough mode! It's only for ethernet sticks!

[poligor84]

пн, 9 вер. 2024 р. о 11:23 David Rapan ***@***.***> пише:

…

Enable debug and show me the logs please — Reply to this email directly, view it on GitHub <#654 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BKR52PIR2FI7X44FITEZY7LZVVLJBAVCNFSM6AAAAABN32A4I6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMZXGQ2TAOJVGU> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[davidrapan]

You have to disable the Solarman protocol passthrough mode! It's only for ethernet sticks!

[poligor84]

[davidrapan]

Yes.

[poligor84]

to disable пн, 9 вер. 2024 р. о 11:30 David Rapan ***@***.***> пише:

…

You have to disable the Solarman protocol passthrough mode! It's only for ethernet sticks! — Reply to this email directly, view it on GitHub <#654 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BKR52PN3DQMG5YTNO4U2H2DZVVMD5AVCNFSM6AAAAABN32A4I6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMZXGQ3DMMRSGM> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[poligor84]

Yes.

no work

[davidrapan]

Click on enable debug logging, try to add device. Wait few seconds and then click on it again. It will download a file. Post the file here please.

[poligor84]

пн, 9 вер. 2024 р. о 11:35 David Rapan ***@***.***> пише:

…

Click on enable debug logging, try to add device. Wait few seconds and then click on it again. It will download a file. Post the file here please. — Reply to this email directly, view it on GitHub <#654 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BKR52PJYD5WRFGV6B54FU5TZVVMTZAVCNFSM6AAAAABN32A4I6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMZXGQ3TKNZQGQ> . You are receiving this because you commented.Message ID: ***@***.***>

[poligor84]

[davidrapan]

?

[poligor84]

?

Maybe I have a conflict between two versions? and can't connect?

[davidrapan]

The one you downloaded as last is "active" so no. I told you what to do so we can find out what's wrong. I need the debug logs please. 😉

[poligor84]

The one you downloaded as last is "active" so no. I told you what to do so we can find out what's wrong. I need the debug logs please. 😉

home-assistant_solarman_2024-09-09T09-18-59.702Z.log

[davidrapan]

Yeah it has problems with some requested registers. You have to try use some different profile.

[poligor84]

Yeah it has problems with some requested registers. You have to try use some different profile.

Thanks, working on the profile 3P-4G!

[poligor84]

[davidrapan]

Wait for new version (I already committed the file if you know how to "replace" it manually) where will be added profile with more PV inputs. 😉

[poligor84]

Ok, thanks. пн, 9 вер. 2024 р. о 20:59 David Rapan ***@***.***> пише:

…

Wait for new version (I already committed the file if you know how to "replace" it manually) where will be added profile with more PV inputs. 😉 — Reply to this email directly, view it on GitHub <#654 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BKR52PPGCSO5QUBCFQJJRXTZVXOYNAVCNFSM6AAAAABN32A4I6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMZYG42DCMRYGM> . You are receiving this because you commented.Message ID: ***@***.***>

[davidrapan]

@poligor84 Beta version v24.09.09 contains profile named: solis_3p-4g+.yaml. You have to allow installing beta versions in HACS under 3 dots menu.

[poligor84]

Thanks, I will! [image: image.png] It works! Thank you!!! вт, 10 вер. 2024 р. о 00:19 David Rapan ***@***.***> пише:

…

@poligor84 <https://github.com/poligor84> Beta version v24.09.09 <https://github.com/davidrapan/ha-solarman/releases/tag/v24.09.09> contains profile named: solis_3p-4g+.yaml. You have to allow installing beta versions in HACS under 3 dots menu. — Reply to this email directly, view it on GitHub <#654 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BKR52PPKO6PXOIKJIYITPDDZVYGENAVCNFSM6AAAAABN32A4I6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMZZGEYDSMJYGE> . You are receiving this because you were mentioned.Message ID: ***@***.***>