-
Notifications
You must be signed in to change notification settings - Fork 4
Home
Rene K. Mueller edited this page Nov 19, 2018
·
35 revisions
% print3r [<options>] <command> <file1> ...
commands:
-
print: print the part (and perform necessary conversions to achieve print) -
slice: just slice the part to gcode with slic3r, slicer-pe or cura -
preview: preview print as gcode -
render: render image of print -
gcode: send Gcode from command-line -
gconsole: start Gcode console to interactively send commands
% print3r print cube.scad
% print3r print cube.stl
% print3r print cube.gcode
% print3r --scad print "cube(20)"
Just slice the part to Gcode:
% print3r --output=cube.gcode slice cube.scad
% print3r --output=cube.gcode slice cube.stl
Preview the resulting Gcode:
% print3r preview cube.scad
% print3r preview cube.stl
% print3r preview cube.gcode
% print3r --scad preview "cube(20)"
Render the Gcode into an image:
% print3r --output=test.png render cube.scad
% print3r --output=test.png --scad render "cube(20)"
% print3r --output=test.png render cube.stl
% print3r --output=test.png render cube.gcode
Print3r (print3r) 0.1.6 USAGE: [<options>] <cmd> <file1> [<...>]
options:
--verbose or -v or -vv increase verbosity
--quiet or -q no output except fatal errors
--baudrate=<n> set baudrate, default: 115200
--device=<d> set device, default: /dev/ttyUSB0
--slicer=<slicer> set slicer, default: slic3r
slic3r, slic3r-pe, cura-legacy, cura
--printer=<name> config of printer, default: default
--version display version and exit
--output=<file> define output file for 'slice' and 'render' command
--scad consider all arguments as actual OpenSCAD code (not files)
--scadlib=<files> define OpenSCAD files separated by "," or ":"
part preprocessing:
--random-placement place print randomly on the bed
--auto-center place print in the center
--multiply-part=<n> multiply part(s)
--scale=<x>,<y>,<z> scale part x,y,z (absolute if 'mm' is appended)
--scale=<f> scale part f,f,f
--rotate=<x>,<y>,<z> rotate x,y,z
--translate=<x>,<y>,<z> translate x,y,z
--mirror=<x>,<y>,<z> mirror x,y,z (0=keep, 1=mirror)
--<key>=<value> include any valid slicer option (e.g. slic3r --help)
commands:
print <file> [...] print (convert & slice & print) part(s) (.scad, .stl, .obj, .gcode)
slice <file> [...] slice file(s) to gcode (.scad, .stl, .amf, .obj, .3mf)
preview <file> [...] slice & preview (.scad, .stl, .obj, .gcode)
render <file> [...] render an image (use '--output=sample.png' or so)
gcode <code1> [...] send gcode lines
gconsole start gcode console
help
examples:
export PRINT3R "printer=my_printer" --OR-- setenv PRINT3R "printer=my_printer"
print3r slice cube.stl
print3r --layer-height=0.2 --output=test.gcode slice cube.stl
print3r --printer=ender3 --device=/dev/ttyUSB1 print test.gcode
print3r --printer=corexy --device=/dev/ttyUSB2 --nozzle-diameter=0.5 --layer-height=0.4 --fill-density=0 print cube.stl
print3r print cube.scad
print3r --scad print "cube(20)"
print3r gcode 'G28 X Y' 'G1 X60' 'G28 Z'
print3r gconsole
== Print3r: Gcode Console (gconsole) - use CTRL-C or 'exit' or 'quit' to exit
for valid Gcode see https://reprap.org/wiki/G-code
conf: device /dev/ttyUSB0, connected
> M115
...
Following slicers are supported via --slicer=<slicer>:
-
slic3r: Slic3r -
slic3r-pe: Slic3r Prusa Edition -
cura-legacy: CuraEngine 15.04 with old profiles -
cura: CuraEngine 3.x or later
/usr/share/print3r/slicer/<slicer>/base.ini contains the base settings for a particular slicer.
print command converts, slices and sends the resulting Gcode to the USB port of your choice.
-
--random-placementplace print randomly on the bed -
--auto-centerplace print in the center
-
--multiply-part=<n>multiply part(s)
-
--scale=<x>,<y>,<z>scale part x,y,z (absolute if 'mm' is appended) -
--scale=<f>scale part f,f,f
whereas each value can be:
-
<float>= multiplier, special case 0 = scale proportionally -
<float>% = multiplier in percent -
<float>mm = force to x mm absolute length and scale all axis set to 0 proportionally
% print3r --scale=2 cube.scad
% print3r --scale=200% cube.stl
% print3r --scale=2,1,0.5 cube.stl
% print3r --scale=20mm,0,0 box.stl
% print3r --scale=20mm,2,1 box.stl
% print3r --scale=300mm,30%,1 box.stl
-
--rotate=<x>,<y>,<z>rotate x,y,z where is each angle 0 .. 360 deg
% print3r --rotate=90,0,0 toy.scad
% print3r --rotate=90,0,0 toy.stl
-
--translate=<x>,<y>,<z>translate x,y,z whereas each value in [mm], disables--auto-centerand--random-placement.
% print3r --translate=-40,20,0 cube.stl
-
--mirror=<x>,<y>,<z>mirror x,y,z (0=keep, 1=mirror)
% print3r --mirror=1,0,0 toy.stl
% print3r --mirror=0,1,0 mount.stl
% print3r --scale=1,-1,1 mount.stl
slice command converts and slices the model to Gcode file, best set --output=file.gcode to define the filename.
preview command converts, slices and display the resulting Gcode with yagv Gcode viewer.
render command converts, slices and renders the resulting Gcode into a PNG image, best set --output=test.png to define the filename.
gcode command allows to send Gcode in the command line directly:
% print3r gcode 'G28 X Y'
% print3r gcode 'G28 Z'
gconsole command launches an interactive console to send Gcode and custom commands to USB connected printer:
== Print3r: Gcode Console (gconsole) - use CTRL-C or 'exit' or 'quit' to exit
for valid Gcode see https://reprap.org/wiki/G-code
conf: device /dev/ttyUSB0, connected
>
- any valid Gcode line
- in
gconsole/commandsreside a few gcode script which simplify handling:-
home,homex,homey,homez,hx,hy,hz: homing all or individual axis -
left <n>,right <n>move left or right (X-axis) relatively -
up <n>,down <n>move up or down (Z-axis) relatively -
forward <n>,back <n>move forward or back (Y-axis) relatively -
x <n>,y <n>,z <n>move each axis absolutely -
nozzle <temp>set nozzle temperature -
bed <temp>set bed temperature -
offturn everything off (motors, nozzle, bed)
-
> homex
send <G28 X>
-----
X:0.00 Y:0.00 Z:5.00 E:0.00 Count X:0 Y:0 Z:16000
ok
.
> right 10
send <G91>
-----
X:0.00 Y:0.00 Z:5.00 E:0.00 Count X:0 Y:0 Z:16000
ok
.
send <G1 X10>
-----
ok
.
> _