Add support for esp32-2432s022 please

[RekOUF]

Hi there !

i tryed myself but only get blank white screens
i think for some dev in here it's a few minutes to fix.

some more info :

from smartdisplay-demo :

"build": {
"arduino": {
"ldscript": "esp32_out.ld"
},
"core": "esp32",
"extra_flags": [
"'-D ARDUINO_ESP32_DEV'",
"'-D ESP32_2432S022N'",
"'-D DISPLAY_WIDTH=240'",
"'-D DISPLAY_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(DISPLAY_WIDTH*DISPLAY_HEIGHT/8)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D GPIO_BCKL=0'",
"'-D DISPLAY_ST7789_I80'",
"'-D ST7789_I80_BUS_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
"'-D ST7789_I80_BUS_CONFIG_DC=16'",
"'-D ST7789_I80_BUS_CONFIG_WR=4'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D8=15'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D9=13'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D10=12'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D11=14'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D12=27'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D13=25'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D14=33'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D15=32'",
"'-D ST7789_I80_BUS_CONFIG_BUS_WIDTH=8'",
"'-D ST7789_I80_BUS_CONFIG_MAX_TRANSFER_BYTES=(LVGL_BUFFER_PIXELS * sizeof(lv_color_t))'",
"'-D ST7789_I80_BUS_CONFIG_PSRAM_TRANS_ALIGN=64'",
"'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=4'",
"'-D ST7789_IO_I80_CONFIG_CS_GPIO_NUM=17'",
"'-D ST7789_IO_I80_CONFIG_PCLK_HZ=12000000'",
"'-D ST7789_IO_I80_CONFIG_TRANS_QUEUE_DEPTH=10'",
"'-D ST7789_IO_I80_CONFIG_LCD_CMD_BITS=8'",
"'-D ST7789_IO_I80_CONFIG_LCD_PARAM_BITS=8'",
"'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_IDLE_LEVEL=0'",
"'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_CMD_LEVEL=0'",
"'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DUMMY_LEVEL=0'",
"'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DATA_LEVEL=1'",
"'-D ST7789_IO_I80_CONFIG_FLAGS_CS_ACTIVE_HIGH=0'",
"'-D ST7789_IO_I80_CONFIG_FLAGS_REVERSE_COLOR_BITS=0'",
"'-D ST7789_IO_I80_CONFIG_FLAGS_SWAP_COLOR_BYTES=0'",
"'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_ACTIVE_NEG=0'",
"'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_IDLE_LOW=0'",
"'-D ST7789_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'",
"'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_RGB'",
"'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
"'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
"'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",
"'-D ST7789_RD_GPIO=2'",
"'-D DISPLAY_SWAP_XY=false'",
"'-D DISPLAY_MIRROR_X=false'",
"'-D DISPLAY_MIRROR_Y=false'",
"'-D BOARD_HAS_TF'",
"'-D TF_CS=5'",
"'-D TF_SPI_MOSI=23'",
"'-D TF_SPI_SCLK=18'",
"'-D TF_SPI_MISO=19'",
"'-D BOARD_HAS_SPEAK'",
"'-D SPEAK=26'"
],
"f_cpu": "240000000L",
"f_flash": "40000000L",
"flash_mode": "dio",
"mcu": "esp32",
"variant": "esp32"
},
"connectivity": [
"wifi",
"bluetooth",
"ethernet",
"can"
],
"debug": {
"openocd_board": "esp-wroom-32.cfg"
},
"frameworks": [
"arduino",
"espidf"
],
"name": "esp32-2432S022N",
"upload": {
"flash_size": "4MB",
"maximum_ram_size": 327680,
"maximum_size": 4194304,
"require_upload_port": true,
"speed": 460800
},
"url": "https://www.aliexpress.com/item/1005006284154750.html",
"vendor": "Sunton"
}

https://github.com/rzeldent/esp32-smartdisplay-demo

https://github.com/lsdlsd88/2.2inch_ESP32-2432S022/tree/main/2.2inch_ESP32-2432S022

[RekOUF]

Hi there

i changed the wt32 device display settings to

#define SCR 8
class LGFX : public lgfx::LGFX_Device
{
lgfx::Panel_ST7789 _panel_instance;
lgfx::Bus_Parallel8 _bus_instance;
lgfx::Light_PWM _light_instance;
lgfx::Touch_FT5x06 _touch_instance;

public:
LGFX(void)
{
{
auto cfg = _bus_instance.config();
cfg.freq_write = 25000000;
cfg.pin_wr = 4;
cfg.pin_rd = 2;
cfg.pin_rs = 16;

cfg.pin_d0 = 15;
cfg.pin_d1 = 13;
cfg.pin_d2 = 12;
cfg.pin_d3 = 14;
cfg.pin_d4 = 27;
cfg.pin_d5 = 25;
cfg.pin_d6 = 33;
cfg.pin_d7 = 32;

_bus_instance.config(cfg);
_panel_instance.setBus(&_bus_instance);

}

{
auto cfg = _panel_instance.config();

cfg.pin_cs = 17;
cfg.pin_rst = -1;
cfg.pin_busy = -1;

cfg.panel_width = 240;
cfg.panel_height = 320;
cfg.offset_x = 0;
cfg.offset_y = 0;
cfg.offset_rotation = 0;
// cfg.dummy_read_pixel = 8;
// cfg.dummy_read_bits = 1;
cfg.readable = false;
cfg.invert = false;
cfg.rgb_order = false;
cfg.dlen_16bit = false;
cfg.bus_shared = true;

_panel_instance.config(cfg);

}

setPanel(&_panel_instance);
}
};

now i have hansolominer working only there is something wrong some text is off the screen