HowTo: flash the prerelease 1.7.0 (working for NerdminerV2)

[TylonHH]

So, as here some issues with flashing the prerelease I like to show how it worked for me.

I have the common ESP-S3 Nerdminer V2 with Display.

1. Go to https://github.com/BitMaker-hub/NerdMiner_v2/releases/tag/nerdminer-prerelease-V1.7.0
2. get four files of your device (eg. NerminerV2)

• boot_app0.bin
• NerdminerV2_bootloader.bin
• NerdminerV2_firmware.bin
• NerdminerV2_partitions.bin

3. Open the https://espressif.github.io/esptool-js/ Flash Tool within chrome browser icognito
4. connect your device via USB
5. hit connect, select the correct USB Port
6. add the four downloaded files in this order at this adress

0x0000 bootloader.bin
0x8000 partitions.bin
0x10000 firmware.bin
0xe000 boot_app0.bin

Then it should look like this:

7. click Program
8. when finish -> IMPORTANT press the reset button on the side of the device! Not the button near the display.
9. When this worked for you give feedback

[stl1988]

For v1.7.0, these files don't exist. For v1.6.4, I got it running using the "Nerminer" file over the Nerdminer flasher.

[TylonHH]

What files doesn't exit? You checked the files under 1st point?

This manual is explicit for prerelease 1.7.0