Bug Nextion not connected and screensaver time not working correct

[Mauricewillemstein]

TFT Version

v4.4.0.dev7

Firmware Version

v4.4.0.dev7

Blueprint Version

v4.4.0.dev7

Panel Model

EU

What is the bug?

Hi, i instaled v4.4.0.dev7 and found some bugs.
After upload the esp32, nextion is cot connected.
Upload fails, but workind after setting the baudrate for nextion on 115200.
After a while it's uploading. Then there is no problem setting it to fastest baudrate.
Also the screensaver does not work, only after one time switching the display on and off.
The hardware relays still are pending in the logfile

These issues are fixed this way buy maybe you can take a look whats going on.

Also included the logfile for you.

Regards Maurice

Steps to Reproduce

No response

Your Panel's YAML

No response

ESPHome Logs

logs_zolder_run (1).txt

Home Assistant Logs

No response

[Mauricewillemstein]

The notification sound also is not working, and using the buzzer-gain does not play sound when sliding.

[13:45:30][D][number:054]: 'Buzzer - Gain' - Setting number value
[13:45:30][D][number:113]: New number value: 53.000000
[13:45:30][C][rtttl:030]: Rtttl:
[13:45:30][C][rtttl:031]: Gain: 0.947000
[13:45:30][D][number:012]: 'Buzzer - Gain': Sending state 53.000000

[edwardtfn]

The hardware relays still are pending in the logfile

I don't understand why this is still happening.. I cannot duplicate it here. 😞
Could you please double check your Home Assistant logs (Settings > System > Logs) for anything that could be related to the Blueprint/Automation for your panel?

[Mauricewillemstein]

Here are some logs.
If you need an other specific logs or you want me to test something let me know.
I have installed the latest dev and the problem of the HW-relais is still there
logs_zolder_logs.txt
home-assistant_2024-11-23T07-31-57.596Z.log
5c53de3b_esphome-dev_2024-11-23T07-28-28.746Z.log

[edwardtfn]

I believe the screensaver issue was fixed in DEV, but this time you have to update both the Blueprint and ESPHome to test, although I haven't changed the version number.