| title | nav_order |
|---|---|
Release notes |
99 |
| Development Board | Number of Applications |
|---|---|
| dsPICDEM™ MCLV-2 Low Voltage Development Board | 5 |
| dsPICDEM™ MCHV-3 High Voltage Development Board | 3 |
| MCS MCLV-48V-300W Development Board | 2 |
- Fixed the SMO library for bidirectional control
- Added ZS/MT Hybrid position estimation based FOC project on MCLV-48V-300W board
- Updated the example code with latest libraries
- same as v3.1.0
- motor_control v3.11.0
- MPLAB X IDE v6.20
- MPLAB XC32 C/C++ Compiler v4.45
- MPLAB X IDE plug-ins:
- MPLAB Harmony Configurator (MCC) v5.7.1
- X2CScope v1.6.6
| Development Board | Number of Applications |
|---|---|
| dsPICDEM™ MCLV-2 Low Voltage Development Board | 7 |
| dsPICDEM™ MCHV-3 High Voltage Development Board | 5 |
- Updated the package.yml file
- same as v3.1.0
- motor_control v3.10.0
- x2c v1.4.0
- MPLAB X IDE v6.10
- MPLAB XC32 C/C++ Compiler v4.30
- MPLAB X IDE plug-ins:
- MPLAB Harmony Configurator (MCC) v5.3.7
- X2CScope v1.3.3.
| Development Board | Number of Applications |
|---|---|
| dsPICDEM™ MCLV-2 Low Voltage Development Board | 7 |
| dsPICDEM™ MCHV-3 High Voltage Development Board | 5 |
- Added ZS/MT hex files for ZS/MT based sensorless FOC demonstration
- MISRA-C Compliance for motor control files
- Deprecated static PLL based sensorless FOC project
- Deprecated static encoder based sensored FOC project
- same as v3.1.0
- motor_control v3.10.0
- x2c v1.4.0
- MPLAB X IDE v6.10
- MPLAB XC32 C/C++ Compiler v4.30
- MPLAB X IDE plug-ins:
- MPLAB Harmony Configurator (MCC) v5.3.7
- X2CScope v1.3.3.
| Development Board | Number of Applications |
|---|---|
| dsPICDEM™ MCLV-2 Low Voltage Development Board | 7 |
| dsPICDEM™ MCHV-3 High Voltage Development Board | 4 |
- Added PLL based sensorless FOC on MCHV3 in Harmony QSpin
- Added Encoder based sensored FOC on MCHV3 in Harmony QSpin
- Added PLL based PMSM FOC with Hall Sensor Startup example
- same as v3.1.0
- bsp v3.14.0
- motor_control v3.9.0
- x2c v1.3.0
- mcc H3 Library v1.1.5
- MPLAB X IDE v6.00
- MPLAB XC32 C/C++ Compiler v4.10
- MPLAB X IDE plug-ins:
- MPLAB Harmony Configurator (MCC) v5.1.17
- X2CScope v1.3.3.
- For MCHV3 board programming and debugging, use High Voltage Motor Control Isolated Debugger Card
| Development Board | Number of Applications |
|---|---|
| dsPICDEM™ MCLV-2 Low Voltage Development Board | 6 |
| dsPICDEM™ MCHV-3 High Voltage Development Board | 3 |
- Added Motor Control Plant generated code for motor control firmware for PLL based sensorless FOC on MCLV2
- Added Motor Control Plant generated code for motor control firmware for Encoder based sensored FOC on MCLV2
- Migrated MHC generated motor control firmware to MCC generated motor control firmware
- same as v3.1.0
- csp v3.11.0
- bsp v3.11.1
- x2c v1.2.0
- motor_control v3.8.0
- dev_packs v3.11.0
- mcc v1.1.0
- MPLAB X IDE v6.00
- MPLAB XC32 C/C++ Compiler v4.00
- MPLAB X IDE plug-ins:
- MPLAB Harmony Configurator (MCC) v5.1.2
- X2CScope v1.3.0.
| Development Board | Number of Applications |
|---|---|
| dsPICDEM™ MCLV-2 Low Voltage Development Board | 4 |
| dsPICDEM™ MCHV-3 High Voltage Development Board | 3 |
- Added static example project - pmsm_foc_hall_sam_e54 on MCLV2 board
-
ATSAME54 Motor Control Plugin Module based demos may see noise coupling on the ADC channels resulting in motor instability/stall.
- This issue can be resolved by ensuring that R1 (0 ohm) resistor is populated.
-
Isolated EDBG Card
- The Isolated EDBG Card may appear "grayed out" (disabled) under the list of tools in MPLABX v5.45. In order to resolve this issue, please go to Tools -> Options ->Embedded->Generic Settings and enable "Exclude device checks for kits" by selecting the check box.
- If programming failure occurs with message "java.lang.RuntimeException:RDDI_DAP_OPERATION_FAILED", then reset the Isolated EDBG Card's configuration by Go to File -> Project Properties -> EDBG -> Reset
-
pmsm_foc_encoder_sam_e54_mchv3 application running on dsPICDEM MCHV-3 requires increasing bandwidth of the quadrature encoder signal filter to maintain signal integrity of quadrature sensor signals at higher motor speeds. Without these modifications, motor operation may fail at higher speeds.
- Reduce the capacitance value of C25, C26 and C27 from 100pF to 10pF 50V NPO 0805
- csp v3.9.1
- x2c v1.1.4
- motor_control v3.7.0
- dev_packs v3.9.0
- mhc v3.8.0
- MPLAB X IDE v5.50
- MPLAB XC32 C/C++ Compiler v3.01
- MPLAB X IDE plug-ins:
- MPLAB Harmony Configurator (MHC) v3.6.4
- X2CScope v1.3.0.
Applications migrated from motor_control repository to this application repository for SAM D5x/E5x family.
| Development Board | Number of Applications |
|---|---|
| dsPICDEM™ MCLV-2 Low Voltage Development Board | 3 |
| dsPICDEM™ MCHV-3 High Voltage Development Board | 3 |
- csp v3.8.3
- x2c v1.1.3
- motor_control v3.6.0
- dev_packs v3.8.0
- mhc v3.6.5
-
ATSAME54 Motor Control Plugin Module based demos may see noise coupling on the ADC channels resulting in motor instability/stall.
- This issue can be resolved by ensuring that R1 (0 ohm) resistor is populated.
-
Isolated EDBG Card
- The Isolated EDBG Card may appear "grayed out" (disabled) under the list of tools in MPLABX v5.45. In order to resolve this issue, please go to Tools -> Options ->Embedded->Generic Settings and enable "Exclude device checks for kits" by selecting the check box.
- If programming failure occurs with message "java.lang.RuntimeException:RDDI_DAP_OPERATION_FAILED", then reset the Isolated EDBG Card's configuration by Go to File -> Project Properties -> EDBG -> Reset
-
pmsm_foc_encoder_sam_e54_mchv3 application running on dsPICDEM MCHV-3 requires increasing bandwidth of the quadrature encoder signal filter to maintain signal integrity of quadrature sensor signals at higher motor speeds. Without these modifications, motor operation may fail at higher speeds.
- Reduce the capacitance value of C25, C26 and C27 from 100pF to 10pF 50V NPO 0805
- MPLAB X IDE v5.45
- MPLAB XC32 C/C++ Compiler v2.50
- MPLAB X IDE plug-ins:
- MPLAB Harmony Configurator (MHC) v3.6.2
- X2CScope v1.3.0.